Specifications Archives – Page 18 of 24

TP-Link M7650 4G LTE Mobile Hotspot Review

The Chinese network specialist TP-Link was present at CeBIT 2017 and presented its new, mobile LTE router M7650. Purely optical, the model looks similar to the little brother TP-Link M7310, but inside is much more powerful hardware. With LTE Cat11 technology, the new TP-Link M7650 can handle a bandwidth of up to 600 Mbit/s in the download. Another highlight is that the M7650 provide networking with up to 32 devices via the WLAN network.

Features and characteristics of TP-link M7650
Manufacturer and type:	TP Link M7650
Chipset:	Qualcomm
LTE category:	Cat. 11
Download rate up to:	600 Mbit/s
Upload rate up to:	50 Mbps
Supported LTE bands:	B1,3,7,8,20 (800/900/1800/2100/2600MHz)
Downwards compatible with:	HSPA+ (42.2 Mbit/s), UMTS, Edge, GPRS, GSM
Support for LTE-Advanced:	Yes
MIMO Support:	No
Connection for external antenna:	No
Network \| LAN & WLAN
LAN Ports:	no
WLAN Standards:	802.11 a/b/g/n/ac
5 GHz WLAN Support:	Yes
Encryption:	WEP / WPA / WPA2
WLAN Hotspot Function:	Yes
Others
Battery pack:	3.000 mAh
Dimension:	112.5 x 66.5 x 16mm
USB:	No
Memory Card Expansion:	Yes
Release:	2017
Price:	469.00USD
available at:	www.4gltemall.com

TP-Link M7650 – Powerful Mobile Hotspot

The new portable 4G router looks smart. In order to meet the ever-increasing maximum bandwidths in the LTE networks, a modem has been installed, which the Internet speed could achieve at up to 600 Mbps ( Cat. 11 ) via LTE accesses. The upload is, however, with a maximum of 50 Mbit/s. At the moment (at the end of March 2017) the manufacturer didn’t release detail specifications of this new model. Therefore, we cannot known all the technical specifications, such as the dimension and weight. However, TP-Link confirmed, among other things.

The first thing, the M7650 could reach download speed up 600 Mbit/s. The WiFi module of the M7650 makes a good job here, as up to 867 Mbit/s are implemented via a 5 gigahertz frequency. Devices that do not support WLAN at 5 GHz can get network with 2.4 GHz. With this spectrum, up to 300 Mbit/s can still be implemented in the download. This mobile LTE router should not be blamed for the battery life. According to the manufacturer, with 3,000 mAh rechargeable battery, a maximum of 15 hours of continuous operation is possible. A mobile device can not only be connected with the M7650 via hotspot, but also configure the router.

The Chinese corporation TP-link does not show a new design for M7650 so that it can be special out of the mobile gadgets; it just follows the appearance of the M7310. There is a color mixture of silver and black and an informative TFT display. All information relevant to the operation is displayed on the latter, including the LTE signal strength, the battery status, the current speed or the network operator identification, everything is clear. The display measures 1.44 inches in the diagonal, it can be operated via physical buttons. It’s a pity that TP-Link M7650 does not have a touch screen while the similar model Netgear Aircard 810s already provides touch screen for users. What’s more, the integrated memory card slot accommodates microSD cards with a size of up to 32 GB.

Here now, the TP-link M7650 is not yet available on the market. There is another model Netgear Aircard 810s which has similar specifications and it’s already available on the market. If you prefer TP-link M7650, 4G Mobile Broadband Mall (www.4gltemall.com) accept pre-order of this future-proof 4G mobile hotspot. Once we get this TP-link M7650, we would take test and show our report soon.

Netgear Aircard 810s Hotspot Overview

Netgear AC810: a complete hotspot

Aircard 810s is a 4G mobile hotspot that works with the SIM card from a mobile operator in micro-SIM format. Compatible with category 11 for the 4G LTE, it allows download speeds up to 600 Mbps. We also note the presence of a Dual Band mode in order to benefit from better speeds. It is also compatible with 4G LTE and 3G networks throughout Europe, Middle East, Africa and Asia, as well as with 3G networks around the world. This is what you must need if you are traveling.

The case of Netgear aircard 810s is really small, yet sturdy and can be stored easily in a bag or even in a pocket.

Accessories supplied with the AC810s

Obviously, we have a removable battery that allows you to get up to 11 hours of operation and 250 hours of standby time. A USB3 cable allows recharging to USB and a USB power adapter is provided.

A cable for the Jump Boost technology allows you to charge Smartphone if it has a micro USB jack, from the battery of the AC810.

Multiple Connections

Your devices can connect to Aircard 810s thanks to the very simple creation of an 802.11 ac Wi-Fi network. By default, it already has a network name and a password, all indicated under the battery but you can simply change these parameters via the embedded menu.

Automatic management of the SIM card

If you insert a SIM card that also includes calls, SMS and MMS and not just the data as in our tests, you will be able to see SMS directly on the AC 810 via the Messages menu. We have used two SIM cards from Vodafone and Orange. The PIN code of the SIM card must be entered so that the hotspot automatically retrieves the operator parameters.

Touch screen for the AC810 hotspot

The quality of the screen is correct but do not expect the retina. Here it makes settings simple and effective. It will be noted that this one is tactile and it can managed also on a smartphone in different menus. The return and home buttons are also tactile. This is a 2.4 inch color LCD.

This screen also allows you to view the connection quality and the connection type as well as the data consumed and the number of days remaining for this quota. It’s very useful.

We tested the hotspot with an iPhone , iPad and MacBook Pro connected at the same time and did not encounter any problems. Indeed, the AC810 is capable of accommodating up to 11 devices at the same time.

Autonomy of the AC810

On the autonomy side, 100% load, we can get duration up to 11 hours but in our first tests, soliciting the flow, the autonomy was not high. In the case of a more conventional use without a systematic flow test, this autonomy should indeed be approached.

Plus, a cable is provided, allowing you to charge your Smartphone if it does not have much autonomy. This is the Jump Boost technology. Thus, we will be able to transfer power to the smartphone. Unfortunately for the owners of iPhone and iPad, it is a micro USB and non lightning connectivity.

Features of the AC810 Hotspot

We note that the menu offers access to the operator settings and that it is possible to activate a 5 Ghz Wifi mode, making it possible to obtain better transfer rates, essential with 4G at high speed. Of course, your hardware must be compatible with this Wi-Fi standard in order to get the most out of it. It is actually Wi-Fi N.

Here are the full features:

Network Technology

4G LTE, category 11 with 3-band carrier aggregation
DC-HSPA+, HSPA +, HSPA
4G LTE
3G

Supported Network Bands

4G LTE FDD 1/3/7/8/28 (700/900/1800/2100/2600 MHz)
4G LTE TDD (available for some carriers)
3G 850/900/1900/2100 MHz

Wireless

802.11ac/b/g/n
Wifi Dual Band 2.4 or 5 GHz

Required configuration

Wifi compatible device 802.11ac/b/g/n 2.4 or 5 GHz
Windows XP (SP3, 32/64 bit Media Center Edition), or Mac OSX 7.0 or later (Windows Vista, 32, 64, 64, 64 and 64 bits)

Physical characteristics

Dimensions: 112 x 69 x 15.5 mm
Weight: 132 g
Type of SIM card: micro SIM (3FF)
Operating autonomy: up to 11 hours
Standby time: up to 260 hours
Display: 2.4 “touch screen
Two connectors for external LTE Antenna(Buy Netgear Aircard 810s Antenna)

Content

Mobile Hotspot AirCard 810 (AC810)
Removable lithium-ion battery (2,930 mAh)
Cable Jump Boost
Wall charger
USB cable with Micro USB connector
Quick Start Guide

We will soon propose a test in mobile use with measurements of flows carried out in several situations. If you want to know more about Netgear aircard 4G, welcome to check here: http://www.4gltemall.com/4g-wireless-router/netgear-4g-lte-router.html

ZTE MF287 3neo LTE Cat6 Router Review

If you are looking for the latest new 4G Router with special design and supporting LTE-advanced network, you’d better have a check the ZTE MF287 4G Router which looks not like a common router. The MF287 router was presented by ZTE at CES 2016, and now it’s introduced to the carrier “3” in Austria and named “3neo”.

The 3neo design is hard to describe, below is the image in white color. In the middle, there is a line of blue color, which should be the indicator for power and network. At the bottom side, the Drei logo is listed.
ZTE MF287 3neo (4)
Strong and reliable router
With the modern design, you may curious about the technical specifications of the 3neo ZTE MF287. The 3neo LTE Router could support 4G LTE advanced Category 6 and achieve up to 300 Mbit/s for downlink and 50 Mbit/s for uplink. It is also equipped with 2.4 GHz and 5 GHz dual band WLAN and connects a total of up to 64 devices simultaneously to the Internet. 4 Gigabit LAN connections are also available.

Modern design

An LTE router now has to convince on all levels. These include ease-of-use, powerful and reliable performance, a modern mobile and wireless standard, and, of course, a cool design. Today, the ZTE MF287 3neo router can do these best. The 3neo router has to fit into every room with other furniture; the appearance of the 3neo was designed not as usual but the white color makes it looks not too special and just like one furniture.

ZTE MF287 3neo (1)

Battery on board

The 3neo has a built-in battery that performs well in the event of a power failure or on the go. When delivered, the battery can be activated online at any time on the configuration page. If no data transmission with other devices, the 3neo automatically switches to energy-saving standby. If you still need WLAN, the LTE router is ready for use again at the push of a button. Depending on the usage, the battery power is sufficient for up to 4 hours.

Plug & Play with QR code

In order to install your 3neo, you do not have to have any technical knowledge. Even SIM card and battery are already preinstalled. The principle of the 3neo is as simple as saving time, namely “PnP(Plug and Play)”. This is especially convenient with the 3Home app. User simply scans the QR code of your 3neo and you will be connected to the WLAN without complicated password input.

3Home App & Online Settings

The operation of 3neo is very easy, user can download the 3Home app to the smartphone or tablet and then can remote control the LTE router. They are free for Android and iOS, so you can do the installation, the operation and various settings in the app. Further settings could also be done via web configuration page as usual.

Guest access and WLAN timer
With Sleep Mode, you determine the time when WLAN and Internet connection are generally deactivated. You can set up a WLAN-free nighttime or keep the interactions of your children with the Sleep Mode under the handle. Another feature: The WLAN access for friends or relatives can be managed by QR code via the 3Home app. The additional entry of guest passwords will thus become invalid.

With the 3neo LTE Router, the streaming of films, the playing of online games, the supply of all family members with lightning fast Internet could be fulfilled. Below are the features and technical specifications of ZTE MF287/3neo for your reference.

ZTE MF287 Technical Specifications
Top features
Category	LTE Category 6
Download speed	Up to 300 Mbit/sec.
Upload speed	Up to 50Mbit/sec.
Power supply	Socket (AC adapter 12V / 1.5A – cable included in the package)
Internet connection	WLAN + 4 x LAN
Number of connections	Up to 64 devices
General information
Battery	3080 mAh
Dimensions	220 x 110 x 106 mm (including socket 18mm)
Weight	730g with battery
WIRELESS INTERNET ACCESS
802.11a/b/g/n/ac	Yes
Dual-band:	Yes
Connections
RJ11	Yes
RJ45	Yes
USB (number of connections)	Yes – 1x (only for manufacturer diagnosis)
Sim Type	Standard SIM Card
Tech features
External antenna	Yes
Bridge Mode	No
DMZ	Yes
SSID	Yes
Guest SSID	Yes
Port Forwarding	Yes
Watchdog Service	Yes
DHCP Settings	Yes
Network selection	Yes
APN Settings	Yes

Huawei B310 4G LTE Router Review

Every year, Huawei would present some new 4G Router to meet the market demand. Now we have the new 4G router B310 and we will have a review about this new router in the article.

With the Huawei B310 Router, you can share your data plan using Wi-Fi or Ethernet. And it has other functions which are very useful for many people, we will introduce the features in this review.

Technical Specifications of Huawei B310

Manufacturer and model	Huawei B310s-22 (There are other variant models)
3G Network Bands	850/900/1900/2100
Bands / Category 4G LTE	B1, B3, B7, B8, B20, LTE Cat 4 DL 150/UL 50 Mbps
Connectivity	Wi-Fi IEEE 802.11b/g/n with a range of 200 meters LAN IEEE 802.3 / 802.3u
Ports	Ethernet port, telephone port, two connectors for external 4G antennas of 1dBi each (included) and DC connector.

Design

Here we can find the LTE CPE B310 that has a very simple design, so it is pleasant to use with the furniture at home, and it occupies very little space. The equipment material is totally plastic like any other router or similar devices such as Huawei B593 and Huawei B890 Router.

HUAWEI B310 4G Router wifi (1)

On its front, we find four illuminated icons that indicate the status of the router. The first one (from left to right) indicates that the B310 router is power on, the second shows the status of the connected network (3G, 4G … etc) using colors, the third indicates the status of the Wi-Fi network, the forth indicates the status of the Ethernet connector and finally we have the operator’s signal bars.

At the top we find the power and WPS buttons, the latter is to allow compatible devices to connect to the Wi-Fi network without entering the password.

At the back we will find the two external antennas, below we will see the current connector, the Ethernet port and a telephone line connector. We also see a cover, which when removed will allow us to insert our SIM card (mini SIM format) at the side.

HUAWEI B310 4G Router wifi (5)

Ethernet / LAN / WAN

The main function you will find on this router is precisely the ability to share your 4G, 3G or 2G data connection via Ethernet or WiFi with many connected users. The WiFi range could cover around 200 meters. The connection is super easy, just connect the modem of your internet provider via Ethernet cable to the Huawei B310 and configure it according to the type of connection that your provider uses.

As an additional feature, the router will also offer you the possibility of cloning a MAC address, if necessary.

WiFi

Per my personal experience, I usually have to use Wi-Fi extenders at my home, but with the Huawei B310 Router, it was unnecessary to have the extender, so the WiFi coverage from B310 CPE is really trustful. Also, the speed I had turned out to be very good and with a low ping when connecting.

In terms of configurations, the B310 router is capable of broadcasting up to 4 Wi-Fi networks and each can adjust the frequency channel manually, having channels 1 through 11.

HUAWEI B310 4G Router wifi (3)

As for security, you can decide whether to leave the name of your Wi-Fi network visible or not, in addition to being able to select a WEP, WPA2-PSK or WPA/WPA2-PSK password. If you want even more security, you can filter up to 10 quotas using the MAC address of each device.

Security

The Huawei B310 router turned out to be pretty perfect, in fact I thought it was something simpler, but I was very wrong. Here we can configure a firewall, filter by MAC and IP address, even virtual servers to protect our devices.

You can also open ports easily, apply DMZ configurations, enable UPnP, adjust NAT, filter by domain names or apply Dynamic DNS.

HUAWEI B310 4G Router wifi (6)

Phone Function

Something that totally differentiates from the other 4G routers is the possibility of being able to connect a fixed telephone and make & receive calls using the mobile network of your operator.

You pick up the handset and the Huawei B310 router itself will tone your fixed network phone, being ready to call any phone number, as long as your mobile operator allows it. It’s as if you were making a call from a cell phone, but here you do it from a landline. You can also receive calls in it, and if the landline has a viewfinder, you can see the number of the person who is calling the number assigned to you by your mobile operator.

This function proves to be quite useful for those who want to have internet and telephone in a single device. With the Huawei B310, you will have Wi-Fi internet and fixed network telephone to call and receive calls.

Conclusion

There are many 4G Routers in the market and we had the opportunity to try several models, but I personally like the Huawei B310 router much more than the others, since I found it quite useful in terms of functions.

The first thing I liked was its Wi-Fi coverage, which reaches up to 200 meters, which in my case was more than enough to keep me good signal throughout my house without WiFi extender.

The external antennas that this router brings, served me enough to improve the reception of the signal from the operator, as this LTE CPE B310 makes the signal is received much more intensely than what you currently receive on a smartphone, which ensures you a very good service.

I personally used Vodafone 4G network and shared it via Wi-Fi in my house, reaching speeds in excess of 50Mbps, which I found remarkable. And since I do not have a fixed telephone at my house, I took advantage of connecting one to this router. The latter is very useful for people who do not have a fixed Internet and telephone service, in addition to saving a lot of money in the monthly fixed charge, having the freedom to choose the plan yourself which suits you.

Considering the full practical functions for users, we would certainly recommend it as an excellent alternative.

Availability

The Huawei B310 4G Router is available locked with network providers, but you can also get the unlocked units from www.4gltemall.com . With unlocked one, you can change your network provider if you are unsatisfied with the networks or services. And you can even take the unlocked Huawei B310 Router to other countries or areas and work with the compatible network providers. And actually, the Huawei B310s-22 has many brother models such as B310s-927, B310As-852, B310s-518 etc. They are for various LTE network providers and compatible different network frequency bands. So before you buy the router, choose the right one for your location and your network provider.

Huawei B525 4G LTE Cat6 Router Released

Huawei presented a new 4G LTE advanced Router with carrier aggregation. The model number is B525, also named Huawei 4G Router Prime. With LTE cat6, Huawei B525 could achieve download speed to 300Mbps and upload speed to 50mbps. The similar predecessor Huawei E5186 router was available for almost two year and it’s the most popular 4G LTE Cat6 router.

Huawei B525 is the latest desktop router LTE this manufacturer. It combines the advantages of the well-known devices Huawei B315 and B310 router. Users can use the interface WLAN 802.11ac (max. 786 Mbps) or 4 Gigabit LAN ports. Huawei B525 router allows you to get connections for up to 64 wireless devices with transfer speeds up to 300 Mbps in LTE category 6. This means that the the use of the network is very fast and convenient regardless of the intensity. Even when using multiple devices at the same time you can browse the Internet or transfer data without losing liquidity connection.

HUAWEI B525 B525S-23A (2)

The B525 Router will also likely equipped RJ11 port for voice, which will provide telephone communication in the GSM network (2G / 3G) or based on VoIP technology (3G, 4G). Huawei router B525s has two SMA connectors for connecting external antennas and it allows you to connect up to four devices using the standard LAN ports, what’s more, up to 64 devices could access internet through WiFi. It’s perfect for people who often need to share mobile internet for several devices at the same time.

HUAWEI B525 B525S-23A (3)

To connect to the internet, you need only a few minutes. Just follow the instructions”Quick Setup” included within the web interfaces and you will enjoy access the network through Huawei B525S Router. Below are the details specifications for Huawei B525 for reference.

Huawei B525 Specifications:
* Max. Transfer speed: 300 Mbps (DL) / 50 Mbps (UL)

* Backwards compatibility: 3G, EDGE, GPRS

* Frequencies of operation:

– LTE FDD 800/900/1800/2100/2600 MHz

– Dual-band HSPA+ – 900 / 2100 MHz

– Quad-band EDGE / GPRS – GSM 850/900/1800/1900 MHz
* Standard WLAN: 802.11 a / b / g / n / ac

* Ethernet RJ-45: 4x 10/100 / 1000Mbps

* Internal WLAN antenna

* Socket for external antenna: 2 x SMA

* Phone Jack: 1x RJ11 (VoIP, CS voice)

* Local management of the browser

* Dimensions: 226 x 153 x 52 mm

* System requirements: Windows XP SP3 or later, Mac OS x 10.7 or later

* Built-in slot for the SIM card: yes (microSIM)

* Sim lock: no

HUAWEI B525 B525S-23A (4)

If you need the external antenna for Huawei B525 Router, we would like to recommend below the two antennas. We had tested the antennas and they can work well with Huawei B525 LTE Router:

http://www.4gltemall.com/4g-antenna-two-sma-connector.html

4G LTE Indoor Antenna (2 x SMA Connectors) for Huawei/ZTE 4G LTE Routers/Gateway/LTE CPE

If you prefer 4G outdoor antenna to get better signal, you could try below the antenna:

http://www.4gltemall.com/4g-lte-outdoor-antenna-2-x-sma-connectors.html

4G LTE Outdoor Antenna (2 x SMA Connectors) for Huawei/ZTE 4G LTE Routers/Gateway/LTE CPE

Huawei E5771 New 4G Pocket WiFi Router

As the famous vendor for mobile MiFi 4G routers, Huawei offers us a new model that succeeds to Huawei Mobile WiFi Pro E5770. With a notable feature, the new model Huawei E5771 does not have an LCD screen.

huawei E5771

The highlight of the Huawei E5771 Mobile WiFi is the huge 9600 mAh internal battery (non-removable) that provides up to 38 hours of operating time.

HUAWEI E5771

On the other hand, the E5771 has a small LED’s on the slice, which indicate the essential information, one for the data transfer activity, the other 4 indicating the status of the battery. In addition to these LEDs, the power button on the upper face and having the initials “Hi ” comes alive with different colors of green, orange and red, indicating the reception quality of the 3G/4G signal.

HUAWEI E5771

Of course and as usual, all the indications SSID, Wifi password and Barcode to flash for a smartphone, are located under the hood of the Huawei E5771. Still under the hood, there is a SIM card slot in micro-SIM format and the slot for a micro-SD storage card (up to 32 GB), for storing data. The connected devices with E5771 could share the data in the storage card.

HUAWEI E5771

To configure and administer the Huawei E5771 Mobile Hotspot, user can log in a web interface accessible not only from a PC, but also access from the Hi-Link application for smartphone, which gives you access to essential functions.

On one side of the Huawei E5771, there are 2 USB ports, one in full size is designed to recharge a device such as a smartphone, thanks to its 9600mAh battery, and the other one is in micro-USB allowing charging of the E5771 hotspot.

HUAWEI E5771

The Huawei E5771 Hotspot comes with its charger, but also with its USB cable to connect the micro-USB port to the charger or the port of a PC. The special feature of this cable is that it also serves as a carrying strap for the case. It’s not stupid to have it always with you.

HUAWEI E5771

Huawei E5771 Specifications

Huawei E5771 is a 4G Category 4 router, allowing you downlink of up to 150 Mbps and uplink to 50 Mbps. The supported frequency bands are:

* (4G) LTE FDD 850/900/1700/1800/1900/2100MHz

* (4G) LTE TDD 1900/2300/2500/2600MHzMHz

* (3G): DC-HSPA+/HSPA+/HSUPA/HSDPA 2100/1900/1800/1700/900/850/800MHz
* (2G) GSM / GPRS / EDGE 1900/1800/900/850MHz

HUAWEI E5771

It is therefore compatible with almost all the operators over the world. And there are many variant models for various network frequency bands such Huawei E5771s-852, Huawei E5771s-856, Huawei E5771h-937 etc.. The Wi-Fi standard is 802.11 b/g/n; 2.4GHz (no ac 5GHz) , and it supports 10 simultaneous wireless users. The battery is given for 38 hours of operation and 500 hours in standby, it is not removable.

The HUAWEI E5771 is now available at www.4gltemall.com for a price of $ 189USD. There are 3 colors are available, White, Black or Gold.

Conclusion

For some users, the absence of an LCD is not good, since it is compensated by various indicator lights; the Huawei E5771 presents a rather nice aesthetics and especially a huge battery that offers an excellent practical function.

With the powerful network compatibility (not totally) and at an affordable price of $ 189, the Huawei E5771 is a good compromise, knowing nevertheless that it offers neither the category 6 to 300 Mbps nor WiFi ac 5 GHz. If you want a 4G mobile WiFi router with screen or with the latest LTE category 6 carrier aggregation technology, you may check the Netgear Aircard 790s or Huawei E5786 or E5787. They are the latest new models with advanced technology, but it’s a pity, they don’t have the large battery as E5771.

Huawei E8377 CarFi VS ZTE VFi MF905

More and more people show great dependence to WiFi, even when they are on the go, especially in a car. The manufacturers in China has notice the demand and provided solution for this. We had introduced Huawei CarFi E8377 many times in the past year. You may get familiar with it. And another Chinese vendor ZTE also provide the similar product ZTE VFi MF905 for the network demand in a car. Here come the questions: What’s the difference between Huawei E8377 and ZTE MF905? Which one is better? In this article, you will find the answer for this.

Appearance

ZTE VFi MF905 comes later than Huawei E8377, but the two mobile WiFi hotspots look alike in shape and color. They are both in black color and used for cigarette cradle in a car. There is a USB port in the body, and of course there is a slot for SIM card in the two hotspots. But the SIM card slot in Huawei E8377 is covered by a small cap. The SIM card slot in MF905 is just above the USB port. On the top side, the logo and LED indicators are shown. The power button is at the center of the top.

Technical Specifications

They are both with LTE Category 4 technology, so they can achieve peak download speed to 150mbps and upload speed to 50mbps. The transmission date rates are very good for daily surfing. But whether the surfing speed could be stable when a car is in high speed driving, it still needs time to test.

As a follower, ZTE MF905 could support up to 8 wireless users to access internet while Huawei E8377 supports only 10 users. But in most cases, they are enough to use in a car. There is no official saying about the WiFi coverage distance, but we suppose there is no any problem for the WiFi to cover a whole car.

Control

If user want to do some setup in the CarFi, they can connect the tablets, smartphones or PCs with WiFi and log in the web interface to setup. But here now, Huawei and ZTE also provide a new option for users. User can download the apps to setup the two CarFi. For Huawei E8377 CarFi, you may use “Huawei Mobile WiFi” app. And for ZTE MF905, the app name ZTE Link could be used for settings.

Frankly speaking, the two Car WiFi hotspots are very similar. We cannot tell which one is better from the specifications and features. Only the real test would tell which would have more stable and better performance. We will take a test next time in real driving situation to see this result.

If you had read some review before, there is also other solution for the Car WiFi. The model number is Huawei E8372 and Alcatel W800. They are in the shape of USB dongle, not like the E8377 and MF905. But with the cigarette plug, it would be also OK to use in a car. If you want to know more details of them, welcome to check on www.4gltemall.com .

NetGear Presents hotspot 4G AirCard 810 (AC810S)

NetGear AC810: a new hotspot for future

The Netgear AC810 is a new 4G hotspot router that works with the SIM card of a mobile operator in micro-SIM format. Compatible Class 11 for 4G LTE, it achieves data rates up to 600 Mbps. We also note the presence of a Dual Band mode (2.4GHz and 5GHz) to get better rates. We also note that it is compatible with networks 4G LTE and 3G in Europe, the Middle East, Africa and Asia, as well as 3G networks worldwide. That’s great to take the aircard 810s when traveling.

The body of netgear 810s is really small and can therefore be taken easily in a bag or even a pocket.

Netgear aircard 810s front

Accessories included with the AC810S

The Aircard 810s obviously have a removable battery for obtaining a range of up to 11 hours in use and 250 hours standby. A USB3.0 cable enables charging on USB and a USB Power Adapter is provided. A cable for the Jump Boost Technology recharges other smartphones based on the battery from the AC810.

netgear aircard 810 package content

Multiple connections

The Netgear AC810S can connect through the simple creation of a Wi-Fi 802.11 ac standard. By default, it already has a network name and a password, which are indicated under the battery but you can easily change these settings through the onboard menu.

Automatic management of the SIM card

If you insert a SIM card that also includes calls, SMS and MMS and not just the data as in our tests, you can view the SMS directly on the AC810 via the Messages menu. Here we have used a SIM card from France network carrier Bouygues Telecom. We must then enter the PIN code of the SIM card so that the hotspot automatically retrieves the operator settings.

Netgear Aircard 810s sim slot

A touch screen for the Netgear AC810s

The screen quality is good but do not expect to the retina. Here the touch screen is simple but effective; it navigates in the menus like on a smartphone. The buttons and back home are also tactile. This is a 2.4-inch LCD colors. This screen also allows checking the quality of connection, the connection type, the data consumed and the number of days remaining for this contract. It’s very useful for users.

Netgear Aircard 810s Antenna connectors

We tested the hotspot with an iPhone, an iPad and a MacBook Pro connected simultaneously and did not encounter any problems. Indeed, the Aircard AC810 is able to accommodate up to 11 devices simultaneously.

AC 810 Hotspot Features

We note that the menu offers access to operators and settings that can enable WiFi 5GHz mode, allowing for better transfer rates essentially with the 4G high speed. Of course, your equipment must be compatible with the Wi-Fi standard in order to make the best. This is actually the wireless N.

Here are the full specifications for Netgear Aircard 810s for reference:

Network technology

4G LTE, Class 11 with triple-band carrier aggregation
DC-HSPA+, HSPA+, HSPA
4G LTE
3G

Network bands supported

4G LTE FDD 800/900/1800/2100/2600 MHz
4G LTE TDD 2300/2600 MHz
3G 850/900/1900/2100 MHz

Wireless

11ac/b/g/n
Wifi Dual Band 2.4 or 5 GHz

Required configuration

11ac WiFi-enabled device/b/g/n 2.4 or 5 GHz
Windows 10, 8, 8.1 and 7 (32/64 bit), Windows RT, Windows Vista (SP2, 32/64 bit), XP (SP3, Media Center Edition 32/64 bit) or Mac OS X 7.0 or later

Physical characteristics

Dimensions: 112 x 69 x 15.5 mm
Weight: 132 g
SIM card type: Micro SIM (3FF)
Independent activity: until 11 am
Standby time: up to 260 hours
Display: touch screen 2.4 “

Package contents

mobile hotspot AirCard 810 (AC810)
removable lithium-ion battery (2930 mAh)
Cable for Jump Boost
wall Charger
USB cable with Micro USB Connector
Quick Start Guide

We will propose soon a test for mobile use with flow measurements in several situations. Check more Netgear Aircard 4G hotspots here: http://www.4gltemall.com/4g-wireless-router/netgear-4g-lte-router.html

TP-LINK M7650 LTE Cat11 Mobile WiFi Hotspot

Internet is now very important for our daily life. So there is a great demand of gadgets for wireless connection from users. The alternative of using a mobile phone as a WiFi access point or modem is not always comfortable, and when running this function, the mobile phone may consume much battery that cannot always afford. TP-LINK gives us another option for wireless connection: TP-LINK M7650 4G LTE WiFi Router.

This TP-LINK M7650 is a new mobile pocket WiFi router upgrading from its predecessor TP-Link M7350 and is compatible with the standard LTE CAT11, which allows speeds up to 600 Mbps. It’s the most attractive feature on M7650 MiFi which also uses the protocol WiFi AC to work with the bandwidth of 5 GHz, less congested and more stable. The TP-link M7650 is compact to carry smoothly in your backpack or briefcase and with a battery of 3,000 mAh to use throughout an entire working day.

The TP-LINK M7650 is very interesting for professionals who regularly work with your laptop outside the office, and it’s a great partner for travel. This portable WiFi router can insert a SIM data card and start connecting with the Internet in just seconds. This versatility is very useful as an alternative to using our own smartphone as a WiFi access point. The TP-LINK M7650 is based on Qualcomm chipset and compatible with the network 4G CAT11, with maximum speeds of up to 600 Mbps. So multiple devices could connect to TP-Link M7650 and surf in high speed. The maximum supported user could reach to 32 terminals.

This means that the M7650 Mobile WiFi is ready for the future, because currently the main operators could only provide top speeds of 300 Mbps. In addition, another advantage of TP-LINK M7650 is compatible with the network protocol WiFi AC. This protocol works simultaneously on both the bandwidth of 2.4 GHz and 5 GHz. This first width of 2.4 GHz is used by the vast majority of devices. However, the main problem is that it is very congested. This causes interference and loss of signal quality. Meanwhile, the bandwidth of 5 GHz is faster and more stable. The maximum speeds supported by the TP-LINK M7650 are 300 Mbps bandwidth in the 2.4 GHz and 867 Mbps in the 5 GHz.

tp-link-m7650-2

Today, most launched mid- range and high-end devices, including smartphones and tablets and laptops, already incorporate support WiFi AC. The TP-LINK M7650 uses a compact design to smoothly take in trips and journeys. Within the design of the TP-LINK M7650, we must highlight the small screen from which we can view key data as the connection speed at which we are transmitting data, consumed data, the number of connected devices or the status of the battery.

tp-link-m7650-3

Speaking of battery, this model integrates with a capacity of 3,000 mAh that helps us work throughout the whole day without having to worry about power-off. And there is an option to expand the internal space to save files directly to the access point through a MicroSD memory card up to 32 GB. Users connected with the M7650 could share the files freely.

Here now, we only know the Netgear Aircard 810s has similar specifications to TP-Link M7650 mobile WiFi hotspot. And the aircard 810s is already available for Australia network provider Telstra. TP-link M7650 would be available for Spain carrier. We would update the news on www.4gltemall.com once it’s available here.

ZTE MF286 4G LTE Cat6 Wireless Router Review

With the development of LTE network technology, more and more network providers are trying to upgrade the network to LTE advanced with carrier aggregation. Then more and more users are demanding for LTE Cat6 equipments so as to achieve possible fast downlink and uplink speed. Finally, ZTE presents its first LTE category 6 wireless router since Huawei had its LTE cat6 router E5186 and E5175 on sale for long time.

ZTE MF286

Built-in battery for Mobile Use

ZTE MF286 looks similar to the traditional wireless home router, but in this new router, ZTE had designed a built-in battery so that users can not only use the MF286 as a stationary router at home, but also take the MF286 router outdoor for mobile use. With the 3000 mAh battery, ZTE MF286 can support a conference call for up to 4 hours or share a 4G network for up to 3 hours. It can’t be taken in a pocket like ZTE MF970 LTE Cat6 MiFi, but it’s useful for multiple devices’ network support.

ZTE MF286

High-speed 4G Connection

Like the Huawei 4G LTE Cat6 routers, ZTE MF286 can achieve peak download speed to 300Mbps and upload speed to 50mbps on LTE networks. The speed is almost the double of the current speed on LTE Cat4. If user downloads a movie of 1GB, it may only take few seconds on this speed. ZTE MF286 Router can achieve this due to the Qualcomm WTR3925 RF transceiver chipset based on the 28 nm process with the Qualcomm MDM9230 modem based on the 20 nm process. The new chipsets perform better and consume less power than its predecessors.

Dual-band WiFi and support for 802.11ac

Compare with the current home routers, ZTE MF286 CPE has almost the highest level to support WiFi 802.11b/g/n/ac and 3 x 3 multiple-input multiple-output (MIMO) technology with three spatial streams for maximum performance. It operates on both 2.4 GHz with great wall-penetration capabilities and 5 GHz with a lower chance of picking up interference. The powerful gadget also supports gigabit wired connections so that it is possible to copy files over a LAN at a speed higher than 80 MB/s.

In the test, ZTE MF286 proves to have good signal coverage; it can cover an office larger than 500 square meters. The signal attenuation is not obvious even at a point far from the device. Internet surfing is smooth, even in a meeting room separated by glass doors.

ZTE MF286

High-Definition VoLTE Call

Conference calls are an indispensible part of business interactions. As a standard feature for high-end wireless routers, ZTE MF286 supports advanced VoLTE voice calls. You can connect it to a telephone or a conference hands-free telephone system to get a much better call quality than regular telephone calls.

With 4 RJ-45 Ethernet ports, there is a USB port which connects a USB disk to share pictures, files or videos among the users on the same WiFi network. As ZTE’s first 4G LTE Cat6 router, the MF286 Router has many selling points which are practical for users. But Huawei E5186 has been on the market almost one year ahead of ZTE MF286, we can’t tell whether the MF286 will gain the trust from customers even though Huawei E5186 CPE doesn’t have the battery.