Huawei E5776s-601 4G LTE Cat4 Mobile Hotspot

Our site has been published several stories about 4G Mobile routers, access points and Wi-Fi with built-in cellular modems that support 3G. These equipments can be used to provide mobile access to the Internet in a variety of scenarios: working devices (e.g.: tablets) without a built-in modem, a backup channel for home, outdoor activities in the nature and on the road. We should also mention using the WiFi router can roam globally among the local operators and support several gadgets simultaneously. Thus it is possible to save much cost, as well as consume less battery.

 

Huawei E5776s-601 appearance and features

Today we tested another sub-model of this E5776 router family. Among the interesting features, the ability to support 4G/LTE network is most attractive one; with large capacity built-in battery, LCD screen and a wireless speed up to 150 Mbit/s is practical functions. Huawei E5776 offered several versions to the market, which may differ based on a range of cellular module. Our sample had a full name E5776s-601 and, according to the presented documentation, it supports 3G on 900 and 2100 MHz bands and LTE in 3, 7 and 40 (FDD 1800/2600MHz & TDD 2600MHz). We note that this E5776s-601 is also sold in a branded version of MTS named 821FT (only works with SIM-cards of this operator and its range if the device is SIM locked). There is user manual, power adapter and Micro-USB in the package box.

The size of Huawei E5776s-601 is 107 × 65 × 17 mm, and weight is approximately 140 g. However, we must realize that the battery is built-in with large capacity and a two-antenna configuration access point. At the same time, there is no wired port in the router. So the E5776 could be easily put in the bag and the pocket. The body is made of sturdy black plastic. There is no doubt that the frequent use in mobile mode, the surface becomes coated with scratches. However, the E5776 body is smooth and user friendly.

Huawei E5776s-601 4G router Settings

Huawei E5776 displays the current mode of the connection to the cellular network and the level of the signal, the number of wireless clients that connect to the internet status, battery level, the name of the operator and the amount of processed data, duration of call, the arrival of new SMS-messages. Users also have the opportunity to change the name and password of the wireless network. During normal operation, after a few second short press, the device will start to work and the screen will show the information above.

 

On the “lower” end of the router is WPS button to connect wireless clients, and there is Micro-USB connector for PC and charge the battery. There is one connector for external antenna for 3G or 4G. On the opposite side you can see the slot for memory cards microSD, hidden reset button and the standard Mini SIM-card format.

 

In terms of appearance and design, the gloss on the top panel is only one important note. You can also complain about the lack of rubber feet or other elements for mounting the router.

Huawei E5776S-601 Technical characteristics

Per the official information, the Huawei E5776s-601 4G router supports 2G networks  (GSM 850/900/1800/1900 MHz), 3G (UMTS 900/2100 MHz), 4G (LTE FDD 1800/2600 MHz, TDD 2300 MHz) with support for GPRS, EDGE, HSPA, HSPA+, DC-HSPA+ and LTE Cat4 FDD/TDD technology. The maximum data acquisition rate for 3G is 43.2 Mbit/s, and for 4G up to 150 Mbit/s (FDD). If your Huawei E5776s-601 is SIM card unlocked to one operator, you can use any SIM-card over the world.

 

Clients connect to the E5776s-601 router by Wi-Fi 802.11b/g/n, who works in the 2.4 GHz band with a maximum connection speed of 300 Mbit/s. PCs and laptops can connect with the router through a wired connection via port Micro-USB. The E5776 has inserted driver support for Mac OS 10.5-10.8 and Windows operating systems from XP SP3 to 8. When working on Wi-Fi, it does not require any drivers, and compatibility is related with the operating system on the client.

The same USB port is used for charging the built-in non-removable battery, which has an impressive capacity of 3000 mAh. With this battery, the battery can keep work for 10 hours and standby time is up to 500 hours.

 

For most users, they can take the Huawei E5776 mobile WiFi in bag or pocket for outdoor activities. And a group of people will share the wireless network simultaneously. Here now there is SIM unlocked Huawei E5776s-601 with Yes Optus logo available on 4gltemall.com . If you can wait to access the 4G network locally, you can take the HUAWEI E5776s-601 as your good partner for your hand electronics.

 

Huawei ME909 4G LTE LGA Wireless Module

Huawei ME909 is an LTE radio module for the exchange of high data rates in 4G networks and is one model of Huawei’s LGA product family. All modules of the product family are pin and software compatible.

The radio module Huawei ME909 is ready for use in LTE networks. Huawei has its LGA product family expanded to include the first LTE module: ME909 for M2M applications. The version for the European market supports seven LTE frequency bands. The module also features quad-band HSPA+/HSPA/UMTS and quad-band GPRS/GSM/EDGE, making it usable worldwide. With CDC-ECM offering, Huawei also makes the only LTE module on the market to have a virtual Ethernet port. The design is to simplify the integration into existing software platforms and reduce the load on the processor. Huawei ME909 also supports perspective GPS, A-GPS, Glonass and GPS Extra, as the announcement.

With data rates in LTE network of up to 100 Mbit/s, Huawei ME909 is especially for applications with high data throughput, such as video conferences, home gateway, routers or hotspot devices. It is also available with Mini-PCIE interface. Versions for the Japanese and the U.S. market are planned.

According to Huawei, all modules from the respective LGA product families “industrial grade” or “automotive grade” are pin and software compatible. This enables customers to develop M2M solutions on a single hardware platform. This reduces the effort and creates flexibility and sustainability.

Honor 3C Released By Huawei Today

Beijing Time, December 16 afternoon, Huawei released its new Smartphone Honor 3C and 3X in Beijing 798 Art Square 751 D PARK. A few weeks ago, the mobile terminal manager Mr. Yu Chengdong had said Huawei will present a new Mobile phone with will beat Xiaomi smartphone Red Mi. Now We see the new Smartphone.

Honor 3C waterfall with 5 inches black screen

 

Honor 3C is equipped with 5 inches 720P full screen lamination process, like a black waterfall. With the same applications and low-temperature polysilicon LTPS technology like iPhone 5, Honor 3C is with more vibrant colors, better saturation, faster speed, and power consumption is reduced by 20% -30%.

 

3C Honor with ID Design: 3C is designed in rounded corners to reduce conflict sense; ultimate compact, shock screen accounting, the screen is more narrow and experiences better.

 

Honor 3C 500 million pixels front Self artifact: 500-megapixel front camera, comes with smart beauty, self preview window, shoot himself alight; F2.4 aperture, 1.4μm large pixel sensor, 22mm wide angle lens, viewfinder physical range of up to 88 degrees; panorama self, partner child a little less.

Honor 3C Rear 8 mega pixel rear camera: SONY top BSI image sensor, 8,000,000 pixels, blue glass filter, “wisdom like” professional image processing engine; remain sound pictures, listen to photograph storytelling; F2.0 large aperture, 28mm wide angle, 4cm macro to capture the details of charm.

 

Honor 3C dual card dual standby: about 40% of Internet users are severe, the Honor of 3C is with two MicroSIM card slot, support TD-SCDMA/GSM or WCDMA / GSM dual card dual standby, use can enjoy anytime, anywhere on 3G networks. Meanwhile, the Honor 3C also retained the SD card expansion port, storage space, on-demand configuration.

Honor 3C with Emotion UI 2.0 system: the new operating system for 7 million funs together; it will bring safe, fast, comprehensive upgrade experience. Better mobile phone housekeeper, user will no longer worry; Inserted Simple UI, more suitable for the elderly and children, easy to use; cloud sync, cloud sharing, cloud housekeeper and Remote service, a number of user-friendly features, experience unprecedented.

Many colors for Honor 3C shell: shell heart is colorful, imaginative and never binding. Total 6 kinds of colors business case and textured leather to choose from.

 

 

Huawei Ascend P2 4G LTE Cat4 Smartphone

There are very few 4G Smartphones available now to support LTE Category 4 with 150 Mbit/s download speed. The Huawei Ascend P2 is one of them; it was presented in February 2013 during the Mobile World Congress. We have tested the new Smartphone in the networks of Telekom and Vodafone. Particular attention was paid to the ability in the LTE networks and the high speed data rates.

First impression and technical data
The Huawei Ascend P2 is available with black or white back. The front of the display is black for both models and both rounded upward as well as downward, which leaves a good impression. The size is 0.8 x 6.7 x 13.6 cm with a weight of approximately 122g, which is just acceptable; one hand operation is a little bit difficult.

 

The screen is 4.7 inches in diagonal size and display with 1280 × 720 pixels. This means the Huawei Ascend P2 doesn’t have the highest pixel density, but still offers an exceptionally good picture: it is very bright, the colors are realistic and the viewing angles are excellent. The operating system used Android not-so-current version 4.1.2 Jelly Bean.  Huawei has installed his “Emotion UI” surface, which should be a real simplification for most users. User can install the APPs to the smartphone. Based on the good solution design, the software is extremely fast, apps open almost instantly. Huawei P2 is not keeping up with current flagship Smartphones and not has the much more powerful hardware.  Huawei Ascend P2 is based on a HiSilicon K3V2 quad-core processor with 1.5 GHz clock rate, which are 1 gigabyte of memory.

 

Modem and Wireless
In Huawei Ascend P2 Smartphone there is built-in LTE modem that also used in various modems from Huawei, for example, the Huawei E3276 or the Huawei E5372. It allows speeds of up to 150 Mbit/s for the downlink and up to 50 Mbit/s for the uplink, i.e. LTE Category 4. In the test, the maximum speed was around 120 Mbit/s with network of Deutsche Telekom, when working with Vodafone, nearly 80 Mbit/s download speed can be achieved. In addition to LTE network supported, 3G UMTS network is also supported, but only 21.6Mbps download speed could be reached. Almost all other manufacturers now offer DC-HSPA+, up to 42.2 Mbit/s could be achieved. Huawei also offers DC-HSPA+ for many years in various modems, but why here DC-HSPA+ was saved at Ascend P2, remains a mystery. The same is also for the WLAN module: this only supports the 2.4 GHz frequency band, which is absolutely not up to date for a high-end Smartphone.

The received power is overall quite good, compared to other Smartphones but not significantly better.  Which is worth mentioning is definitely the manual network search: in contrast to most other Android Smartphones, Huawei Ascend P2 displays networks as separated by wireless technology (2G, 3G, 4G), which is a nice thing, in particular for mobile enthusiasts. You can manually switch between the 2G, 3G & 4G networks.

 

 

Miscellaneous and Conclusion
The internal memory is 16 gigabytes, which is not particularly large, especially when it is not expandable via memory card. So you have to often transfer the photos in the 4G Smartphone to a computer to get back free space. The 13-megapixel camera takes pretty good photos and also also beautiful full-HD videos. The battery offers 2,420 mAh, which is comparatively good capacity and thus a solid runtime. Not connected with LTE, the Huawei P2 can get so loose over an entire working day. All in all, the Huawei Ascend P2 is a beautiful smartphone that worth to buy based on all his good display and fast software.

 

Netgear Aircard 762s (AC762S) Mobile LTE Hotspot Available in Germany

After the network specialist Netgear has recently acquired the well-known manufacturer Sierra Wireless for UMTS and LTE modems, the first mobile LTE router from Netgear comes to Germany now. The new model number is Netgear Aircard 762S, usually in short name AC762S. The MiFi hotspot AC762S still follows the typical design of the hotspot line of Sierra Wireless, now it’s available in Northern Europe. The technical data are not quite up to date, only LTE Category 3 is supported, while some LTE Category 4 devices are already offered, such as the Huawei E5776 Huawei E5372.

Good equipment

The Netgear AC762S LTE router can supply maximum of 10 wireless devices to the Internet via Wi-Fi 802.11 b/g/n at 2.4 GHz Band. Whether an Internet connection via microUSB connector is possible, it must face a test, in any case, you can recharge the battery via the USB Interface, which would allow operation time for up to 6 hours after one charge. If the AC762s connects the computer via USB cable continuously, the Netgear 762S would keep working without any interruption. The exact capacity of the battery is 2000mAh, and the battery is removable. The operation is just like a WiFi router usually managed via a web interface in the browser, but alternatively, Netgear also offers an app for smartphones and tablets to manage the 4G hotspot . The display on the front displays important information such as the data consumption, connection speed or network technology.

Under the LTE network, the speeds of up to 100 megabits per second for the downlink and up to 50 Mbit/s for the uplink are possible. The supported LTE frequency bands allow operation in every network in Germany and in most European networks: LTE800, LTE1800, LTE2100 and LTE2600 are available. The LTE Category 4 with up to 150 MBit/s is already offered by the operator Telekom and Vodafone since the summer of 2013; however, you cannot make it come true on Netgear AC762S. In the UMTS network, the frequency bands around 900 and 2100 megahertz are available; unfortunately this feature makes it impossible to use worldwide, since important bands for the Americas missing.

The maximum speed over UMTS is 42.2 Mbit/s for the downlink and 5.76 Mbit/s for the uplink, when the Aircard 762s works on the 3G network based on DC-HSPA+. If the reception at your own location is too weak, you can connect one or two external LTE or UMTS antenna with the Netgear AC762S over the two TS-9 connectors.

The LTE mobile hotspot Netgear AC762S is now available in various online stores such as 4gltemall.com .You can find a good comparison with other mobile hotspots on our site. Actually, there is a brother model Netgear Aircard 760s which was available in few months ago. It’s already known and used by many customers. The Aircard 760s is for Australia operator Telstra. They look the same from the appearance, other features are almost the same except that the frequency bands on 3G and 4G LTE. If you want to use the mobile hotspot in America or Australia, Netgear 760s would be a good option for you.

 

Qualcomm Snapdragon chip 410 Comes for LTE World

Qualcomm has introduced a new chipset– Snapdragon 410 today for entry-level and mid-range Smartphones. A special feature of the Qualcomm RF360 is certainly the support front-end solution that enables multi-band and multi-mode LTE. In detail this means: The Snapdragon 410 chipset can be produced from about cheap smartphones of 150 U.S. dollars, which dominates all current wireless technologies, i.e. FDD-LTE and TDD LTE. And it also has a significantly expanded frequency band support ability as usual nowadays. In the first half of 2014, Qualcomm is planning the availability of first samples in the market and in the second half to take the first Smartphones to be available with the new chipset.

64-bit architecture and fast graphics
About the clock rate of the processor Snapdragon chip 410 is not yet known, according to Qualcomm 64-bit capable, and thus Snapdragon chip 410 is one of the first chipsets with this feature. The Snapdragon 410 manufactured in 28nm also has an Adreno 306 GPU process, which should speed up games, videos and other graphics. Terminal manufacturers can equip with Snapdragon 410 processor with cameras that have up to 13 megapixel resolution and also can record 1080p Full-HD videos smartphones.

Huawei E5372 4G Mobile LTE Cat4 Router On Hand

We have the 4G mobile wireless router Huawei E5372 tested on the road which provides your devices with fast LTE network. It’s also called Mobile Wi-Fi Router, and now established itself as the practical devices for 4G Internet access. Compared to simple “tethering” via smartphone, the advantages of the 4G MiFi Router are obvious: MiFi routers usually have a good reception, good wireless transmit power and a durable battery.

 

Now the Huawei E5372 mobile LTE hotspot comes on the market, and it offers speeds of up to 150 Mbit/s for the downlink and 50 Mbit/s for the uplink, depending on fare and network expansion. Through the support of Wi-Fi in the 5 GHz range, the Huawei E5372 is also suitable for trade fairs and other places where the operation of a 2.4GHz Wireless LAN is not availalbe.

 

 

Thanks to a weight of only 130 grams including the battery and dimensions of 99 mm x 62 mm x 14 mm, the Huawei E5372 is very handy and can be easily taken in pocket or backpack. The device is available in either black or white. On the front you will find a small, well-read, monochrome display that shows current information such as the reception, the network technology, the battery status and the number of connected Wi-Fi devices.

At the side of LTE mobile router, there is a micro USB cable interface for charging the battery and connects to the computer. A separate power supply is not included. The battery has a capacity of 1780 mAh and is changeable.

 

 

 

The establishment of the Huawei E5372 is simple: First, the SIM card must be inserted, then the battery and then the MiFi can be turned on with the power button on the front. After a few seconds, the E5372 is connected to the Internet, provided that no PIN protection is enabled. The configuration for wireless access is not necessary in the normal case, the Huawei E5372 recognizes the provider itself and uses the appropriate setting from a database.

 

 

The connection to tablet, Smartphone or computer is done either via USB or Wi-Fi 802.11 a/b/g/n. Normally, the wireless connection is fast enough, only if you would like to take over the full 150 Mbit/s on LTE network. The appropriate adjustment can be made using the buttons on the device, or alternatively, the configuration also by Huawei Mobile WiFi app on the tablet or smart phone or through the web interface on the computer possible. The Wi-Fi 5 GHz range is less busy frequency band and therefore less interference. For trade fairs or large events, this is worth a lot. The disadvantage of 5 GHz WLAN is the somewhat smaller range, especially in buildings.

 

 

In the test of Huawei E5372, we used the SIM cards from Vodafone and Telekom. The tariffs were activated for up to 150 MBit/s for downlink, but the maximum of 50 Mbit/s from Vodafone network LTE800 is available due to technical reasons. Overall, pretty good reception of the E5372 router could come true for uplink.  Under the Vodafone network, peak speeds of about 45 Mbit/s for downlink were possible while under the Telekom network, the maximum download speed of 118 Mbit/s was possible. On the other side, the E5372 can use the mobile Internet via GSM, UMTS in high speed.

 

 

A very important part of a mobile wireless router is the battery.  Huawei E5372 has a capacity of 1780 mAh and allows operation time of about 5-6 hours, depending on usage. Unlike many other mobile LTE hotspots, the E5372 battery can be changed in a few seconds, so for some users, a second battery could be useful.

 

 

Conclusion

The Huawei E5372 is a small mobile LTE hotspot that can score in the test with a fast modem and current WLAN technology. The software is fast and offers many options. Huawei E5372 is the perfect mobile hotspot for smartphone, tablet and other WiFi terminals. So far the router is available at 4GLTEMALL.com , you will know more about it after you get it on hand.

 

China Mainland 4G licenses Issued— Three Operators Get TD-LTE

According to information sources, the Ministry has officially released the 4G licenses to three operators this afternoon, China Mobile, China Telecom and China Unicom all have received TD-LTE license.

Mainland official release 4G licenses, meaning that after the 3G launched to commercial for nearly five years, three domestic telecom operators finally granted a 4G license to get a start qualification 4G commercial, the three operators will be able to achieve 4G business commercial in Mainland justifiably. These operators will thus speed up the pace of deploying 4G-related work.

In fact, before this, the three operators have invested varying degrees of resources in 4G areas. China Mobile has taken the lead in a number of cities, such as Guangzhou, Hangzhou, Beijing etc…And some of them had launched a commercial trial 4G services. It is understood that China Mobile’s next plan will expanded the cities of TD-LTE network coverage to 300 or more cities.

While China Telecom recently launched preparatory work on 4G terminal, and issued a demand books of the terminal part to the 4G mobile phone manufacturers. At present, China Telecom has completed the first LTE network equipment tender, to build a 4G Network with FDD base stations accounted 70%, TDD base stations accounted for 30%.

China Unicom launched the first LTE equipment bidding at the end of October this year, totally Purchasing 52,000 LTE base stations, including 10000 TD-LTE base stations, 34000 FDD-LTE base stations, 8000 FDD-LTE indoor stations. Meanwhile, China Unicom has a comprehensive upgrade its 3G network downlink speeds to HSPA+ 42Mbps.

It’s generally believed that the competitive landscape of the three operators in 3G era will probably be broken in the upcoming 4G era. After 4G license released, the three operators stand on the same starting line again. It says that, 4G market will be a bigger cake, the three operators who can seize the best market opportunities in the new competition, will be able to benefit from them.

In addition, after the 4G license issuance, the investment will therefore be accelerated in the entire telecommunications industry and the mobile Internet industry. Followed 4G licenses issued, mobile Internet field may also be spawned a new round of start-ups, such as high-definition video conferencing, mobile gaming, 3D navigation applications suitable for broadband mobile networks under large data will also become a reality.

However, for the majority of consumers, the 4G licensing of commercial is not equivalent to real arrival of 4G eras. It must go through a maturation process, among which there are many problems to be solved. For example, the depth of coverage of the network, the popularity and decline cost of 4G terminal, down 4G tariffs and so on.

 

Huawei E3531 HSPA+ 21.6Mbps USB Surfstick

Huawei E3531 comes available in 4th Quarter of 2013, as a new surf stick on the market. Huawei E3531 is mainly for Germany operators. Depending on the rate and network environment, the download speeds could reach up to 21.6 Mbit/s and upload speeds achievable could reach to 5.76 Mbps. The features are similar to HUAWEI E3131, which is already available in the market since 2012.

 

Basic functions

The Huawei E3531 offers dual-band UMTS (900/2100 MHz) and quad-band GSM (850/900/1800/1900 MHz). The HUAWEI E3531 is SIM card unlocked and free for any operators. So the E3531 modem could be used in most countries in Europe, but only in the U.S. and parts of Asia, the HUAWEI E3531 can’t be used. With dimensions of 84x27x10, 5 mm, and weight of only 30 grams, the E3531 stick is very compact and slim, which makes it eas to take in hand or pocket when travelling.  Huawei E3531 has a connector for an external antenna, it helps user to get better signal strength in rural area where lower signal.

 

Connects In 15 seconds
The Huawei E3531 HSPA+ Surfstick software is supplied with the Huawei HiLink, which allows operation without additional software. Only drivers will be installed at the first plugging to the computer, all operating systems are supported on Windows XP/SP3. The complete configuration is done via a web interface in the browser.
HiLink Another advantage of the software: after plugging to PC for about 15 seconds, Huawei E3531 would automatically connect to the internet and PC can start surf freely. The E3531 can work with almost all sim cards completely, what’s more, the Huawei E3531 can auto setup the APN and automatically configures itself accordingly. Only the SIM PIN must be entered.

 

 

Available from the end of 2013
Huawei E3531 HSPA+ delivers the surf stick from the 4th Quarter of 2013 to the market. Here, the modem will be available in black and white colors and costs very few, unsubsidized and free for all SIM cards, of course. As an alternative, the Huawei E3331 (smallest surf stick in the world) has similar features and is already available.

 

Huawei B593 B593s-22 4G LTE Router Review

If LTE signal is already available in your area and you want to maximize the fast speed for 150Mbps, the Huawei B593 4G Router might be the best device to deploy this.

We had the LTE CPE B593 for about a few months and have tested it with Vodafone and Telekom 4G LTE networks (more often with Vodafone), not matter it has weak or no LTE signal in the house, condo and the office). The model number is B593s-22. Just like HUAWEI E5172, it’s a 4G LTE Category 4 WiFi Router.

The device B593 is with HUAWEI logo and no operator’s logo can be found.  So it is unlocked, we’re able to use it with local carriers. We’ve also tried the 3G/HSPA+ WiFi router (Huawei B683) before and have been well satisfied with it. Now the 4G LTE networks provide much faster connection speed and surfing experience, it’s time to use a 4G device to enjoy the great speed.

 

We used the Vodafone Prepaid LTE and Telekom prepaid SIM card, they both worked fine on Huawei B593 4G LTE Router. The SIM card slot is at the bode side of Huawei B593, below the SIM card slot, it’s the power button.

 

On the other side of the router, there are two buttons for WPS and Reset. WPS is to protect the WiFi security and Reset is help use to reset the settings to factory default.

Aside from the 4 LAN ports at the back, there’s also a USB 2.0 port so you can attached a HDD or flash drive for access to network storage. And there are two analog telephone ports beside the LAN ports. User can connect two telephones to this device.

For better signal strength, there are two plugs for external antennas to boost the signal in HUAWEI B593. If there’s no LTE in the area, LTE CPE B593 will switch to HSPA+/HSPA/3G automatically and work on the best networks available.

We went to test out the connection via Speedtest.net and got pretty good results. The device is available on 4gltemall.com but if you also need the external 4G antenna, it is sold separately for on 4gltemall.com with good price. To buy them together, you will get some discount.