Month: April 2018

How to Specify Netgear Nighthawk MR1100 Mobile Router Network Settings

This chapter provides information about how to configure various aspects of the Netgear Nighthawk MR1100 mobile router such as WiFi settings, WAN settings, and router settings. The chapter covers the following topics:

  • Select a WiFi Profile
  • WiFi Settings
  • Use WPS to Connect to the Mobile Router WiFi Network
  • Universal Plug-N-Play
  • Enable IP Pass-Through Mode
  • Specify the IP Addresses That the Mobile Router Assigns
  • Disable the DHCP Server Feature in the Mobile Router

 

Select a WiFi Profile

You can view or change the mobile router WiFi settings. The following WiFi profiles are available:

  • Dual-band WiFi (2.4 GHz and 5 GHz). Connect 2.4 GHz and 5 GHz devices to transfer data at higher throughputs.
  • 2.4 GHz WiFi. Use only the 2.4 GHz WiFi band.
  • 5 GHz WiFi. Use only the 5 GHz WiFi band.
  • Guest WiFi. Share your WiFi with temporary visitors without exposing the devices on your network or letting visitors access the mobile router web page.
  • Turn Off WiFi. This turns off the WiFi signal from the mobile router. With this setting, you can only connect to the mobile router with a tethered USB connection.

Note: Whenever you change WiFi settings, any devices connected to the mobile router are disconnected and might need to be reconnected.

 

 

 

Select a WiFi Profile From the NETGEAR Mobile App

To select a WiFi profile:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Settings > WiFi > WiFi Profiles.

The WiFi Profiles displays.

  1. Tap a WiFi network to select it.
  2. Tap SAVE.

Your settings are saved.

 

Select a WiFi Profile from a Web Browser

To select a WiFi profile:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Setup > WiFi Profiles.

The WiFi Profiles page displays.

  1. Select the Enable button for the WiFi profile that you want to use.
  2. Click the Apply button.

The selected WiFi profile is activated.

 

 

 

WiFi Settings

Note:Whenever you change WiFi settings, any devices connected to the mobile router are disconnected and might need to be reconnected.

Specify WiFi Settings From the NETGEAR Mobile App

To specify the WiFi settings from the NETGEAR Mobile app:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap WiFi.

The WiFi page displays.

  1. Change the settings.

Your settings are saved.

 

Specify WiFi Settings from a Web Browser

To select a WiFi profile or create a custom profile on the mobile router web page:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Setup > Wireless.

The Wireless Network page displays the settings for the 2.4 GHz and the 5 GHz WiFi bands and global WiFi settings.

  1. Change the settings as needed.

By default, the Broadcast WiFi Name SSID check box is selected for each network so that the WiFi network name displays in the list of WiFi networks for computers or mobile devices.

  1. To change the global WiFi settings, adjust the WiFi standby time or the WiFi range.
  2. Click the Apply button.

Your settings are saved.

When you change your profile options (including disabling or enabling either WiFi network), any devices connected to the mobile router are disconnected and might need to be reconnected.

 

 

 

Use WPS to Connect to the Mobile Router WiFi Network

To connect to the mobile router WiFi network, you can find the network and connect or you can use WPS. If the device is WPS enabled, you can use the WPS method to connect the device without using the WiFi password.

Use WPS from the NETGEAR Mobile App

To add a WPS-enabled WiFi device from the NETGEAR Mobile app:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap WiFi.

The WiFi page displays.

  1. Tap WPS.
  2. Within two minutes, tap or click the WPS button on the mobile device or computer that you want to connect.

Your mobile router and the mobile device or computer communicate and establish the connection.

 

Use WPS From a Web Browser

To add a WPS-enabled WiFi device from the mobile router web page:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Wireless or Guest Network.

The Wireless or Guest Network page displays.

  1. Click the WPS button for the network.

The WPS page displays.

  1. Choose the WPS method that you want to use:
  • WPS button pairing. If the device you want to connect includes a WPS button, click the WPS button pairing button and, within two minutes (120 seconds), press the device’s WPS button.
  • Enter WPS PIN. If a WPS pin is associated with the device that you want to connect, click the Enter WPS PIN button and enter the device’s WPS PIN.

Your mobile router and the wireless device communicate and establish the connection.

 

 

Universal Plug-N-Play

Universal Plug N Play (UPnP) helps devices, such as Internet appliances and computers, access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network. UPnP is beneficial when you use applications such as multiplayer gaming, peer-to-peer connections, or real-time communications such as instant messaging or remote assistance (a feature in Windows XP). By default, UPnP is enabled in the mobile router.

Turn UPnP Off or On From the NETGEAR Mobile App

By default, UPnP is enabled in the mobile router, but you can disable and enable this feature.

To disable or enable Nighthawk M1 UPnP:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Settings.

The Settings page displays.

  1. Tap General.

The General page displays.

  1. Tap the Enable UPnP slider.

UPnP toggles off or on.

 

 

Turn UPnP Off or On From a Web Browser

By default, UPnP is enabled in the mobile router, but you can disable and enable this feature.

To disable or enable UPnP:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Advanced Settings > Other.

The Router Settings page displays.

  1. Select the UPnP Disable or Enable button.

UPnP toggles off and on.

  1. Click the Apply button.

Your settings are saved.

 

 

Enable IP Pass-Through Mode

To turn off the mobile router functionality and assign the network IP address directly to the attached device, enable IP pass-through.

If you make this change, the attached device restarts using a different driver configuration.

WARNING: If you enable this feature, WiFi is disabled and you must use a USB cable to tether the device.

Note: This feature is available to Windows computer users. If you are a Mac user, do not enable this option because you will be unable to access your device.

To enable IP pass through mode:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Setup > Router Setup.

The ROUTER SETUP page displays.

  1. Select the IP PASSTHROUGH ON button.

The default selection is AUTO.

 

 

Specify the IP Addresses That the Mobile Router Assigns

By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The router assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN. The assigned default gateway address is the LAN address of the router.

These addresses must be part of the same IP address subnet as the router’s LAN IP address. Using the default addressing scheme, define a range between 192.168.1.2 and 192.168.1.254, although you can save part of the range for devices with fixed addresses.

To specify the pool of IP addresses that the mobile router assigns:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Setup > Router Setup.

The ROUTER SETUP page displays.

  1. Enter the starting IP address and the ending IP address.
  2. Click the Apply button.

Your settings are saved.

 

 

 

Disable the DHCP Server Feature in the Mobile Router

By default, the mobile router acts as a DHCP server. The router assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN. The assigned default gateway address is the LAN address of the router.

You can use another device on your network as the DHCP server, or specify the network settings of all your computers.

To disable the DHCP server feature in the mobile router:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Setup > Router Setup.

The ROUTER SETUP page displays.

  1. Clear the Use NETGEAR Mobile as DHCP server check box.
  2. Click the Apply button.

Your settings are saved.

  1. (Optional) If this service is disabled and no other DHCP server is on your network, set your computer IP addresses manually so that they can access the mobile router.

Netgear M1 Share Media and Storage

You can use the Netgear M1 mobile router to share media and storage devices. The mobile router supports MyMedia on mobile devices. You can insert a USB storage device in the mobile router USB type A port and you can install a micro SD card in the mobile router.

The chapter includes the following sections:

  • Manage Shared Storage Devices
  • Install a Micro SD Card
  • View Storage Device Usage and Capacity
  • Upload Media Files to Mobile Router Storage
  • Play Media

 

Manage Shared Storage Devices

You can insert a USB storage device in the mobile router USB type A port and you can install a micro SD card in the mobile router. You can access the files and folders on these devices from computers and mobile devices that are connected to the mobile router network.

USB Device Requirements

The router works with most USB-compliant external flash and hard drives. Some USB external hard drives and flash drives require you to load the drivers onto the computer before the computer can access the USB device. Such USB devices do not work with the LTE router.

The router supports the following file system types for full read/write access:

  • FAT16
  • FAT32

When you purchase a USB storage device, the package typically identifies its format. For information about how to format a USB storage device using a Windows or Mac computer, consult the help instructions for your computer or operating system.

 

 

 

Connect a USB Storage Device

You can access and share a USB storage device connected to the mobile router USB type A port. (If your storage device uses special drivers, it is not compatible.) You can continue use the micro USB port to charge the mobile router or for a tethered connection.

To connect a USB storage device:

  1. Insert your USB storage drive into a USB port on the router.
  2. If your USB device uses a power supply, connect it.

You must use the power supply when you connect the USB device to the router.

When you connect the USB device to the router USB port, it might take up to two minutes before it is ready for sharing.

 

 

Micro SD Card Requirements

The mobile router supports SD cards up to 128 GB in the following formats:

  • FAT
  • FAT-16
  • FAT-32

———————————————————–Note: For information about how to format a USB storage device using a computer or other device, consult the instructions that came with your computer or device.

———————————————————–

Formatting the USB storage device erases all data on the device.

 

 

 

Install a Micro SD Card

Micro SD cards are sold separately.

To install the micro SD card:

  1. Obtain a micro SD card (sold separately).
  2. Make sure that power to the mobile router is off.
  3. Remove the cover on the bottom of the mobile router.

Place your thumbs on the arrows on the cover and press down while sliding the cover up.

  1. Insert the micro SD card into the micro SD slot.

Replace the mobile router cover.

 

 

 

View Storage Device Usage and Capacity

You can view the storage capacity for a USB storage device attached to the mobile router and a micro SD card installed in the mobile router.

To view storage device capacity and usage:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Storage.

The Storage page displays the used and available storage for each connected device.

 

 

Upload Media Files to Netgear Nighthawk Mobile Router Storage

You can upload media files to either a micro SD card or a USB storage device connected to the mobile router. Micro SD cards and USB drives are sold separately.

To upload media files onto a storage device:

  1. Insert the storage device into the mobile router.

You can install a micro SD card and you can attach a USB storage device to the USB port. If your USB device uses a power supply, connect it. You must use the power supply when you connect the USB device to the router.

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Click the MyMedia tab.
  2. Drag and drop your files on to the page.

 

 

 

 

Play Media

The NETGEAR Mobile app includes a MyMedia shortcut that displays categories of supported media types to play back. You can connect any DLNA-compatible client to the mobile router. This includes computers running Windows Media Player and other DLNA–enabled devices such as smart TVs.

To play media using the NETGEAR Mobile app:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Storage.

The Storage page displays the used and available storage for each connected device.

  1. Tap MyMedia.

The MyMedia shortcut displays categories of supported media types to play back.

  1. Select the media to play.

A list of devices on the network displays. You are prompted to select a device on which to play your media.

  1. Select the device on which to play the media.

The media plays on the selected device.

How to Update Netgear Nighthawk M1 Firmware

There are three methods to update the Nighthawk M1 firmware as below:

Update Netgear Nighthawk M1 Mobile Router Firmware

The Netgear Nighthawk M1 mobile router automatically checks for new firmware updates. If an update becomes available, the mobile router displays an alert. You can also check for updates manually without receiving an alert.

Update Firmware from an Alert

To update the firmware:

  1. Open the alert.
  2. Click the Download button.

When the download completes, the mobile router displays an alert with an Install now button.

  1. Click the Install now button.

The update installs. The mobile router reboots automatically and uses the new software.

 

Update Firmware from the NETGEAR Mobile App

To update firmware using the NETGEAR Mobile app:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Settings > Firmware.

The Firmware page displays.

  1. Tap CHECK FOR UPDATE.

The mobile router checks for firmware updates. If an updated is available, it is automatically downloaded.

  1. Tap INSTALL UPDATE.

After the update install completes, a success message displays.

 

Update the Firmware from the Web Page

To update firmware using the mobile router web page:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays. If a firmware update is available, a blue INSTALL NEW FIRMWARE link displays on the right.

  1. Click the INSTALL NEW FIRMWARE link.

The update downloads.

  1. Follow the onscreen instructions to install the update.

After the update completes, the mobile router reboots.

 

Check more user manual about Netgear Nighthawk M1 MR1100 Settings here:

https://www.4gltemall.com/netgear-nighthawk-m1-mr1100.html

How to Manage Nighthawk M1 Telstra Mobile Router Network

This chapter describes the Telstra Nighthawk M1 router settings for administering and maintaining your router and home network.

The chapter includes the following sections:

  • View the Network Status
  • View Mobile Router Device Status
  • View WiFi Details
  • View a Network Map
  • View Connected Devices
  • Update the Mobile Router Firmware
  • Change the admin Password
  • Manage SMS Messages
  • LED Settings
  • Back Up and Restore the Mobile Router Settings
  • Factory Reset
  • Reboot the Mobile Router
  • Power Off the Mobile Router
  • View Details About Your Mobile Router

 

View the Network Status

To view the network status:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select SETTINGS> Mobile Router Status > ACCOUNT.

The Network Status page displays.

 

 

View Mobile Router Device Status

You can view details about the status of your modem router.

View Mobile Router Device Status From the NETGEAR Mobile App

To view device status:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Settings.

The Settings page displays.

  1. Tab About.

The About page displays.

 

 

View Mobile Router Device Status From a Web Browser

To view device status:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select SETTINGS > Mobile Router Status > DEVICE.

The Device Status page displays.

 

 

View WiFi Details

To view WiFi status:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select SETTINGS > Mobile Router Status > WIFI DETAILS.

The WIFI DETAILS page displays.

 

 

View a Network Map

The network map shows the status of your mobile router network and your Internet connection.

View a Network Map from the NETGEAR Mobile App

To view a network map:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Network Map.

The network map displays.

 

View a Network Map from a Web Browser

To view a network map:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays a network map.

 

 

View Connected Devices

You can view a list of devices that are connected to your mobile router.

View the Connected Devices on the LCD

To view the connected devices from the LCD:

To wake the device, press the Power button.

The screen shows the number of connected devices.

 

View the Connected Devices from the NETGEAR Mobile App

To view the connected devices from the NETGEAR Mobile app:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Connected Devices.

A list of connected devices displays.

 

 

 

 

View the Connected Devices from a Web Browser

To view the connected devices from the mobile router web page:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

A list of devices connected to the main WiFi and guest WiFi networks displays on the dashboard.

If you notice a WiFi device that you do not recognize, you can block that device from connecting to your WiFi network.

 

 

 

Update Netgear Nighthawk M1 Mobile Router Firmware

The mobile router automatically checks for new firmware updates. If an update becomes available, the mobile router displays an alert. You can also check for updates manually without receiving an alert.

Update Firmware From an Alert

To update the firmware:

  1. Open the alert.
  2. Click the Download button.

When the download completes, the mobile router displays an alert with an Install now button.

  1. Click the Install now button.

The update installs. The mobile router reboots automatically and uses the new software.

 

Update Firmware from the NETGEAR Mobile App

To update firmware using the NETGEAR Mobile app:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Settings > Firmware.

The Firmware page displays.

  1. Tap CHECK FOR UPDATE.

The mobile router checks for firmware updates. If an updated is available, it is automatically downloaded.

  1. Tap INSTALL UPDATE.

After the update install completes, a success message displays.

 

Update the Firmware from the Web Page

To update firmware using the mobile router web page:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays. If a firmware update is available, a blue INSTALL NEW FIRMWARE link displays on the right.

  1. Click the INSTALL NEW FIRMWARE link.

The update downloads.

  1. Follow the onscreen instructions to install the update.

After the update completes, the mobile router reboots.

 

 

 

Change the admin Password

To change admin password:

The admin password is used to log in to the mobile router with the user name admin. This password is not the one that you use for WiFi access.

When you used the NETGEAR Mobile app to set up the mobile router, you changed the admin password. To change it again, you must use web browser access from a computer. The ideal password contains no dictionary words from any language and contains uppercase and lowercase letters, numbers, and symbols.

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Administration > Set Password.

The Set Password page displays.

  1. Enter your current password in the Old Password field.
  2. Enter your new password in the New Password field and the Repeat Password field.

Your settings are saved.

 

Manage SMS Messages

You can view messages from the NETGEAR Mobile app or the mobile router web page.

Manage Messages from the NETGEAR Mobile App

To manage SMS messages from the NETGEAR Mobile app:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Messages.

The Messages page displays.

  1. To read the full text of a message, tap the message.
  2. To delete a message, tap and hold the message to select it, and then tap the Delete button.

The message is deleted.

 

 

View or Delete Messages from a Web Browser

To view or delete SMS messages from the mobile router web page:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays a list of messages, showing the first portion of the text.

  1. Click a message to read the full text.
  2. To delete a message, click the message and then click the Delete button.

The message is deleted.

 

 

 

LED Settings

You can turn the LED blinking off and on.

To turn the LED blinking on or off:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. In the upper right corner, click the menu icon.

The menu opens.

  1. Select LED Settings.

The LED Settings page displays.

  1. Select the Enable LED blinking or Disable LED blinking radio button.
  2. Click the Apply button.

Your settings are saved.

 

 

Back Up and Restore the Mobile Router Settings

You can back up and restore mobile router settings. Backing up and restoring is useful if you use more than one device and you want the same settings on all of your devices. You can also save your settings before resetting to factory defaults or changing the settings.

Back Up the Mobile Router Settings

To back up mobile router settings:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Administration > Backup.
  2. Click the BACKUP Settings button.

By default, the file (export.cfg) is saved to your Downloads folder.

 

 

 

 

Restore the Mobile Router Settings

To restore mobile router settings:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Administration > Backup.
  2. Select the export.cfg file to restore using one of the following methods:
  • To browse and select a local file, click the Choose File button.
  • To select a backup file from the network, click the UPLOAD button.

By default, mobile router setting files are saved to your Downloads folder.

  1. Click the Open button.

Your mobile router is restored with the imported file settings.

 

 

Factory Reset

You can return the mobile router to its factory settings.

Factory Reset From the NETGEAR Mobile App

To reset the mobile router and return it to its factory settings:

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Settings > Firmware.

The Firmware page displays.

  1. Tap PERFORM FACTORY RESET.
  2. Tap YES.

The mobile router resets and returns to its factory settings.

 

Factory Reset from a Web Browser

To perform a factory reset:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Administration > Factory Reset.

The Factory Reset page displays.

  1. Click the Factory Reset button.
  2. When prompted, click the Yes button to confirm.

The mobile router resets and returns to its factory settings.

 

Factory Reset Using the Reset Button

You must remove the cover on the bottom of the mobile router to access the Reset button.

To perform a factory reset using the Reset button:

  1. Make sure that the mobile router LED is lit to indicate that it is receiving power from the battery.
  2. Remove the cover on the bottom of the mobile router.
  3. Place your thumbs on the arrows on the cover and press down while sliding the cover up.
  4. Leave the battery in place.
  5. Locate the Reset button.
  6. With a sharp object such as a paperclip, press and hold the Reset button for five seconds. The mobile router returns to factory settings.
  7. 7. Replace the cover on the back of the mobile router.

 

 

Reboot the Mobile Router

You can reboot the mobile router from the NETGEAR mobile app or from a web browser.

Reboot the Mobile Router From the NETGEAR Mobile App

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Power.

The Power Options page displays.

  1. Tap REBOOT DEVICE.

The mobile router reboots.

 

Reboot the Mobile Router From a Web Browser

To reboot the mobile router:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. In the upper, right corner, click the menu icon.
  2. The menu opens.
  3. Select Reboot.
  4. When prompted, click the REBOOT button. The mobile router reboots.

 

 

Power Off the Mobile Router

You can use the Power button on the mobile router to turn it off, or you can log in to the mobile router with a browser and shut down the mobile router.

Power Off the Mobile Router Manually

Press and hold the Power button on the device for a few seconds.

 

Power Off the Mobile Router From the NETGEAR Mobile App

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down. The dashboard displays.
  4. Tap Power. The Power Options page displays.
  5. Tap POWER OFF DEVICE. The mobile router turns off.

 

Power Off the Mobile Router From a Web Browser

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. In the upper right corner of the page, click the menu icon.

The menu opens.

  1. Select Power Off.
  2. When prompted, click the SHUTDOWN button.

The mobile router powers off.

 

 

 

View Details About Your Mobile Router

You can view details about your device such as the model number, software version, and IMEI (International Mobile Equipment Identity).

View Mobile Router Details From the NETGEAR Mobile App

  1. On your smartphone, connect to the mobile router’s WiFi network.
  2. Launch the NETGEAR Mobile app.
  3. Swipe down.

The dashboard displays.

  1. Tap Settings > About.

The About page displays.

 

 

View Mobile Router Details from a Web Browser

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > About. The ‘About’ page displays.

 

Netgear Nighthawk M1 Troubleshooting

This chapter provides suggestions for troubleshooting problems that might arise when you are using your Netgear Nighthawk M1 mobile router. The chapter covers the following topics:

  • Diagnostics
  • The WiFi Network Name Is Not in the List of Networks
  • The No Signal Icon Displays
  • Cannot Log In to the Mobile Router Using a VPN
  • The Mobile Router Cannot Connect to a Computer Running Windows Vista
  • The Mobile Router Does Not Connect to the Cellular Network

 

Diagnostics of Netgear Nighthawk M1

To view diagnostics:

  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1.

A login page displays.

  1. Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

  1. Select Settings > Mobile Router Status > DIAGNOSTICS.

The Diagnostics page displays.

 

 

 

The WiFi Network Name Is Not in the List of Networks

If you do not see the Netgear Nighthawk M1 mobile router’s WiFi networks from your computer or mobile device, try these suggestions:

  • Refresh the list of networks.
  • If the LCD is dark, the WiFi radio might be asleep. Press the Power button to wake the M1 mobile router.
  • If the mobile router is tethered to your computer, make sure that WiFi is set to stay on when the mobile router is tethered. See Use the USB Type C Cable to Charge Only in How to Use Netgear Nighthawk M1 Router.

 

 

 

The No Signal Icon Displays

If the No Signal icon displays on either the LCD or the mobile router web page, make sure that you are in your network service provider’s coverage area.

Cannot Log In to the Mobile Router Using a VPN

If you are using your mobile router while connected to a VPN, you might not be able to access the mobile router web page using http://m.home.

To directly access the mobile router web page hosted on the device, enter the address http://192.168.1.1 in your browser.

 

 

 

The Mobile Router Cannot Connect to a Computer Running Windows Vista

A known issue exists whereby computers running Microsoft Windows Vista cannot obtain an IP address from certain 4G routers. More information and a fix are available at support.microsoft.com/kb/928233, or visit the Microsoft support website and search for knowledge base article 928233.

 

 

 

The Mobile Router Does Not Connect to the Cellular Network

If your Nighthawk M1 mobile router does not connect to your service provider’s mobile broadband network, try the following suggestions:

  • Make sure that your SIM account is active. To check SIM status, contact your Internet service provider.
  • If you use a prepaid SIM card, make sure that the account balance is positive.
  • If your mobile router still does not connect, you might need to create or update the default connection profile.
  1. From a computer that is connected to your network, launch a web browser.
  2. Enter http://m.home or http://192.168.1.1. A login page displays.
  3. Enter the mobile router password. The password is case-sensitive. The dashboard displays.
  4. Select Settings > Advanced Settings > Cellular. The Cellular page displays.
  5. In the APN section, review the ISP settings.
  6. To change the active APN or to change the APN settings, click the Edit icon.

For more information about changing these settings, see Specify Cellular Settings .

Netgear Aircard 815s (AT&T Unite Explore) Review

If you are a hiker or usually go to the outdoor field for activities, you must get to know AT&T Unite Explore, also named as Netgear Aircard 815s. Even though many mobile smartphones have the hotspot function, after reading this article, you will know the features, specs, network, signal advantages, battery, touch screen, the chipset of the Netgear AC815s and how you should take one for your family or group when wireless internet is necessary.

 

Rugged design for outdoor use

Netgear AC815S modem is the world’s first LTE mobile hotspot with rugged design covered in rubber bumpers, which makes it dustproof, shock and water-resistant. Like its predecessor Aircard 810s, Aircard 815s modem has a simplified 2.4inch touch screen, where users can quickly check the most important is that user can do simple settings through the touch screen like operating a smartphone. The USB 3.0 connector of Netgear Aircard 815s can make it work like a 4G USB modem when connecting with a PC. What’s more, there are two connectors for 4G external antenna, which is also important when the device is using in a rural area or even in the forest.

Large Battery can charge other devices

Another highlight feature is the large battery – Netgear had assigned a removable battery of 4340mAh, which could keep working for around 22 hours and standby time up to 576 hours. If you think this is not enough, you can keep a spare battery for exchange and charging. In this way, the Netgear AC815 could keep working all day long and you don’t need worry of power-off. In addition, aircard 815s could charge other devices based on “Jump Boost” function called by Netgear, i.e it can work like a mobile power bank, which is also very useful for other electronics.

LTE Category 9 Modem

Like the Netgear Aircard 800s, Netgear 815S also supports LTE advanced network on LTE Cat.9 with the latest Qualcomm X12 modem, which could support 3 x carrier aggregation technology with peak download speed to 450mbps. As a WiFi hotspot, Aircard 815s could support maximum 15 WiFi-enabled devices simultaneously. This quantity is enough for most cases in a group or family. The Netgear AC815S hotspot supports LTE bands 1/2/3/4/5/7/12/17/29/30 and HSPA 850/1900/2100MHz, which makes it could work well in most countries of the world.

 

802.11ac with dual band and Multiple SSID & Guest WiFi

Like the brother model Aircard 810s, Netgear AC815S would increase network performance and reduce interference with 802.11ac and Dual-Band 2.4 GHz/5 GHz WiFi. What’s more, it could support multiple SSID and guest WiFi function, which is usually available for high-level LTE mobile hotspots. In addition, the WPN (WiFi Protected Setup) feature is available.

 

Below are the features and characteristics for Netgear AC815S for reference:

 

Features and Specs of AT&T Unite Explore
Manufacturer and type Netgear AC815S
Chipset Qualcomm® Snapdragon™ X12 LTE Modem (MDM9240)
LTE category LTE Cat.9
Download rate up to 450 Mbit/s
Upload rate up to 50 Mbit/s
Supported LTE bands B1, B2, B3, B4, B5, B7, B12, B17, B29, and B30
Downwards compatible with GSM, EDGE, HSDPA, DC-HSPA+
Support 3G Bands 850/900/1900/2100MHz
Support for LTE-Advanced Yes
MIMO Support Yes, 2×2 MIMO
SIM Type Micro-SIM (3FF)
Connection for external antenna Yes, two TS-9 connectors(Buy Aircard 815S Antenna)
Network | LAN & WLAN
LAN Ports No
WLAN Standards 802.11 b/g/n/ac (dual-band 2.4 and 5 GHz)
5 GHz WLAN Support Yes
Multiple SSID/Guest WiFi Support Yes
Encryption WPS/WPA/WPA2
WLAN Hotspot Function Support maximum up to 15 users
Telephone
With integrated telephone system no
Connector for ISDN telephones no
Connection for analog telephones no
DECT no
integrator answering machine no
Others
IPv6 Dual Stack No
Battery Capacity 4340 mAh, Up to 22 hours of continuous usage
Battery Removable Yes
Battery Standby time 576 hours (typical)
Dimension 113.5 mm x 71 mm x 20 mm
Weight 178.5 g (with battery)
USB USB 3.0 compliant
Memory Card Expansion No
Release 2016
Price 349.00USD for unlocked Netgear AC815S
available at »AT&T and https://www.4gltemall.com/
File Download
Quick start guide » Download Netgear Aircard 815s specs(PDF)
Detailed manual » Download AT&T Unite Explore manual(PDF)

 

 

Conclusion

Netgear Aircard 815s is a rugged mobile 4G router based on Qualcomm X12 chipset and supports of LTE advanced network to get fast speed connection on WLAN 802.11ac dual bands. The supported frequency bands make it travel freely over the world. And large battery could keep itself working for a long time and charge other terminals. The dual connectors for the external antenna are also very useful features when a device is working at weak signal areas. All the features make aircard 815s a perfect gadget for outdoor use. Of course, as a top mobile LTE router, the Netgear AC815s price is not cheap now comparing with earlier LTE mobile hotspots. However, considering the special design, powerful function, the Aircard 815s is worth the price.

Netgear Aircard 800s (Optus 4G Wi-Fi Modem) Review

As Netgear’s first LTE category 9 mobile hotspot, Aircard 800s has improved configuration for LTE Advanced networks. Netgear Aircard 800s was already available for Australian network provider Optus and named it as Optus 4G WiFi Modem AC800S. With the support of LTE Cat.9 and 3 band carrier aggregation technology, Netgear AC800S could achieve download speed to 450mbps and upload speed to 50mbps, which is triple faster than that of LTE Cat.4 mobile hotspots. The AC800S Netgear could provide LTE Advanced connectivity, swift application response times, reliable connectivity and a better overall user experience for buffering data-heavy programs such as multimedia and video files.

User-friendly Touch Screen

Netgear AC800S modem is not only fast for wireless internet connection but also extremely user-friendly. Like its predecessor Netgear Aircard 810s, Aircard 800s modem has a simplified touch screen, where users can see the important information about the internet, such as the signal strength, network provider name, battery status, data consumed, WiFi SSID and password, WiFi connected user quantity, SMS, and settings etc.. The most important is that user can do simple settings through the touch screen like operating a smartphone. The Netgear Aircard 800s is well positioned to offer you a superior mobile broadband experience like never before.

Below are the features and characteristics for Netgear AC800S for reference:

 

Features and characteristics of Netgear Aircard 800S
Manufacturer and type Netgear AC800S
Chipset Qualcomm Cortex-A7
LTE category LTE Cat.9
Download rate up to 450 Mbit/s
Upload rate up to 50 Mbit/s
Supported LTE bands 700 (B28), 1800 (B3), 2100 (B1), 2300 (B40), 2600 (B7)
Downwards compatible with GSM, EDGE, HSDPA, DC-HSPA+
Support 3G Bands 900/2100 MHz
Support for LTE-Advanced Yes
MIMO Support Yes, 2×2 MIMO
SIM Type Micro-SIM (3FF)
Connection for external antenna Yes, two TS-9 connectors(Buy Netgear AC800S Antenna)
Network | LAN & WLAN
LAN Ports No
WLAN Standards 802.11 b/g/n/ac (dual-band 2.4 and 5 GHz)
5 GHz WLAN Support Yes
Multiple SSID/Guest WiFi Support Yes
Encryption WPS/WPA/WPA2
WLAN Hotspot Function Support maximum up to 15 users
Telephone
With integrated telephone system no
Connector for ISDN telephones no
Connection for analog telephones no
DECT no
integrator answering machine no
Others
IPv6 Dual Stack No
Battery Capacity 2930 mAh, Up to 11 hours of continuous usage
Battery Removable Yes
Battery Standby time 260 hours (typical)
Dimension 110 (L) x 68 (W) x 16.1 (H) mm
Weight 82 g (without battery), 132 g (with battery)
USB USB 3.0 compliant charging cable
Memory Card Expansion No
Release Apr 2017
Price 199.00USD for unlocked version
available at »Optus and www.4gltemall.com
File Download
Quick start guide » Download Netgear Aircard 800s spec(PDF)
Detailed manual » Download Netgear AC800s manual(PDF)

 

LTE Category 9 Modem

The Netgear 800S is designed to support LTE advanced network with LTE Category 9 and CA technology, which could support peak download speed to 450mbps. As a WiFi hotspot, Aircard 800 could support maximum 11 WiFi-enabled devices simultaneously. However, for many users, the carrier deployed networks have not reached LTE advanced. So Netgear Aircard 800s is a future-proof mobile router.

WLAN Standard 802.11ac with dual band

Netgear AC800S would increase network performance and reduce interference with 802.11ac and Dual-Band 2.4 GHz/5 GHz WiFi. What’s more, it could support multiple SSID and guest WiFi function, which is usually available for high-level LTE mobile hotspots. In addition, the WPN (WiFi Protected Setup) feature is available.

 

Other features

The Aircard 800 modem has a removable battery of 2930mAh, which could keep working for 11 hours and standby time could last for 260 hours. The battery can make Netgear 800s work like a power bank to charge other electric devices, which Netgear call it “Jump Boost” function. With the device, the Jump Boost cable is provided. Like other Netgear 4G mobile routers, Aircard 800s also has two connectors(TS-9 type) for a 4G external antenna.

 

Summary

Netgear Aircard 800s is a high-level mobile 4g router with the support of LTE advanced network to get fast speed connection on WLAN 802.11ac dual bands. The large battery could keep itself working for a long time and charge other terminals. The dual connectors for the external antenna are also very useful features for the people located at weak signal areas. The Netgear AC800s price is not expensive comparing with same level LTE-A mobile hotspots. If you want to buy an LTE-A mobile hotspot with good price, the Netgear AC800S is a good one to consider.

 

To buy Netgear Aircard 800s (unlocked), click here: https://www.4gltemall.com/netgear-aircard-800s-lte-cat-9-mobile-hotspot.html

Five LTE Cat.6 Portable 4G Routers to Recommend

With the development of LTE network and technology, many users are not satisfied with the wireless speed. They want faster speed. So the support of LTE advanced network is necessary to get higher LTE speed. The good news is that many network providers already upgraded their network to LTE advanced or advanced Pro with carrier aggregation and MIMO technologies. To fulfill higher speed on LTE-A networks, many network manufacturers were already presenting their mobile 4G routers to meet the requirements. Below are the recommended LTE Cat. 6 portable 4G router from famous equipments supplier:

  1. Netgear Aircard 790s

Netgear Aircard 790s is the world’s first LTE cat.6 mobile router and it’s the first mobile 4G router with touchscreen. Below are the highlight features of Aircard 790s:

* Manufacturer: Netgear Wireless

* Support LTE frequency band 1/3/7/8/28 (700/900/1800/2100/2600 MHz)

* Chipset: Qualcomm – MDM9230 (Modem) – WTR3925 (RF) – QCA6174 (Wi-Fi)

* Connect up to 15 WiFi enabled devices on the go

* Supports Cat 6 LTE with carrier aggregation (up to 40 MHz)

* Capable of download speeds of up to 300mbps

* Future proof for the premium 700 MHz spectrum

* Removable lithium-ion (2930 mAh), Last up to 11 hours of active use

* Wi-Fi 802.11 ac/b/g/n, 2×2 MIMO, Dual-Band 2.4GH/5GHz

* 2.4” QVGA capacitive LCD touchscreen

* SIM Type: 3FF Format (microSIM)

* Two external antenna connectors (TS-9 type)

 

Check more details about Netgear Aircard 790s: https://www.4gltemall.com/netgear-aircard-790s-4g-mobile-hotspot.html

 

  1. Huawei E5786

* Manufacturer: Huawei

* Three variant models: E5786s-32a, E5786s-62a, E5786s-63a

* Support LTE frequency band 1/3/5/7/8/20/38 (E5786s-32a), band 1/3/8/28(E5786s-62a), band 1/3/7/8/28/40 (E5786s-63a)

* Chipset: HiSilicon LTE Cat6 chipset

* Connect up to 10 WiFi enabled devices simultaneously

* Supports Cat 6 LTE with carrier aggregation

* LTE download speeds of up to 300mbps, upload speed to 50mbps

* Non-removable lithium-ion (3000 mAh), maximum up to 10hours working time

* Wi-Fi 802.11 ac/b/g/n, 2×2 MIMO, Dual-Band 2.4GH/5GHz

* 2.4” QVGA capacitive LCD touchscreen

* SIM Type: 3FF Format (microSIM)

* Two external antenna connectors (TS-9 type)

Check more details about Huawei E5786:

https://www.4gltemall.com/huawei-e5786-4g-lte-cat6-mobile-wifi.html

 

  1. ZTE UFi MF970

ZTE MF970 Screen

* Manufacturer: ZTE

* Support LTE frequency band B1/2/3/4/7/8/20/28/12&17

* Chipset: Qualcomm – MDM9230 (Modem)

* Connect up to 14 WiFi enabled devices simultaneously

* Supports Cat 6 LTE with carrier aggregation

* Capable of download speeds of up to 300mbps

* Future proof for the premium 700 MHz spectrum

* Non-removable lithium-ion (2300 mAh), Last up to 8 hours of active use

* Wi-Fi 802.11 ac/b/g/n, 2×2 MIMO, Dual-Band 2.4GH/5GHz

* 1.44” TFT screen

* SIM Type: 3FF Format (microSIM)

* Two external antenna connectors (TS-9 type)

 

Check more details about ZTE MF970 UFi:

https://www.4gltemall.com/zte-ufi-mf970-lte-cat6-mobile-wifi-hotspot.html

 

  1. Alcatel Link Y900

* Manufacturer: Alcatel One Touch

* Support LTE frequency band B1/3/7/8/20

* Chipset: Qualcomm – MDM9230 (Modem)

* Connect up to 32 WiFi enabled devices simultaneously

* Supports Cat 6 LTE with carrier aggregation

* LTE downlink speeds of up to 300mbps, uplink to 50mbps

* Removable lithium-ion (3600 mAh or 1800mAh), last up to 8 hours of active use or more

* Wi-Fi 802.11 ac/b/g/n, 2×2 MIMO, Dual-Band 2.4GH/5GHz

* 1.44” TFT screen

* SIM Type: 3FF Format (microSIM)

* No external antenna connector

 

Check more details about Alcatel Link Y900:

https://www.4gltemall.com/alcatel-link-y900-4g-led-mobile-hotspot.html

 

  1. Huawei E5885

HUAWEI E5885Ls-93a Mobile WiFi Pro 2 front

* Manufacturer: Huawei

* Support LTE frequency band B1/B2/B3/B4/B5/B7/B8/B20/B19/B38/B40/B41

* Chipset: HiSilicon LTE Cat6 chipset

* Connect up to 32 WiFi enabled devices simultaneously

* Supports Cat 6 LTE with carrier aggregation

* With one Ethernet Port for LAN (RJ45)

* LTE download speeds of up to 300mbps, upload speed to 50mbps

* Non-removable lithium-ion Large battery (6400mAh), maximum up to 20hours working time

* Wi-Fi 802.11 ac/b/g/n, 2×2 MIMO, Dual-Band 2.4GH/5GHz

* 0.96 inch OLED display

* SIM Type: 3FF Format (microSIM)

* No external antenna connector

Check more details about Huawei E5885(Portable 4G router with Ethernet port and Sim card slot & large battery):

https://www.4gltemall.com/huawei-mobile-wifi-pro-2.html

From the specs of the mobile 4G routers, we can see each one has its own specialty. Huawei E5885 seems to be the most powerful with Ethernet port and large battery for mobile use. It’s the latest one available since 2017 but price is still at high range. Other models may not be the latest, but the price is budget. If you are looking for a portable 4G router with support of LTE Category 6 and CA, the above mobile 4g routers are recommended.

Four High Gain 4G Outdoor LTE Antennas to Recommend

More and more 4G LTE Routers and 4G USB modems are available in the market; many users would expect faster speed on 4G networks than that from 3G networks. However, due to far from the cell tower deployed by the network providers, the 4G/LTE signal coverage is very weak. Before the network providers do something to change the situation, users can connect an external 4G antenna to the wireless device to improve the signal so as to speed up the data transmission. And it’s better to use a high gain outdoor antenna rather than indoor 4G antenna.

 

To select a 4G external antenna, you need check how many antenna connectors there is on your device and the connector type. For example, if you are using Huawei E5186 4G LTE Router, open the cover on the back, you will find the connector for external 4G antenna. The connector type is SMA-female. In the 4G data transmission, two connectors are for the application MIMO technology. So you’d better choose an LTE Antenna with two connectors. To connect to the SMA-female, the right connector at the cable end of the antenna is SMA-male.

 

One more thing to consider is how long the distance between the router and the location where to install the antenna. The distance determines the length of the antenna extend cable. For example, if your Huawei E5186 router is near the window and you will install the outdoor LTE antenna just outside the window less than 10 meters. So you can select the extend cable of 10 meters. Somebody may suppose the longer the cable, the better to use. However, consider the longer of the cable, the gain would lose more. So the antenna cable is better in short. If your device is far from the installation point, you’d better select to use high-quality material in the cable so as to reduce the gain loss.

 

The good news is that the extend cable for the outdoor LTE antenna could be customized on www.4gltemall.com. So you don’t need worry about the cable. Below are recommended Outdoor LTE External antenna to use with 4G LTE Gadgets:

 

  1. 4G High Gain 24dBi LTE Panel Flat Outdoor Antenna(With Two connectors)

Technical Specifications:

 

* Frequency Range: 698-806MHZ/824-894mhz/ 925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ

* Gain: 24dbi

* Polarization Type: Vertical

* Radiation: Omni directional

* VSWR:≤1.5

* Impedance: 50Ω

* Max Power: 50w

* Connector Type: customization (The extend cable can be with SMA, TS-9, CRC or other connectors.)

* Cable Type: RG58 (best) 100% cooper

* Cable Length: for customization

* Dimensions: 9.85x 18.5x 1.2inches

* Weight: 2.58 Pound

 

See compatible 4G LTE devices and buy this high gain antenna here: https://www.4gltemall.com/4g-high-gain-lte-panel-flat-outdoor-antenna.html

 

 

  1. 18dBi High Gain Flat Panel 4G Outdoor Antenna(With Two connectors)

 

Technical Specifications:

 

* Frequency Range: 698-806MHZ/824-894mhz/ 925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ

* Gain: 18dbi

* Polarization Type:Vertical

* Radiation: Omni

* VSWR: ≤1.5

* Impedance: 50Ω

* Max Power: 50w

* Connector Type: options (SMA, TS-9, CRC-9 connectors)

* Cable Type: RG58(best)100% cooper

* Cable Length: customization

* Color: White(default), Black

* Dimensions: 8.27x 8.27x 1 inches

* Weight: 1.32 Pound

 

See compatible 4G LTE devices and buy this high gain antenna here: https://www.4gltemall.com/high-gain-flat-panel-4g-outdoor-antenna.html

 

  1. 28dBi High Gain 4G Outdoor Yagi Directional Antenna(With only one connector)

28dBi High Gain 4G Outdoor Yagi Directional Antenna

Technical Specifications:

 

* Frequency Range: 698-806MHZ/824-894mhz/ 925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ

* VSWR: ≤ 2.5

* Gain: 28dBi

* Polarization Type: Vertical

* Radiation: Directional

* Input Power: 50W

* Input Impedance: 50 Ohms

* Connector Type: SMA/TS-9/CRC-9

* Connector Quantity: one

* Cable Type: RG58 (best) 100% cooper

* Cable Length: 1.5m (more options for extend cable available.)

* Dimensions: 22.8x 2.7 x 0.8inches

* Weight: 0.42 Pound

 

See compatible 4G LTE devices and buy this high gain antenna here:

https://www.4gltemall.com/28dbi-high-gain-4g-outdoor-yagi-directional-antenna.html

 

 

  1. 15dBi 4G LPDA LTE Outdoor Antenna(With only one connector)

Technical specifications:

* Antenna type: LPDA

* Frequency Range (MHz): 698-960/1710-2700 MHz

* Bandwidth: 262/990 MHz

* Gain: 15 dBi

* beam width: H：90°/70° V：60°/55°

* VSWR: ≤1.5

* Input Impedance: 50Ω

* Polarization: Vertical or Horizontal

* Front to Back Ratio: 18dB

* Max, power: 50W

* Connector Qty: 1

* Connector Type on Antenna: SMA-Male/TS-9/CRC-9

* Cable: 10 meters/15 meters/20 meters (RG58)

* Radome material: protected ABS

* Lightning Protection: DC ground

* Working Temperature: -40～60℃

* Rated Wind Velocity: 60m/s

* Color: white

* Mounting way: hold in the pole

* Pole diameter: ￠35-50

* Dimension (mm): 410*215*65mm

* Antenna weight: 750g

* Package content:

– 1 x LPDA Antenna

– Extend cable

– Accessories to mount the antenna

 

See compatible 4G LTE devices and buy this high gain antenna here:

https://www.4gltemall.com/wide-band-log-periodic-yagi-lte-outdoor-antenna.html