Category: Specifications

OnePlus Nord – New 5G Middle-class Smartphone

As one of the competitive mobile phone manufacturers in China, OnePlus had new 5G phone OnePlus 8 and OnePlus 8 Pro for high-end smartphones, which gained good reputation based on good performance and design. Recently, OnePlus presented a new 5G cell phone to the public and the model number is OnePlus Nord. The smartphone with 5G is targeted in the middle class, which is in cheaper price than the OnePlus 8.

Upscale equipment at an affordable price

The OnePlus Nord offers upscale features despite an affordable retail price. The chipset of OnePlus Nord is the Snapdragon 765G 5G from Qualcomm, ie the tuned Snapdragon 765. Thanks to the integrated 5G modem, this also works in the 5G network (n1, n3, n7, n28, n78). Depending on the version, the SoC is supported by 8 or 12 GB RAM. There are also 128 or 256 GB of storage space.

 

 

The display of the OnePlus Nord is 6.44 inches in size, uses AMOLED technology and has a resolution of 2,400 x 1,080 pixels. The aspect ratio is 20: 9, the refresh rate at a high 90 Hz. This ensures a smoother scrolling, especially when scrolling. The battery of the device is 4,115 mAh. According to the manufacturer, the OnePlus 5G phone should charge 70 percent within 30 minutes, so that the phone is quickly ready for use again.

 

 

A total of six cameras

The manufacturer uses a quad camera with four lenses on the back of the OnePlus Nord. The main sensor used is the Sony IMX586 chip with a 48 MP sensor and an aperture of f/1.75. This also has optical and electronic image stabilization. There are also an 8 MP ultra wide angle, a 2 MP macro and a 5 MP depth sensor. There is also a dual selfie camera in the front. The main sensor has a resolution of 32 MP and supports 4K videos with up to 60 fps. There is also an 8 MP ultra-wide angle sensor with a field of view of 105 degrees.

 

 

 

The OnePlus Nord is available in the two colors Blue Marble and Gray Onyx. Official sales start on August 4th in the OnePlus online shop. But it is also available at Amazon and other shops and can be pre-ordered. The price for the small version with 8 GB RAM and 128 GB storage is 450USD. The large version with 12 GB RAM and 256 GB storage costs 600 USD.

Zyxel Released New 5G Indoor and Outdoor Routers

The network specialist Zyxel released three new 5G routers for indoor and outdoor use. The model NR5101 is designed as a classic indoor 5G router, the model NR7101 is intended for outdoor use and the Zyxel N2101 is a 5G Pocket WiFi router. All the devices are compatible with several 5G frequency bands and also support 4G/LTE networks as fallback.

Zyxel NR5101 indoor 5G router

If you are looking for a 5G router for stationary use in the building, you should take a closer look at the NR5101 from Zyxel. The device offers support for all important 5G frequency bands and can also use LTE in the gigabit range. In 5G operation, data rates of up to 2.34 GBit/s can be achieved in the download, up to 1.2 GBit/s are possible in the uplink.

The Zyxel NR5101 has two RJ45 Gigabit Ethernet LAN connections and 6 integrated antennas for mobile radio. WLAN is of course also supported; users can use the latest WiFi 6 standard with up to 1.8 GBit/s. Below are the general Specifications of Zyxel NR5101 5G router:

* FWA solutions for 4G & 5G mobile networks

* Supports 5G Non-Standalone & Standalone mode

* 5G DL 2.34 Gbps UL 1.2 Gbps

* DL 4×4 MIMO, 5G NR and LTE

* Built-in 6 high-efficiency 4G/5G antennas

* WiFi 6, AX1800 2.4 GHz/5 GHz dual-band concurrent

* Two RJ45 Gigabit Ethernet LAN ports

* Bridge and router modes, IPv4/IPv6 dual-stack

* Remote management through TR-069 and SSH

* Micro/3FF SIM card slot with eUICC/eSIM reserved

 

Zyxel NR7101 outdoor 5G router

Like the competitor model Huawei 5G CPE Win, Zyxel NR7101 router is equipped with an outdoor unit, which has IP67 protection against water. If no reception is possible in the house, the Zyxel NR7101 can be installed outdoors and thus ensure reliable Internet access even in poorly connected regions. The outdoor router can reach speeds of up to 2.3 Gbps over 5G. The 5G bands n1, n3, n7, n8, n20, n28 in the FDD mode and the bands n41, n77, n78 and n79 in the TDD mode are supported.

The NR7101 router also supports LTE and 3G. In LTE mode, even 5CA is supported in the downlink and 2CA in the uplink, and the device can also use 4 × 4 MIMO. Details can be found

The Zyxel 5G router only offers a WLAN function for administration, which also makes sense in view of the outdoor installation. The signal is transported via RJ45 Gigabit Ethernet, so that a separate WLAN router can then be installed in the building. Power is also supplied via RJ45 Ethernet (Power over Ethernet, PoE). Below are the general Specifications of Zyxel NR7101 5G router:

* FWA solutions for 4G & 5G mobile networks

* Supports 5G Non-Standalone & Standalone mode

* Support 5G frequency bands：n1/n3/n7/n8/n20/n28/n41/n77/n78/n79

* Support 4G frequency bands: B1/B3/B5/B7/B8/B20/B28/B38/B40/B41/B42/B43/B48

* Support 3G frequency bands: B1/2/3/5/8
* DL CA:
– DL 2xCA: intra-band and inter-band
– DL 3xCA: intra-band and inter-band
– DL 4xCA: intra-band and inter-band
– DL 5xCA: intra-band and inter-band within 4 bands

* UL CA: UL 2xCA: intra-band contiguous

* DL 4×4 MIMO: B1/3/7/38/40/41/42/43

* DL 256-QAM: Yes

* UL 64-QAM: Yes

* MIMO (UL/DL): 1×4

* WiFi AP: 802.11ax 2×2

* 5G DL 2.34 Gbps UL 1.2 Gbps

* DL 4×4 MIMO, 5G NR and LTE

* Built-in 6 high-gain 4G/5G antennas of up to 9 dBi per element

* Standard 802.3af Gigabit PoE LAN port

* Hardened IP67-certified enclosure with industrial-grade components

* Micro/3FF SIM card slot with eUICC/eSIM reserved

* Bridge and router modes, IPv4/IPv6 dual-stack

* Remote management through TR-069 and SSH

Zyxel NR2101 5G mobile WiFi router

Besides the NR7101 and NR5101 Router, Zyxel also presented a 5G mobile WiFi router and the model is NR2101. It also supports the latest 5G technology, supporting many 5G frequency bands with 4G LTE networks backward compatible. NR2101 5G Router supports WiFi 6 with dual-band WLAN.

As a 5G pocket WiFi router, the Zyxel NR2101 has a removable battery of 5300mAh, which can provide working time up to 10 hours. In addition, one RJ45 Gigabit Ethernet port is available in this device, which is missing in the competitor model Huawei 5G mobile WiFi. Below are the general Specifications of Zyxel NR7101 5G router:

* FWA solutions for 4G & 5G mobile networks

* Supports 5G Non-Standalone & Standalone mode

* Support 5G frequency bands：n1/n3/n7/n8/n20/n28/n41/n77/n78/n79

* Support 4G frequency bands: B1/B3/B5/B7/B8/B20/B28/B38/B40/B41/B42/B43/B48

* Support 3G frequency bands: B1/2/3/5/8
* DL CA:
– DL 2xCA: intra-band and inter-band
– DL 3xCA: intra-band and inter-band
– DL 4xCA: intra-band and inter-band
– DL 5xCA: intra-band and inter-band within 4 bands

* UL CA: UL 2xCA: intra-band contiguous

* DL 4×4 MIMO: B1/3/7/38/40/41/42/43

* DL 256-QAM: Yes

* UL 64-QAM: Yes

* MIMO (UL/DL): 1×4

* WiFi AP: 802.11ax 2×2

* 5G DL 2.34 Gbps UL 1.2 Gbps

* DL 4×4 MIMO, 5G NR and LTE

* Built-in 6 high-efficiency 4G/5G antennas

* WiFi 6, AX1800 2.4 GHz/5 GHz dual-band concurrent

* One RJ45 Gigabit Ethernet LAN ports

* Power: USB 5V

* 5300 mAh removable battery provides up to 10 hours working time

* 2.4” touch screen

* Nano/4FF SIM card slot with eUICC/eSIM reserved

 

Availability Time and Price

It is not yet clear when the three new Zyxel 5G routers will be available in the market. And we also don’t know the Zyxel 5G router prices. We will update the info once there is news here.

Huawei 5G CPE Pro 2 Available to Buy

As the upgraded successor to Huawei 5G CPE Pro, the new and more powerful 5G Router Huawei 5G CPE Pro 2 is available recently in the markets. The Huawei 5G CPE Pro 2 comes with the model number H122-373, which was introduced in early 2020 and now is for sale in China and some European countries.

Huawei 5G CPE Pro 2 Specifications

 

Like the predecessor, Huawei 5G CPE Pro 2 is SIM unlocked for global use. Alternatively, the 5G router can also be purchased together with a contract or with a contract extension. The Huawei 5G CPE Pro 2 is a high-quality and very well-equipped 5G router for stationary use. The chipset of the Huawei 5G router is the Huawei Balong 5000 chipset, combined with the Huawei Gigahome WLAN chipset. A special feature in comparison with other router models is the integrated active fan, and according to Huawei sayings, this should work very quietly.

 

Huawei 5G CPE Pro 2 supports various 5G NR frequency bands including bands n1/n3/n5/n/7/n28/n38/n40/n41/n77/n78/n79. According to Huawei, the theoretical maximum data rates of up to 3.6 GBit/s in download and 250 MBit/s in upload over 5G. When working on 4G LTE networks, 1.6 GBit/s can still be reached in the downlink and 150 MBit/s in the uplink. In addition, the 5G router even supports the 5G standalone standard.

 

The WiFi module in the Huawei 5G CPE Pro 2 supports the latest WiFi 6 standard and can therefore easily forward the high mobile speeds to modern end devices. In theory, up to 2.4 Gbit/s are possible in the 5 GHz band and up to almost 600 Mbit/s in the 2.4 GHz band. The router can connect up to 128 devices at the same time. Since the Huawei 5G CPE Pro 2 also supports WiFi mesh with “HiLink Mesh”, the WiFi network can be expanded accordingly if required.

 

Like the Huawei 5G CPE Pro, Huawei has also installed two RJ45 Gigabit Ethernet connections, one of which also works as a WAN port if required, i.e. here you can connect the router to a DSL modem, for example. A PDF data sheet with the complete technical data of the Huawei H122-373 5G CPE Pro 2 is available for download from 4gltemall.com .

 

Here now, the Huawei 5G CPE Pro 2 is available to buy but price is a little bit higher than the Huawei 5G CPE PRO. If you can’t wait to enjoy amazing 5G surfing speed, Huawei 5G CPE Pro 2 will be a good option for you. Here you can click the link to buy this new 5G router: https://www.4gltemall.com/huawei-5g-cpe-pro-2.html

OPPO 5G CPE Omni Released

The OPPO Mobile Telecommunications from China’s Guangdong has announced a new NR/LTE terminal “OPPO 5G CPE Omni“. It is a stationary wireless LAN router called the customer premises equipment (CPE) that supports the NR method of the 5th generation mobile communication system (5G).

This is the first 5G CPE for Guangdong OPPO Mobile Telecommunications. The CPU is equipped with Arm Cortex-A53 and the operating frequency is 2.2GHz. The communication modem is equipped with Qualcomm Snapdragon X55 5G Modem-RF System. There are two color variations, Classic White and Mystic Blue.

 

 

The new 5G CPE device offering speeds of up to 7.5 Gbps. The Oppo 5G CPE Omni supports millimeter wave and sub-6 GHz dual network frequency bands as well as 5G connections via the company’s “O-Motion 360-degree” antenna solution. The 5G millimeter wave antenna can rotate +/-180 degrees and achieve loss-free and anti-locking during operations, said Oppo, adding that it also supports 2X MIMO and is backed by the “O-Reserve” 4X MIMO antenna in the sub-6GHz frequency.

 

As the most advanced 5G CPE device in the industry, the OPPO 5G CPE Omni not only supports millimeter wave and sub-6 GHz dual network frequency bands, but also offers users an amazing 5G connection experience powered by the firm’s proprietary O-Motion 360° 5G antenna solution.

 

Users expect high speed, stable connectivity and blind angle free signal reception from CPE products. As the most advanced 5G CPE device in the industry, the OPPO 5G CPE Omni not only supports millimeter wave and sub-6 GHz dual network frequency bands, but also offers users an amazing 5G connection experience powered by the firm’s proprietary O-Motion 360° 5G antenna solution.

In terms of connectivity, OPPO 5G CPE Omni supports the most advanced Wi-Fi 6 protocols and can connect up to 1,024 devices simultaneously thanks to the integration of the Qualcomm IPQ8074A Wi-Fi chip. In the 5GHz channel, it supports up to 80MHz 8×8 MIMO. In the Dual Band Dual Concurrent (DBDC) mode, the theoretical peak transmission rate between Omni and other devices can reach up to 6Gbps. Omni also supports Mesh Network, Bluetooth low energy protocol (BLE 4.1) and ZigBee 3.0, enabling the expansion into multiple business scenarios in the future.

 

Omni is also the world’s first 5G CPE to support the MPTCP (MultiPath TCP) protocol. When the 5G cellular network and wired network are working concurrently and one of them fails, the MPTCP protocol algorithm will transfer the device from the failed network to the other function, ensuring seamless network switching and avoidance of data transmission interruption due to intermittent network failures. In addition, due to the use of the MPTCP protocol algorithm, Omni also supports dual frequency Wi-Fi rate overlapping of 2.4GHz and 5GHz channels, providing a higher and more stable Wi-Fi experience for devices.

 

 

The OPPO 5G CPE Omni launch is set to accelerate the rollout of the 5G network globally, offering users an unprecedented 5G experience. Oppo didn’t reveal any availability or price details for this new 5G CPE, but we suppose it will be available in coming two months.

OPPO 5G CPE T1 Review

5G networks are becoming more and more popular worldwide. And more and more users enjoy 5G network through the 5G terminals. The Chinese mobile phone manufacturer OPPO recently released a new 5G wireless router named OPPO 5G CPE T1, which can transfer 5G network to WiFi network via only one 5G SIM card.

 

OPPO 5G CPE T1 Appearance

The appearance of OPPO 5G CPE T1 looks very similar to the predecessor Huawei 5G CPE Pro, which was already available last year and is now used in many countries. They are both in white color and simple design. The top of OPPO 5G CPE is made of acrylic material and is transparent, which makes the 5G wireless router look cool.

 

On the back, there are two LAN ports and one port for LAN/WAN. Above the LAN/WAN ports, there is a USB 2.0 port. The WPS and power buttons are above the USB port with the two TS-9 connectors for an external 5G antenna. The power plug port is below the LAN ports. The LAN/WAN ports provide wired connection if your devices don’t support WiFi.

Like the Huawei B818 4G Router, the SIM card slot of OPPO 5G CPE T1 is at the bottom with the reset hole. The SIM card slot is for NANO SIM. Beside the SIM card slot, there is a label indicating model number, power consumption, web IP address, web log in name and password, SSID for 2.4GHz and 5GHz, and WiFi password.

 

OPPO 5G CPE T1 Specifications

Based on Qualcomm Snapdragon X55 chipset, OPPO 5G CPE T1 supports 5G SA/NSA dual modes, and can achieve download speeds up to 4.1Gbps. The OPPO T1 5G CPE covers many popular 5G network frequency bands.

 

In addition, OPPO 5G CPE T1 supports WiFi-6 and so provides much better wireless performance than predecessor WiFi 5 routers. The OPPO 5G Router can use O-reserve to optimize so as to get the best signal through 5G antenna. For heat radiation, the OPPO 5G CPE T1 adopts chimney design. At the top and bottom of the OPPO 5G CPE T1, there are ports for heat radiation.

OPPO 5G CPE T1 Management

Like many other 5G CPEs, the OPPO 5G T1 CPE can be managed via OPPO Smarthome APP or web interface. The APP can simplify the settings and adjustments. It’s very easy to bind the 5G device with the APP and control the CPE. In the APP, users can detect the 5G signal, which can guide users to select the best position to locate the 5G CPE in a house.

 

The OPPO 5G CPE T1 is now available in China. Whether it will be available in other markets, it’s unknown yet. If you are interested in this new 5G CPE, you may follow us for future test.

 

Redmi 10X and 10X Pro 5G Smartphone Presented

A couple of days ago, Xiaomi subsidiary Redmi announced the new 5G cell Phone: Redmi 10X 5G and Redmi 10X Pro 5G. The most exciting thing about it is the new SoC adopted, the newly unveiled SoC Mediatek Dimensity 820 works in the new mid-range 5G smartphone.

MediaTek Dimensity 820 SoC

It was a few days ago that Mediatek launched the Dimensity 1000+, a new top SoC. Now the next “System on a Chip” follows with the Mediatek Dimensity 820, which is for 5G smartphones of the upper middle class.

 

The new Dimensity 820 should be at the same level as the Snapdragon 765G from Qualcomm, since it also has 5G support on board. Eight ARM cores with a structure width of 7 nm are used as the CPU. In detail, these are four ARM Cortex-A76 with 2.6 GHz and just as many ARM Cortex-A55 with 2.0 GHz clock rate. There is also an ARM Mali G57 GPU with 5 cores. According to the manufacturer, further features of the Mediatek Dimensity 820 include support for LPDDR4x-RAM M up to 16 GB, displays with a 120 Hz refresh rate and 2,520 x 1,080 pixel resolution as well as cameras with max. 80 MP. Thanks to HyperEngine 2.0, mobile games should also run well on smartphones with the new Mediatek SoC inside.

Redmi 10X and 10X Pro – mid-range 5G smartphone

Matching the new SoC, Redmi 10X 5G is the first smartphone that has installed it. Here now the Huawei Honor Play 4 5G phone also uses the MediaTek 5G chipset. The Redmi 10X 5G smartphone comes in 6.57 inches size and the display is AMOLED capacitive touchscreen that provides 1080 x 2400 pixels resolution. The screen is protected with Corning Gorilla Glass 5. Additionally, it consists of HDR10+ and 600 nits typ. Brightness.

 

The Xiaomi 5G smartphone is fueled by a Non-removable Li-Po 4520 mAh battery + Fast charging 22.5W. The phone runs on the Android 10.0 + MIUI 11 operating system providing smooth operation of the device.

The rear camera consists of a 48 MP (wide) + 8 MP (ultrawide) + 2 MP (depth) sensor lenses that help to click pictures. The front camera has a 16 MP (wide) sensor. The smartphone is Splash-proof which makes the users care-free. Xiaomi Redmi 10X 5G is available in different colors like Blue, Gold, and Pink/Blue.

 

Both phones pack a 4,250mAh battery. The Redmi 10X Pro 5G variant supports charging speeds up to 33W, while the non-Pro version caps out at 22.5W. Redmi is throwing in a fast-charging brick in the box. Some of the other features include support for dual-5G SIMs, an under-screen fingerprint sensor, an IR blaster, and a 3.5mm audio jack.

The primary differences between the Redmi 10X 5G and Redmi 10X Pro 5G lie in their cameras. The former comes with a triple camera setup consisting of a 48MP primary sensor assisted by an 8MP ultra-wide camera, a 2MP depth sensor, and a 16MP selfie snapper. The Redmi 10X Pro adds an 8MP telephoto lens to that setup and upgrades the selfie camera to 20MP. Oh, and there’s NFC support on the Pro model too.

 

 

Both phones will be up for grabs in the Chinese market this week. There is no word about their international availability just yet. Still, it shouldn’t be long before Redmi releases them in highly competitive markets such as India, before making them available in Europe.

 

With the Redmi 10X 5G, Xiaomi also offered Redmi 10X 4G, which is offered at a cheaper price since loss of 5G support. If you don’t really need 5G, 4G version may also be good to consider.

VIVO Presented X50 Series 5G Smartphones

A couple of days ago, the new 5G smartphones Vivo X50, X50 Pro and X50 Pro Plus were officially announced in China. As the high end series 5G smartphones, the X50 series will compete with the 5G cell phones from other brands such as OPPO, Xiaomi and Huawei.

Snapdragon 765G and 865

The equipment of the three VIVO 5G Smartphones from the BBK subsidiary Vivo is quite different. It is important to mention, however, that they are all 5G-compatible, i.e. they support the new cellular standard. The mid-range SoC Snapdragon 765G is used in the Vivo X50 and the Vivo X50 Pro. There is also 8 GB RAM and 128 GB or 256 GB storage. In the VIVO X50 Pro Plus, the flagship model of the X50 series, the top SoC Snapdragon 865 with 8 or 12 GB RAM and 128 GB or 256 GB memory is installed. The battery measures 4,200 mAh, 4,315 mAh or 4,350 mAh.

The 5G mobile phones all have a 6.56-inch AMOLED display that has a resolution of 2,376 x 1080 pixels. The top model X50 pro Plus is with 120 Hz, while the other two models with 90 Hz. The display also has a 32 MP front camera in a punch hole. However, there are differences in the camera on the back. The X50 Pro Plus uses the Samsung ISOCELL GN1 sensor with 50 MP, Tetracell technology and dual pixel auto focus. There is also a 32 MP portrait camera, a 13 MP periscope zoom camera and a 13 MP ultra wide-angle lens. A 48 MP main camera is installed in each of the two cheaper models, the X50 and X50 Pro. There is also a portrait camera with 13 MP each, an ultra wide angle with 8 MP and in the X50 a 5MP macro or in the X50 Pro an 8 MP periscope zoom camera.

VIVO X50 Series Specs Comparison
Model X50 X50 PRO X50 PRO Plus
5G Mode SA/NSA SA/NSA SA/NSA
Chipset Snapdragon 765G Snapdragon 765G Snapdragon 865
RAM + ROM 8GB + 128GB
8GB + 256GB		 8GB + 128GB
8GB + 256GB		 8GB + 128GB
12GB + 256GB
Main camera – 48 MP, f/1.6(IMX598)(Wide)
– 13 MP, f/2.5(portrait)
– 8 MP, f/2.2(ultrawide)
– 5 MP, f/2.5(macro)		 – 48 MP, f/1.6(IMX598)
– 13 MP, f/2.5(portrait)
– 8 MP, f/2.2(ultrawide)
– 8 MP, f/3.4 (periscope telephoto)		 – 50 MP, f/1.9
– 13 MP, f/2.5(portrait)
– 8 MP, f/2.2(ultrawide)
– 8 MP, f/3.0 (periscope telephoto)
Front Camera  32 MP, f/2.5 32 MP, f/2.5 32 MP, f/2.5
Display 6.56 inches 90Hz AMOLED capacitive touchscreen 6.56 inches 90Hz AMOLED capacitive touchscreen 6.56 inches 120Hz AMOLED capacitive touchscreen
Fast Charge  33W  33W 44W
Battery 4200 mAh 4315 mAh 4350 mAh
Dimensions 159.5 x 75.4 x 7.5 mm 158.5 x 72.8 x 8 mm 158.5 x 72.8 x 8 mm
Colors Black, Blue, Pink Dark Blue, Light Blue Blue, Brown
Price/USD 659USD/724USD 799USD/869USD 869USD/949USD

 

Samsung Galaxy A51 5G – Cheaper price

The situation is different with the Samsung Galaxy A51 5G smartphone, which is also released recently. The price of Galaxy A51 5G is cheaper than Vivo X50 perhaps because the mid-range chipset Exynos 980 from Samsung.

 

ZTE AXON 11 SE 5G Cell Phone Presented

ZTE launched the new ZTE Axon 11 SE 5G cell phone this week, which offers a slightly poorer configuration compared to the older ZTE Axon 11 5G, but it offer 5G dual-mode connectivity SA & NSA.

Affordable Price for 5G Smartphone

Comparing with the current latest new 5G phones, the ZTE Axon 11 SE 5G is an affordable 5G smartphone. In China, where the device will initially come on the market, it is available from around 400 USD. There is 6 GB of RAM and 128 GB of flash memory. If you want 8 GB of RAM, you will pay more. However, the version of 8GB RAM and 256GB ROM is not yet available. We suppose it will be available in near future.

When the ZTE Axon 11 SE 5G phone will be available in other markets such as Europe has not yet been confirmed. In the past, ZTE 4G smartphones have mostly also come onto the market in this country. So we are in good spirits that the ZTE Axon 11 SE 5G will soon enrich the range of 5G smartphones in Europe. The prices in this area will then probably be somewhat higher.

Based MediaTek Dimensity 800 5G chip

Nevertheless, the ZTE Axon 11 SE 5G should still is one of the cheapest 5G smartphones on the market. But buyers still get solid equipment. The MediaTek Dimensity 800 is used as SoC. Thanks to a graphite heat sink, this should remain below 40 degrees Celsius even when gaming and still offer good performance. The ZTE 5G smartphone battery measures 4,000 mAh and is 50 percent charged within half an hour.

The display does not offer 90 Hz like the OLED from the ZTE Axon 11 5G. Instead, a 6.53-inch LCD IPS panel is installed in the ZTE Axon 11 SE 5G. The resolution is 2,340 x 1,080 pixels. In the front, the selfie cam with 16 MP is housed in a punch hole. A quad camera on the back is waiting to be used. It consists of a 48 MP main camera, 8 MP ultra wide angle with a 120 degree angle of view and ToF and macro sensor with 2 MP each.

 

Like other 5G phones in China, there is no Google play service pre-installed. So if you want to use this phone personally, you must confirm you can accept this. Or if you can root the phone yourself and install Google play yourself, then go ahead to buy this phone.

Netgear Nighthawk M5 MR5200 5G Mobile Hotspot Review

Netgear Nighthawk M5 MR5200 is a new 5G flagship mobile pocket WiFi router which was announced at the January 2020 CES trade show. As the successor to the 4G mobile router Netgear Nighthawk MR1100, Netgear Nighthawk MR5200 looks similar to the Nighthawk M1, but it has much difference and the specs configuration has much improvement. The Nighthawk MR5200 is likely destined to be AT&T’s 5G mobile hotspot, but it’s not the first one. The first one is the Netgear Nighthawk M5 Fusion MR5000.

Netgear Nighthawk M5 MR5200 Appearance

Like the Nighthawk MR5000, the Netgear 5G Router features a touch screen interface, gigabit ethernet port, USB-C for charging and tethering, and it appears to have antenna ports as well. From the 2.4″ color LCD touch screen, users can conveniently monitor data usage, see WiFi name/password, mobile signal strength, and manage device and network settings. Time, date, data usage and important status information are displayed on the lock screen.

 

Netgear Nighthawk M5 MR5200 Specifications

Netgear Nighthawk M5 MR5200 is based on the Qualcomm Snapdragon X55, a second generation 5G modem chipset, supporting all versions of 5G, including both millimeter-wave and sub-6 networks, it also supports Wi-Fi 6 for devices that are connected to it.

 

Simply connect your Nighthawk M5 Mobile Router to your existing home router to deliver 5G speeds throughout your home. The router supports the latest 5G Technology: 5GNR Sub 6 GHz (NSA). It also supports LTE CAT.22, LTE Advanced, 4×4 MIMO, 256QAM.

The Qualcomm Snapdragon X55 will also support dynamic spectrum sharing – allowing 4G and 5G technologies to co-exists on the same frequency bands, allowing for a faster rollout of 5G coverage nationwide. And when there is no 5G coverage to be found – the M5 will support the latest Cat-22 LTE technology, theoretically capable of well over gigabit speeds in fully developed LTE areas. The M5 also has other benefits of 5G, including up to 10x lower latency compared with 4G, and much better spectrum efficiency.

 

Netgear is claiming the 5G mobile router will have enough horsepower to enable peak theoretical 5G downlink speeds of “Close to 4Gbps” – though it will undoubtedly take a long time for cellular networks to evolve to support this level of performance.

 

 

 

 

Netgear Nighthawk MR5200 WiFi 6 Technology

The other exciting new feature included in the Nighthawk M5 is support for Wi-Fi 6, the next evolution of the Wi-Fi standard more technically known as 802.11ax. Wi-Fi 6 hotspots and routers will remain backwards compatible with Wi-Fi 5 and Wi-Fi 4 clients too – and the Nighthawk M5 supports simultaneous use of both 2.4GHz and 5GHz Wi-Fi spectrum with as many as 32 client devices connected at once. With increased capacity, you get faster speeds for high-end video streaming on your smartphones, tablets, and computers.

 

Netgear Nighthawk MR5200 Battery

For the power source, the M5 uses a USB-C port for charging and a removable rechargeable battery. Netgear says the mobile router has a long battery life, but can also work when plugged in, with the battery removed. The Netgear Nighthawk M5 mobile router features a long lasting battery for all day usage. You also have the option of plugging into a power outlet at home for a 24/7 operation with battery removed.

 

 

Netgear Nighthawk MR5200 Price and Availability

The Nighthawk M5 5G WiFi 6 Mobile Router is available in the second half of this year. The price of M5 MR5200 is not yet known but once it’s available, we will update it.

 

 

Huawei 4G Router 3 Prime B818 Review

Huawei B818 was introduced two years ago but recently, Huawei supplied this new 4G wireless router to the market and some network providers. Huawei B818 4G router Prime has two variant models now: Huawei B818-260 and B818-263. The Huawei B818-263 is also named Huawei 4G Router 3 Prime.

The Huawei B818 is a 5G ready router (LTE Cat. 19). The Huawei 4G WiFi router is unlocked – works without any problems with any network with a maximum download speed of up to 1600 Mbit/s, and sending up to 150 Mbit/s. The router has many languages available for web interface settings and is easy to use. The full package content includes: Huawei B818 router, power supply, RJ-45 cable, user manual, warranty card and white box.

 

Huawei B818 is a stationary router that can support up to 64 devices (32 on 2.4 and 5.0 GHz). It has a built-in Ethernet socket; you can connect two external antennas (3G and LTE) to it. You can conveniently manage the router using the HiLink application (available on Android and iOS platforms). The Huawei B818 router has a WPS button that makes it easy to pair devices with the router. Huawei B818 is the successor to the well-known Huawei B618s.

The main Specifications of the Huawei 4G Router 3 Prime:

  • SIM unlocked for global use
  • Download speed up to 1600 Mbit/s (LTE category 19)
  • WiFi 802.11 a/b/g/n/ac, dual 2.4 GHz and 5 GHz wireless network
  • Support up to 64 connected devices
  • Support for every network in Poland (and Europe)
  • 2 x LAN 10/100/1000 Mbit/s
  • 1 x WAN 10/100/1000 Mbit/s
  • LTE download speed up to 150 Mbit/s
  • Management option via the Huawei HiLink application

Huawei B818-263 Applications:

  • Huawei 4G Router 3 Prime is a very fast LTE cat. 19 router. It can support up to 64 users at the same time, so it’s perfect for both home and office. Thanks to 4×4 MIMO technology that increases the throughput of your local network several times, you will get a fantastic speed of up to 1.6 Gbit/s. The device is equipped with 4 internal antennas that extend the data transmission range by 40% and guarantee you a strong and stable signal also in large, multi-level rooms.
  • Huawei 4G Router 3 Prime is very easy to use thanks to the Huawei application. It will help you find the best location for the router, and will also allow you to independently manage network traffic, parental control, network protection or guest accounts. What’s more, the router will provide you with several levels of security: encryption, network security against unauthorized persons and quick logout of unauthorized users.

Smooth operation

  • HUAWEI B818 gives you uninterrupted Internet access thanks to the combination of a mobile network and an Ethernet connection. Get access to fast internet using Wi-Fi or a network cable. You can also create your own local network.

Powerful antenna

Support up to 64 users

  • HUAWEI B818 sensationally meets the needs of small and medium-sized enterprises supporting use by up to 64 people via a Wi-Fi connection.

 

 

Here is the general Specification of Huawei 4G Router 3 Prime B818:

Supported bands: LTE Cat19 / HSPA+ / HSDPA / HSUPA / HSDPA / HSPA / UMTS / WCDMA / EDGE / GSM

Data download: up to 1600 Mbps

Data upload: up to 150 Mbps

Connectors:

  • SIM card slot
  • 2 LAN (RJ45) inputs,
  • WAN / LAN port (RJ45),
  • Entry to the telephone port (RJ11),
  • Two switches on the external antenna.

WLAN: WiFi 802.11 a / b / g / n / ac 2.4 GHz and 5 GHz

LED diodes:

  • Cellular network signal strength indicators,
  • Power indicator
  • Status indicator
  • LAN indicator
  • Wi-Fi indicator
  • Mode indicator.

Functions:

  • Administrative website, full router management using a web browser from a computer or mobile device (also using the Huawei HiLink App mobile application),
  • 2 SSID,
  • WPS
  • Limit on the number of Wi-Fi devices (up to 64),
  • Choice of Wi-Fi channel width and number,
  • SMS support,
  • DHCP
  • Remembering the SIM card PIN,
  • Counter and data limit
  • List of blocked Wi-Fi devices,
  • Login Manager.

Dimensions: 102 x 103 x 225 mm

Weight: 620 g