4G LTE Mall

Huawei E5885 LTE Mobile WiFi Pro 2 Available

Huawei recently introduced a new 4G Mobile router as a successor to the popular Huawei E5770 Mobile WiFi Pro Hotspot: the Huawei E5885 (Mobile WiFi Pro2). The LTE router offers a 6,400 mAh strong battery, which is to allow up to 25 hours of operating time and, of course, besides the usual WLAN, an RJ45 LAN connection is again available. The integrated LTE modem is twice as fast as the predecessor with up to 300 MBit/s for download. The Huawei E5885 is only available in Asia now. In Europe, the device is only yet available.

LTE Cat6

The E5885Ls-93a version, which is currently available in the online market, is intended for the Asian market. Most of the packaging is labeled in Chinese or English and the supported frequency bands mainly take into account the Asian needs. Nevertheless, according to the data sheet from Huawei, the Huawei E5885 also supports all LTE frequency bands (volume 3, 7, 8, 20) which are important for Europe areas. Also UMTS on 2100/900 MHz and GSM network are supported.

In comparison to the predecessor Huawei E5770, the speed is also important to note: the support of LTE category 6, ie up to 300 MBit/s in the downlink and up to 150 MBit/s in the uplink. LTE Cat6 with channel bundling (Carrier Aggregation) is now used by many network operators and therefore one should notice the improved modem in some situations. However, it is not particularly advanced, because the Netgear AC810 LTE Hotspots have been available for long time, which can reach 600 MBit/s (LTE Cat12) for download.

RJ45 LAN & WLAN

The Huawei E5885Ls-93a is particularly interesting because it offers a full RJ45 LAN connection. This allows devices without WLAN to be connected to the network without any problems, without the need for additional software, as well as to use the Ethernet port for Internet access and to use the E5885 as a WLAN hotspot without mobile radio. Something strange, however, appears the fact that the connection is a “normal” 100 Mbps LAN connection, where the LTE modem can use up to 300 MBit/s.

If you want to use the full modem speed, then must be forced on Wi-Fi. According to Huawei, up to 32 devices can be supplied simultaneously with the Internet, the speed should be better thanks to 802.11ac standard (2.4 GHz and 5 GHz) in the best case than over LAN.

Large battery

Another unique feature of the Huawei E5885 Mobile WiFi Pro2 is the huge 6.400 mAh battery. Up to 25 hours of operating time should be possible. As an alternative to the predecessor, the device can be used as a power bank, for which a corresponding charging cable is already included in the package box.

Summary

Huawei E5885 is a good mobile 4G Router with powerful function for multiple situations. It’s cool in appearance and supports LTE advanced network. When Huawei presents the English versions for global market, we suppose it would be great gadget star in future.

Samsung Presents LTE Cat.18 Modem with 6CA Support

Samsung has introduced a LTE Advanced Pro modem for use in the Exynos chipset series, which is expected to achieve up to 1.2 Gbit/s in the downlink thanks to carrier aggregation, 4 × 4 MIMO and 256QAM technologies. The modem works with LTE category 18 and should be next to the Qualcomm Snapdragon X20, the first modem to provide such high speeds. The market for mobile radio modems is shared by a few large manufacturers, such as Qualcomm and Samsung, Intel, Mediatek and HiSilicon (Huawei).

LTE Cat18

In Europe, LTE of category 12 is currently being used (mid 2017), which corresponds to speeds of approximately 500 MBit/s at Vodafone. However, the development proceeds rapidly, the 3GPP Release 13 has also defined the LTE category 18 Downlink, which enables up to 1.2 GBit/s. The high data rates can be achieved by an extended antenna technology (4 × 4 MIMO) and by a better modulation (256QAM). Some of the features defined in 3GPP Release 13 are also advertised as LTE Advanced Pro, which is a further development of LTE Advanced.

First 6CA modem

According to Samsung, the new modem is the first LTE modem that can bundle up to 6 frequency bands simultaneously (6CA). Other hitherto available high-end modems can be a maximum of 5CA, many chipsets built in current mid-class smartphones can only 2CA or 3CA. In addition to 6CA, 256QAM and 4 × 4 MIMO, the Samsung Modem supports eLAA (enhanced Licensed Assisted Access), ie the use of unlicensed radio spectrum. For future applications, it is conceivable that network operators also use radio spectrum, which has so far mainly been used for WLAN (5 GHz range). Initial tests have shown that parallel operation of LAA and WLAN is possible without problems.

Use in the Galaxy S9?

The new Samsung LTE modem will go into mass production from the end of 2017 and is expected to be used in 2018 in new high-end devices with Samsung Exynos chipset. For the Samsung Galaxy Note 8, which is expected in August 2017, this is, of course, too late, but possibly we will see the Samsung LTE Cat18 modem in the Galaxy S9, which is expected to be released in spring 2018.

Difference between ZTE UFi MF980 and Netgear Aircard 810s

Since more and more network providers deployed LTE advanced networks, many vendors over the world are providing new LTE gadgets to support the latest new LTE networks. The US vendor Netgear Wireless and Chinese vendor ZTE are two of them. Netgear presents the Aircard 810s with support of LTE Category 11 and ZTE provides the UFi MF980 with support of LTE Category 9. In this article, we will check what the difference is between the two mobile 4G Routers.

Appearance

The Netgear Aircard 810s has a 2.44 inch LCD touchscreen, user can do simple settings like operating a smartphone. However, the ZTE MF980 UFi’s 1.44 inch TFT screen is not a touchscreen, so it can be operated by the power and func button, web interface or by ZTELink APP. Of course, the Aircard 810s could also be operated from web interface and Netgear aircard APP. The ZTE UFi MF980 is very thinner than Netgear Aircard 810s, so the feel in hand is better.

They both have two connectors for external LTE antennas and the connector type is TS-9. The connectors in Aircard 810s are located at the two sides of the USB ports with small caps, while the connectors of ZTE MF980 are together. And they both use Micro SIM.

Battery

The battery of Aircard 810s is removable and the SIM card slot is in the battery slot. The battery capacity is 2930mAh, which could support 11 hours for continuous use. The battery of ZTE MF980 UFi is built-in and can’t be removed. And its battery is 2200mAh, which is enough for daily use, but can’t be changed to backup battery. But they both don’t have slot for Micro SD card.

Technical Specifications

With Qualcomm Snapdragon X12 chipset and the support of LTE Category 11, Netgear Aircard 810s could support peak download speed to 600mbps. ZTE UFi MF980 could achieve download speed to 450mbps and upload speed to 50Mbps with the support of LTE Category 9.

Netgear Aircard 810s could connect up to 15 wireless users simultaneously while ZTE UFi MF980 could support up to 32 wireless users to access internet, on this point, ZTE UFi MF980 seems more powerful than Aircard 810s. Regarding the WLAN feature, they could support latest Wi-Fi 802.11ac with 2 X 2 MIMO on dual band(2.4GHz and 5GHz).

Other feature

The Netgear Aircard 810s has an extra function called Jump Boost, which makes it could work like a mobile power bank to charge other electric devices such as smartphone, Pads etc..ZTE MF980 UFi doesn’t have this function per the official description.

Conclusion

Comparing the features and specifications of the Netgear Aircard 810s and ZTE UFi MF980, it’s not doubt that Aircard 810s is better than ZTE MF980. With higher configuration, Netgear Aircard 810s can provide better performance for internet connection, but price would be higher. ZTE MF980 UFi is also good for most users with budget price. But the built-in battery may not be a good feature if you want it to work for long time.

Actually, there are many more 4G Routers for LTE advanced networks, if you want to check more devices, welcome to check on www.4gltemall.com .

ZTE MF980 4G Mobile Router Test

With the LTE network evolving to LTE-Advanced, more and more LTE gadgets are needed to support the advanced network so as to meet the requirements from end-users for faster internet speed. ZTE MF980, also named ZTE UFi MF980, is one of the new gadgets.

We got the ZTE MF980 4G mobile router for a couple of weeks and today we have time to take a test for this new LTE router. It’s in black color but much thinner than current popular models such as Huawei E5786 and Mobile WiFi Pro 2 E5885.

Appearance

The ZTE MF980 has a 1.44inch screen, but not like the high-end 4G LTE-A mobile hotspots from Netgear such as Aircard 790s and Aircard 810s, it’s not a touch screen. The ZTE and UFi are listed at two sides of the screen. On top edge, the power button and func button are there with a reset hole. At the opposite edge, two connectors for external 4G Antennas are covered by a small cap. The USB3.0 port is at the middle of the edge while the right side is SIM card slot. It uses Micro SIM. On the back of the ZTE UFi, there is only ZTE Logo. The back cover is not tight with the whole body, which makes you think it could be removed, but we tried, the back cover can’t be removed. So the battery is built-in and can’t be changed.

Operation

Long press the power button for 3 seconds on the top edge, the ZTE UFi MF980 will start working. The screen will show the signal bars, network provider’s name, users quantity connected from WiFi, battery status and the consumed data. For simple setup, users need to press the FUNC button to switch menu and power button to confirm.

In the simple menu, we can see it includes Data Connection, Device Info, WiFi QR Code, WPS, Global Roaming, Quick Boot. Click FUNC to next and click Power button to OK. Users can click to connect the data, and scan the QR code to connect to the router with the ZTELink APP. No more setup is allowed through the two buttons on ZTE UFi. If you want do more settings, you need log in the web page http://ufi.ztedevice.com or 192.168.0.1. Firstly, you need connect the WiFi from ZTE MF980 and enter WiFi key. When log in the web UI, the default password is admin. And there is PC and Mobile option per user preference.

On the head of the web page, user can shutdown the device, modify login password and logout by one click. Two languages are available: English and Chinese. In the middle of the page, there is a switch button to on and off LTE connection. Below is the setting button to click and enter into the setting options. Users can setup the connection by adding new APN, select preferred network (four options: 4G only, 3G only, 2G only and Automatic).

There are more options to setup the WiFi, user can setup the SSID name, security mode and password. If necessary, user can also enable the Guest SSID and WPS. In the WiFi advanced settings, user can select the WiFi band (2.4GHz and 5GHz available), Network mode (two options: 802.11b/g/n and 802.11 n only), Channel Bandwidth(20MHz/40MHz or 20MHz) and frequency channel. User can also select the country if necessary.

In the Advanced Settings, user can setup the power-save mode by choosing the WiFi coverage distance and WiFi Sleep time. And the router settings allow user to setup the IP address and DHCP. There are also options for firewall settings, such as Port filtering, Port mapping, UPnP and DMZ. User can also setup the firmware update check and reset or restart the router manually.

All setting for the ZTE MF980 UFI is very simple but important if you need them. User can also do the setting through the ZTELink APP, but has to install the APP in the smartphone first. We didn’t take the speed test this time, we will do the speed test by comparing it with the latest Netgear Nighthawk M1 MR1100 in following weeks and will provide full report after test. You can follow us for coming testing report.

ZTE MF910 4G Mobile Router Test

Many people are demanding higher speed for internet connection, even when they are on the go for vacation. If the LTE network is available, user just need a reliable mobile WiFi router to fulfill this. The ZTE MiFi router MF910 would do this job well for a good network partner.

ZTE MF910

The model ZTE MF910 is the big brother of our previously tested model ZTE MF65+. It offers the same features, but it is faster and more durable. Hard data: the MF910 gadget can be used continuously for 8 hours downloading data at speeds up to 150Mbit/s, in standby mode, it can withstand almost a week, and the maximum use of its services may as many as 14 other devices.

ZTE MF910

The manufacturer does not provide any information on the overstatement. ZTE MF910 battery in fact it is difficult to unload. Internet speed is of course dependent on the extent and network environment. The router I tested using a SIM from Plus network. Even outside the city to check it perfectly, even when the coverage rate on small but readable screen does not show the five bars. Without any problems I could browse mail, Facebook, portals and watch the video on YouTube.

ZTE MF910

I was surprised how well I downloaded from the Internet file weighs about 500 MB. In fact, I did not feel the difference in speed compared with that to which I am accustomed when I use the network in your own home.

There is no any problem regarding the hardware configuration. Comparing with the ZTE MF65+ MiFi, it should be the biggest advantages of this router. Just turn the whole holding down one button. That’s enough to be able to enjoy access to the Internet. All the smartphones and tablets that “paired” with the MF910 did not have any problems with that hardware. I can only complain to the location of the SIM card slot. It is devilishly difficult to correctly add to the router.

ZTE MF910

The whole body weighs 106g and the size is similar to a candy package (65x 14.6 x 104 mm). It’s a little larger than the ZTE MF65+ caliber, but still there is nothing to prevent the router to throw in a bag or backpack, or put it in his jacket pocket.

ZTE MF910

ZTE MF910 MiFi is equipment that meets all the expectations from customer. It will provide high-speed internet in both the cottage and will save you and your closest collaborators, when the company’s network will refuse to obey. If you are looking for a good partner for outdoor activities, ZTE MF910 is highly recommended. The most important, the price is aggressive for most users.

ZTE MF910

Difference Between Huawei B618 and E5180 LTE Cube

You may use the Huawei E5180 LTE Cube at home for wireless internet connection. It’s a good wireless router in cool shape like a cube. With the development of LTE networks, the end-users and the network providers have a higher demand for the user equipment. Here comes the new LTE router Huawei B618, which seems to be upgraded from the Huawei E5180 cube and in this article, we will see what’s the difference between the Huawei B618 and E5180, and what functions have been improved from the old one to the new one.

Appearance

Following the Cube shape design of Huawei E5180, Huawei B618 is also in white color but has a larger body and higher if stands on a desk. Perhaps because the B618 has more interfaces for multi-functions, the B618 weights much more than E5180. On the front of Huawei E5180, there is only one signal indicator and one WiFi indicator, but on the B618, there are three signal indicators, and the power, status, LAN, WiFi, mode indicators & WPS button are listed.

On the back, Huawei E5180s-22 has one LAN port, one telephone port and one power plug port. The E5180s-610 only has one LAN ports, no telephone port. Two connectors for the external antenna are listed at another side of the body. Huawei B618 has two LAN ports(one is also for WAN), one USB 2.0 port, one telephone port and power plug port. What’s more, the B618 router also has the power button and two connectors for external antenna, which are covered by a small cap.

On the top side, Huawei E5180 has the Huawei logo but it’s empty on the Huawei B618 top side. They both have one label on the bottom, which indicates the model number, SSID, WiFi key/password, power rating, IMEI and S/N number, and other certification logos. The Huawei B618 has extra WPS Pin on the label. And they both have the SIM card slot at the bottom and uses a Micro SIM card.

Technical Specifications

As an LTE Category 4 router, Huawei E5180 can support peak download speed up to 150Mbps and upload speed to 50mbps. The new Huawei B618 LTE Cat11 router could achieve almost 4 times the speed from E5180, i.e download speed to 600mbps. Huawei E5180 can support maximum 32 users to access the internet while Huawei B618 can support 64 WiFi users, which is double of that from E5180.

The WLAN standard of Huawei E5180 is IEEE 802.11 b/g/n on single band 2.4GHz. The Huawei B618s-22d can support the latest 802.11 ac besides a/b/g/n on dual-band (2.4GHz and 5GHz).

Management

The two routers could both be managed from the web interface in the browser, but Huawei also provides the APP to manage the routers from Smartphones or Pads.

It’s no doubt that the Huawei B618 with higher specs is much better than E5180, but frankly speaking, the Huawei E5180 cube is enough for most users at home or office. If you don’t have too many requirements for the router, Huawei E5180 is budget one to recommend. Huawei B618 is also good to recommend because it’s future-proof and would provide fantastic surfing experience under LTE-advanced networks.

Huawei B618s-22d 4G LTE Router Available

It’s a long time since the Huawei B618 4G Router was firstly released by the manufacturer Huawei. Some information shows the Huawei B618 4G LTE Router was already available in some network providers’ data plan. Good news is that we get the unlocked Huawei B618 4G Router now.

Huawei B618 B618s-22d 4G Router

The Huawei B618 Router is packed in white box with the image of B618 printed on the front with the model number. The device is in white color and looks good. Protected by a plastic bag, the Huawei B618 is unlike usual wireless router shaped in a cube, so it’s also called Huawei B618 Cube. When it stands on the desk, it looks like a humidifier.

Huawei B618 B618s-22d front logo and indicators

On the front, we can see the Huawei logo and below is are the LED indicators including three signal bars, WPS button, Power indicator, Internet Status indicator, LAN status indicator, WiFi indicator and Mode indicator. On the back, we can see the power button, one USB2.0 port, One LAN port and one LAN/WAN port, one telephone port and power adapter plug port. At the top are the two connectors for external antenna covered by a small cap.

Huawei B618 B618s-22d USB LAN WAN Telephone ports

The connector type of the Huawei B618 external antenna is TS-9 and we had tried the antenna with two TS-9 connectors with the Huawei B618 Router. They are working together very well.

Huawei B618 B618s-22d connecting external antenna

Like its predecessor Huawei E5180s-22 Cube, there is a label at the bottom of the device, which would show more details about this device. We can see it indicates the model number is B618s-22d. Below the model number, there are SSID name, SSID 5G name, WiFi key/password, IP address for web management, user name and password for log in web IP address, and the WPS Pin code.

Huawei B618 B618s-22d bottom label

On the right side, it indicates the input power is 12V-2A, and the IMEI number & S/N are listed with the bar code. The CE0682, RoHS and WiFi certified with the Made in China and Huawei Technologies Co., LTD are also on the label. Below the label is the SIM card slot, which is also covered by a cap to protect from dust. User needs to open the cap and plug in the sim card. At the SIM card slot side, it’s the rest hole. If you want to reset the router, you need press the reset button the hole for few seconds.

Here now the original new and unlocked Huawei B618s-22d is available on www.4gltemall.com, if you are looking for a cool 4G wireless router supporting LTE-Advanced networks, Huawei B618 Cube should be a good option.

ZTE MF65+ 3G Mobile WiFi Router

For the mobile router, users usually require two things: easy to use and high-speed data connection. To meet higher requirements for network connection, the Chinese manufacturer ZTE had presented a new 4G mobile hotspot to the market. The model number is ZTE MF65+. The name is similar to its predecessor ZTE MF65, but they had different design.

The ZTE MF65+ 3G MiFi converts a 3G mobile connection into a Wi-Fi network. To insert a SIM card in the ZTE MF65+ 3G Mifi and then the ZTE MF65 3G+ MiFi start a Wi-Fi network. You can then make your tablet, laptop or smartphone connect to this wireless network and enjoy an internet connection. For example, if you have an iPad without 3G, after connecting with the WiFi from ZTE MF65+, the iPad would be online outside the door.

And the ZTE MF65+ 3G MiFi can support up to 10 WiFi devices simultaneously, your family or friends may also possibly on the internet (of course only if you give them the password for the Wi-Fi network). Moreover, there is no software to connect required to connect with the WiFi network!

The ZTE MF65+ 3G Mifi is supplied in a white version, and has an impressive industrial design. The OLED display shows the signal type, signal strength, battery status, Wi-Fi mode and more. With ZTE Mobile WiFi app, it is very easy to manage ZTE MF65+ 3G Mifi. For example you can remotely control WiFi on or off, check the battery level and signal strength, read messages and find all connected devices.

According to the specifications from ZTE, the MF65+ allows to download data at a maximum speed 21.6Mbit/s and upload speed to 11Mbit/s. Of course, these speeds refer to “laboratory conditions”. In real network condition, you may not fulfill this speed, but you will get fast enough speed for surfing.

ZTE MF65+ has a removable battery of 1500mAh, which is charged by using cable with the micro USB (as the typical smartphone). With full battery, ZTE MF65+ can keep working for 6 hours for data transmission, while it can stand up for days up to 300hours according to the manufacturer. With occasional use of the network you do not have to worry about charging your router. When connecting the MF65+ router to your computer, you can transfer files from an SD card, which can be placed in the router. You don’t need use additional software to do that.

With simple operation and fast internet connection, ZTE MF65+ is a good 3G pocket router to recommend. If you are wondering over buying a wireless router, then ZTE MF65+ is good enough with budget price. Actually, LTE is becoming the mainstream now all over the world, if you prefer to get high internet speed, you may check 4G mobile hotspots which support much faster than 3G mobile hotspot, you can check the 4G mobile routers here for reference: https://www.4gltemall.com/ue-category/lte-category-6.html/

Huawei E5180s-22 4G WiFi Router for Bouygues 4G Box

The French network provider Bouygues Télécom offers a 4G data plan for areas with poor ADSL coverage. The plan details has been using available especially in the areas eligible for this offer. The 4G data was offered to improve Internet reception for ADSL subscribers in poorly covered areas.

To do this, the operator proposes a 4G “Box” with a SIM card and an “unlimited” monthly data plan. The 4G Box is actually the Huawei E5180 LTE Cube, which is a 4G Wireless Router and working with the 4G SIM card. To look at it more closely, the LTE router provide WiFi signal with an Ethernet connection.

Basically, the 4G router is praiseworthy for underserved users, especially with an unlimited monthly data offer. However, this offer is accompanied by many restrictions that greatly reduce the notion of unlimited internet BOX, although it is important for users to provide better internet experience.

First, you have to be eligible for the offer. The offer only includes data, excluding the Voice and of course the TV. The Huawei E5180 LTE router is not mobile, so user can’t take it outdoor for holiday or weekend activities. Bouygues reserves the possibility of limiting the bit rates in video download to 2 Mbps if necessary.

The 4G+ is not available. The “BOX” Huawei router (LTE Cube E5180), was widely distributed by operators as part of data offer, especially by Orange at one time. The E5180 router only supports the 4G category 4, so is limited to a theoretical rate of 150 Mbt/s for download and 50 Mbt/s for upload. It’s not bad to compensate for a very bad ADSL speed, but damage for a so-called “widely” 4G+.

The Huawei E5180 supports WiFi 802.11 b/g/n but is limited to 2.4 GHz. The 5GHz is not available. If the model is Huawei E5180s-22, the supported bands are 4G LTE Band 1/3/7/20/38 (FDD 800/1800/2100/2600 MHz), and it supports up to 32 wireless users simultaneously. An RJ45 port and an RJ-11 port are available for WAN/LAN connection and telephone.

However, the solution of the LTE link via 4G Mifi routers is a good alternative for underserved areas in ADSL connection but correctly covered in 4G, the required condition is an adequate antenna infrastructure and backhaul Fiber capable of absorbing many connections with a large flow, a LTE router serving one or more PCs not the equivalent of a smartphone.

Actually, there is new LTE router available which is similar to Huawei E5180, and with higher specification, which could supports LTE-A network and faster downstream connection. The new model is Huawei B618, which is a LTE cat.11 router, you could check more details about if on www.4gltemall.com .

Huawei Honor 9 Hands on

If you ask for a recommended smartphone with budget price, we would recommend the Honor 8 among the Huawei brand. The device was introduced in the summer of 2016 and offers a very good price-performance ratio. For a few days now the successor Honor 9 is available in Germany (we had introduced it here). It costs similar to the predecessor and optically has not done much, but the technology inside has been brought up to date. Basically, it is a Huawei P10 in another appearance and without Leica camera technology. Today we will see why the Honor 9 can be recommended for conscience to buy.

The Honor 9 is packed in a white cardboard box, the body colors are silver and blue. Later, a black version is also to be added. The silver version was provided for the test. The silver device has a very nice “shine effect” on the back, as can be seen in the photos, but fingerprints are super fast visible. In the packaging, we can find there is a hard plastic cover and of course a USB cable besides the device itself. As a connection, USB Type C is used; the power supply supports the Huawei QuickCharge technology, so the device can be recharged very quickly. A headset is not supplied.

Good first impression

The display is very nice bright and colors strong and true to nature. The full-HD resolution is absolutely sufficient, really not more needs with the size of about 5.2 inches. The fingerprint sensor has moved to the front in comparison to the Honor 8 and at the same time also serves as a home button. We find the positioning with the Honor 9 is very good, especially since the sensor also works very reliably and fast. In addition to the fingerprint sensor, two touch buttons for the multitasking menu and the back button have been placed, the assignment of the buttons can be customized to suit your personal preferences.

The camera also makes a good first impression. Honor 9 uses a dual camera with a 12 megapixel RGB sensor and a 20 megapixel monochrome sensor. Thanks to the HiSilicon Kirin 960 chipset, videos can finally be recorded in 4K resolution; the predecessor did not go yet.

Body: light and shadow

The body of the predecessor Honor V9 is especially rounded on the back towards the sides, whereby the Honor 9 should lie better in the hand. Now you can stand to glass backs as you want, we find them but always a bit slippery and not as nice as metal body. This is also the criticism of the Honor 9, it feels in the hand not as good as for example a Huawei P10 or an Apple iPhone 7 (both metal body). But it’s very successful about the reflections on the back: depending on light incident, the case looks darker or lighter.

First Conclusion

The Honor 9 is a good and consistent development to the Honor 8. The technology was updated, the internal user memory doubled from 32 GB to 64 GB. The dual SIM function is of course also on board again. With the multiple color options, we suppose most users would find what suit them. The Honor 9 is recommended for daily use if you don’t have many high requirements on the mobile phone.