Huawei Quidway S3700-52P-SI-AC Layer 3 Ethernet Switch
* 48 Ethernet 10/100 Base-TX ports, 2 x 1000Base-X SFP ports, and 2 x 1,000 Base-X SFP ports
* AC power supply
* Forwarding performance: 13.2 Mpps
* Switching Capacity: 64 Gbit/s
Availability: In stock
Huawei Quidway S3700-52P-SI-AC Switch is a next-generation energy-saving Layer 3 switches, which utilizes cutting-edge hardware and Huawei Versatile Routing Platform (VRP) software to provide high-performance access and aggregation to an enterprise campus network. Huawei S3700-52P-SI-AC Switch is easy to install and maintain. With its flexible VLAN deployment, PoE capabilities, comprehensive routing functions, and capability to migrate to an IPv6 network, the S3700-52P-SI-AC helps enterprise customers build next-generation IT networks.
Huawei S3700-52P-SI-AC Switch features:
* 48 Ethernet 10/100 Base-TX ports, 2 x 1000Base-X SFP ports, and 2 x 1,000 Base-X SFP ports
* AC power supply
* Forwarding performance: 13.2 Mpps
* Switching Capacity: 64 Gbit/s
Huawei Quidway S3700-28TP-SI-AC Switch Technical Specifications:
* Downlink Ports: 24 x 10/100 Base-TX Ethernet ports
* Uplink Ports: 2 x 100/1,000 Base-X, 2 x 1,000 Base-X
* MAC Address Table:
- IEEE 802.1d compliance
- 16K MAC address entries
- MAC address learning and aging
- Static, dynamic, and blackhole MAC address entries
- Packet filtering based on source MAC addresses
* VLAN Feature:
- 4K VLANs,Guest VLANs, voice VLAN, and super VLAN
- Port-based VLAN assignment
- VLAN assignment based on MAC addresses, protocols, and IP subnets
- QinQ, Selective QinQ, 1:1 VLAN mapping, N:1 VLAN mapping
* Reliability:
- RRPP (ring topology, intersecting rings, and multi-instance), implementing protection
- switchover within 50 ms
- Smart Link tree topology and Smart Link multi-instance, providing the millisecondlevel
- protection switchover
- STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)
- BPDU protection, root protection, and loop protection
- Smart Ethernet Protection (SEP)
* IP routing: Static routing, RIPv1, RIPv2, and ECMP
* IPv6 features:
- Neighbor Discovery (ND)
- Path MTU (PMTU)
- IPv6 ping, IPv6 tracert, and IPv6 Telnet
- Manually configured tunnel
- 6to4 tunnel
- ISATAP tunnel
- ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or
- protocol type
- MLD v1/v2 snooping
* Multicast
- 1 K multicast groups
- IGMP v1/v2/v3 snooping and IGMP fast leave
- Multicast VLAN and multicast replication between VLANs
- Multicast load balancing among member ports of a trunk
- Controllable multicast
- Port-based multicast traffic statistics
* QoS/ACL:
- Rate limiting on packets sent and received by an interface
- Packet redirection
- Port-based traffic policing and two-rate three-color CAR
- Eight queues on each port
- WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
- Re-marking of the 802.1p priority and DSCP priority
- Packet filtering on Layers 2 through 4, filtering out invalid frames based on the
- source MAC address, destination MAC address, source IP address, destination IP
- address, port number, protocol type, and VLAN ID
- Rate limiting in each queue and traffic shaping on ports
* Security & access
- User privilege management and password protection
- DoS attack defense, ARP attack defense, and ICMP attack defense
- Binding of the IP address, MAC address, interface, and VLAN
- Port isolation, port security, and sticky MAC
- Blackhole MAC address entries
- Limit on the number of learned MAC addresses
- 802.1x authentication and limit on the number of users on an interface
- AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
- SSH v2.0
- CPU defense
- Blacklist and whitelist
- DHCP Server, DHCP Relay, DHCP Snooping, DHCP Security
* Surge protection: 7 kV surge protection capability on service ports
* Management and maintenance
- iStack
- MAC Forced Forwarding (MFF)
- Remote configuration and maintenance using Telnet
- Auto-Config.
- Virtual cable test
- Ethernet OAM (IEEE 802.3ah and 802.1ag)
- Dying gasp power-off alarm (S3700-28TP-EI-MC-AC)
- SNMP v1/v2c/v3 and RMON
- MUX VLAN and GVRP
- Web NMS
* Interoperability
- Supports VBST (Compatible with PVST/PVST+/RPVST)
- Supports LNP (Similar to DTP)
- Supports VCMP (Similar to VTP)
* Operating environment
- Operating temperature: 0°C to 50°C (long term);
- Relative humidity: 10%–90% (non-condensing)
* Power Supply
- Rated AC voltage: 100V to 240V, 50/60 Hz, Maximum voltage: 90V to 264V, 50/60 Hz
- Rated DC voltage: –48V to –60V, Maximum voltage: –36V to –72V
- Note: PoE models do not use DC power supplies.
* Dimensions (W x D x H): 17.4 in. x 8.7 in. x 1.7 in. (442 mm × 220 mm × 43.6 mm)
* Weight: <3kg
* Power Consumption: < 38W