Four High Gain 4G Outdoor LTE Antennas to Recommend

More and more 4G LTE Routers and 4G USB modems are available in the market; many users would expect faster speed on 4G networks than that from 3G networks. However, due to far from the cell tower deployed by the network providers, the 4G/LTE signal coverage is very weak. Before the network providers do something to change the situation, users can connect an external 4G antenna to the wireless device to improve the signal so as to speed up the data transmission. And it’s better to use a high gain outdoor antenna rather than indoor 4G antenna.

 

To select a 4G external antenna, you need check how many antenna connectors there is on your device and the connector type. For example, if you are using Huawei E5186 4G LTE Router, open the cover on the back, you will find the connector for external 4G antenna. The connector type is SMA-female. In the 4G data transmission, two connectors are for the application MIMO technology. So you’d better choose an LTE Antenna with two connectors. To connect to the SMA-female, the right connector at the cable end of the antenna is SMA-male.

 

One more thing to consider is how long the distance between the router and the location where to install the antenna. The distance determines the length of the antenna extend cable. For example, if your Huawei E5186 router is near the window and you will install the outdoor LTE antenna just outside the window less than 10 meters. So you can select the extend cable of 10 meters. Somebody may suppose the longer the cable, the better to use. However, consider the longer of the cable, the gain would lose more. So the antenna cable is better in short. If your device is far from the installation point, you’d better select to use high-quality material in the cable so as to reduce the gain loss.

 

The good news is that the extend cable for the outdoor LTE antenna could be customized on www.4gltemall.com. So you don’t need worry about the cable. Below are recommended Outdoor LTE External antenna to use with 4G LTE Gadgets:

 

  1. 4G High Gain 24dBi LTE Panel Flat Outdoor Antenna(With Two connectors)

Technical Specifications:

 

* Frequency Range: 698-806MHZ/824-894mhz/ 925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ

* Gain: 24dbi

* Polarization Type: Vertical

* Radiation: Omni directional

* VSWR:≤1.5

* Impedance: 50Ω

* Max Power: 50w

* Connector Type: customization (The extend cable can be with SMA, TS-9, CRC or other connectors.)

* Cable Type: RG58 (best) 100% cooper

* Cable Length: for customization

* Dimensions: 9.85x 18.5x 1.2inches

* Weight: 2.58 Pound

 

See compatible 4G LTE devices and buy this high gain antenna here: https://www.4gltemall.com/4g-high-gain-lte-panel-flat-outdoor-antenna.html

 

 

  1. 18dBi High Gain Flat Panel 4G Outdoor Antenna(With Two connectors)

 

Technical Specifications:

 

* Frequency Range: 698-806MHZ/824-894mhz/ 925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ

* Gain: 18dbi

* Polarization Type:Vertical

* Radiation: Omni

* VSWR: ≤1.5

* Impedance: 50Ω

* Max Power: 50w

* Connector Type: options (SMA, TS-9, CRC-9 connectors)

* Cable Type: RG58(best)100% cooper

* Cable Length: customization

* Color: White(default), Black

* Dimensions: 8.27x 8.27x 1 inches

* Weight: 1.32 Pound

 

See compatible 4G LTE devices and buy this high gain antenna here: https://www.4gltemall.com/high-gain-flat-panel-4g-outdoor-antenna.html

 

  1. 28dBi High Gain 4G Outdoor Yagi Directional Antenna(With only one connector)

28dBi High Gain 4G Outdoor Yagi Directional Antenna

Technical Specifications:

 

* Frequency Range: 698-806MHZ/824-894mhz/ 925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ

* VSWR: ≤ 2.5

* Gain: 28dBi

* Polarization Type: Vertical

* Radiation: Directional

* Input Power: 50W

* Input Impedance: 50 Ohms

* Connector Type: SMA/TS-9/CRC-9

* Connector Quantity: one

* Cable Type: RG58 (best) 100% cooper

* Cable Length: 1.5m (more options for extend cable available.)

* Dimensions: 22.8x 2.7 x 0.8inches

* Weight: 0.42 Pound

 

See compatible 4G LTE devices and buy this high gain antenna here:

https://www.4gltemall.com/28dbi-high-gain-4g-outdoor-yagi-directional-antenna.html

 

 

  1. 15dBi 4G LPDA LTE Outdoor Antenna(With only one connector)

Technical specifications:

* Antenna type: LPDA

* Frequency Range (MHz): 698-960/1710-2700 MHz

* Bandwidth: 262/990 MHz

* Gain: 15 dBi

* beam width: H:90°/70° V:60°/55°

* VSWR: ≤1.5

* Input Impedance: 50Ω

* Polarization: Vertical or Horizontal

* Front to Back Ratio: 18dB

* Max, power: 50W

* Connector Qty: 1

* Connector Type on Antenna: SMA-Male/TS-9/CRC-9

* Cable: 10 meters/15 meters/20 meters (RG58)

* Radome material: protected ABS

* Lightning Protection: DC ground

* Working Temperature: -40~60℃

* Rated Wind Velocity: 60m/s

* Color: white

* Mounting way: hold in the pole

* Pole diameter: ¢35-50

* Dimension (mm): 410*215*65mm

* Antenna weight: 750g

* Package content:

– 1 x LPDA Antenna

– Extend cable

– Accessories to mount the antenna

 

See compatible 4G LTE devices and buy this high gain antenna here:

https://www.4gltemall.com/wide-band-log-periodic-yagi-lte-outdoor-antenna.html

 

Five 4G/LTE Outdoor Antennas to Recommend

Since more and more LTE broadbands are used with the wireless network upgrade, many people complain that they had weak signal at their location, so their 4G routers, 4G USB dongles or 4G mobile hotspots can’t show the best performance, i.e. they can’t provide the fastest possible speed for surfing. As the top professional supplier of the 4G mobile braodbands, we 4GLTEMAll.com concered on what our customers concern. To solve this problem, it’s better to let the network carrier to deploy the cell tower so as to get better network coverage. However, in most cases, the carrier would not do as you wish. Then you’d better to take an external LTE antenna to improve the signal. Today, we would like to recommend five 4G LTE outdoor antennas. You can choose one suitable 4G outdoor antenna for your 4G LTE devices at home or in office.

 

Firstly, you should check the quantity of the connectors in your device. In most case, the 4G devices such as LTE Router/gateways, LTE Dongles would have two connectors. But there are also many devices including 3G wireless devices with only one connector. Actually, the recommended 4G LTE antenna can also work on 3G, use can also take the 4G outdoor antenna to work with 3G devices.

 

Recommend One: 9dBi Flat Panel LTE Outdoor Antenna (One connector)

4G Outdoor LTE Antenna 9dBi High Gain Panel Flat

Specifications:

* Frequency Range: 698-806MHZ/824-894mhz/925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ

* VSWR: ≤1.8:1max

* Gain: 9dBi

* Polarization Type: Vertical

* Radiation: Omni

* Rated Power: 50W

* Input Impedance: 50 Ohms

* Connector Type: N female or customize (SMA-male, TS-9, CRC-9 connectors)

* Cable Type: RG58(best)100% cooper

* Cable Length: customization

* Color: White

* Dimensions: 7 x 8.19 x 1.7inches

* Weight: 0.881 Pound

You may worry the connector is not usable with your device, we can supply the extend cable with the required connectors(SMA, TS-9 or CRC-9). If you like this antenna, click here: http://www.4gltemall.com/4g-high-gain-outdoor-flat-panel-lte-antenna.html

 

Recommend Two: 28dBi Yagi High Gain 4G Ourdoor Antenna (One connector)

28dBi High Gain 4G Outdoor Yagi Directional Antenna

 

Technical Specifications:

* Frequency Range:698-806MHZ/824-894mhz/ 925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ

* VSWR:≤ 2.5

* Gain: 28dBi

* Polarization Type:Vertical

* Radiation: Directional

* Input Power: 50W

* Input Impedance: 50 Ohms

* Connector Type: SMA/TS-9/CRC-9

* Connector Quantity: one

* Cable Type: RG58(best)100% cooper

* Cable Length: 1.5m (If you want the cable to be longer, you can choose the extend cable.)

* Dimensions: 22.8x 2.7 x 0.8inches

* Weight: 0.42 Pound

The connector with the antenna could be SMA, TS-9 or CRC-9. If you need other connector, you can contact us to customize. If you like this antenna, you can click here to buy it:

http://www.4gltemall.com/28dbi-high-gain-4g-outdoor-yagi-directional-antenna.html

 

 

Recommend Three: 18dBi Flat Panel 4G LTE Outdoor Antenna (Two Connectors)

18 dBi High Gain Panel Flat 4G Outdoor LTE Antenna for 4G Router/Dongle/Mobile Hotspot

Technical Specifications:
* Frequency Range: 698-806MHz/824-894MHz/ 925-960MHz/1710-1885MHz/1920-1980MHz/2110-2170MHz/2500-2690MHz

* Gain: 18dbi

* Polarization Type: Vertical

* Radiation: Omni

* VSWR: ≤1.5

* Impedance: 50Ω

* Max Power: 50w

* Connector Type: options (SMA, TS-9, CRC-9 connectors)

* Cable Type: RG58 (best)100% cooper

* Cable Length: customization

* Color: White (default), Black

* Dimensions: 8.27x 8.27x 1 inches

* Weight: 1.32 Pound

There is no extend cable with the antenna, use need buy extend cable with the suitable connectors to connect the antenna with the equipments. If there is no suitable connector for your device, you can contact us to customize it. Buy the outdoor antenna here: http://www.4gltemall.com/high-gain-flat-panel-4g-outdoor-antenna.html

 

 

Recommend Four: 24dBi Flat Panel High Gain LTE Outdoor Antenna (Two Connectors)

4G High Gain LTE Panel Flat Outdoor Antenna

 

Technical Specifications:

* Frequency Range: 698-806MHZ/824-894mhz/ 925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ

* Gain: 24dbi

* Polarization Type: Vertical

* Radiation: Omni

* VSWR:≤1.5

* Impedance: 50Ω

* Max Power: 50w

* Connector Type: customization (The extend cable can be with SMA, TS-9, CRC or other connectors.)

* Cable Type: RG58 (best)100% cooper

* Cable Length: for customization

* Dimensions: 9.85x 18.5x 1.2inches

* Weight: 2.58 Pound

This outdoor is the largest antenna in the five recommend outdoor antenna and has the best performance to strengthen the wireless network signal. If you like this antenna, click here to buy it: http://www.4gltemall.com/4g-high-gain-lte-panel-flat-outdoor-antenna.html

 

 

Recommend Five: 9dBi Flat Panel 4G LTE Outdoor Antenna (Two Connectors)

 4G LTE Outdoor Antenna (2 x CRC-9 Connectors) for Huawei 4G LTE Modems/Dongles/Aircards

 

Technical Specifications

1.Frequency:1800-2600mhz
2.VSWR:<=1.5
3.Gain: 9dBi
4.Polarization Type: Vertical
5.Rated Power: 50W
6.Input Impedance: 50 Ohms nominal
7.Size: 23.8*23*5cm
8.vertical base size
9.Cable Type: RG58(best)100% cooper
10.Cable Length: 5M * 2
11.Connector Type: 2 * CRC9 Male
12.Installation:Hanging
13.Weight of Antenna: 990g

 

There are two extend cable with this antenna. The cable length is 5 meters. If you need the extend cable, you need buy it independently. Since there are three kind connectors (SMA, TS-9, CRC-9), you can buy the antenna with three kinds connectors:

 

Two SMA connectors:

http://www.4gltemall.com/4g-lte-outdoor-antenna-2-x-sma-connectors.html

 

Two CRC-9 Connectors: http://www.4gltemall.com/4g-lte-outdoor-antenna-2-x-crc-9-connectors.html

 

Two TS-9 Connectors:

http://www.4gltemall.com/4g-lte-outdoor-antenna-2-x-ts-9-connectors.html