Fibocom FG160-NA 5G NR Sub6 Module

Fibocom FG160-NA is a NR Sub 6 module backward compatible with LTE/WCDMA network standards. Powered by the Qualcomm Snapdragon® X62 modem chipset, the module delivers maximum downlink rates of 3.5Gbps and uplink rates of 900Mbps under 5G. Supporting NR CA, Fibocom’s FG160-NA module significantly optimises 5G user experience with extended coverage, boosted throughput and increased capacity, which is ideally suitable for the FWA market.

Fibocom FG160 module supports OpenCPU, optimising cost-performance and power consumption. With OpenCPU, FG160 can be developed into an ideal FWA solution, enabling 160MHz bandwidth, 4096 QAM as well as Wi-Fi 6E.

Fibocom FG160-NA adopts LGA form factor measuring 41x44x2.75mm. It is compatible with Fibocom's 5G module FG150. With multiple Internet protocols and industry-standard interfaces for main operating, FG160-NA can be used a variety of cellular terminals such as CPE, STB, IPC and ODU. The module is able to cover mobile network in North America.

Fibocom FG160-NA 5G Module Specifications:

* Product type: 5G NR Module

* Form factor: LGA

* Chipset: Qualcomm Snapdragon® X62

* Target Region: North America

* Support 5G Dual mode: SA/NSA

* Frequency bands:
- 5G NR (Sub6): n2/5/12/14/25/30/41/48/66/70/71/77
- 4G LTE: FDD B2/4/5/12/13/29/30/66/71 & TDD B41/46(LAA)/48
- WCDMA:
* MIMO:
- NR DL 4*4 MIMO: n2/5/12/14/25/30/41/48/66/70/71/77 & UL 2*2MIMO: n41/77
- LTE DL 4*4 MIMO: B2/4/5/12/13/30/41/48/66/71

* GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS

* Voice: CS Voice/ VoLTE/ VoNR

* SMS: SMS/ SMS over IP (IMS)/ SMS over NAS

* Operating Voltage: 3.315V ~ 4.4V, Typical 3.8V

* Operation Temperature: -30 ~ 75 ℃

* AT Command: 3GPP TS 27.007 and 27.005, Proprietary FIBOCOM AT Commands

* Size: 41x44x2.75mm

* Data rates:
- NR SA: Max. 2470Mbps DL / Max. 900Mbps UL
- NR NSA: Max. 3470Mbps DL / Max. 555Mbps UL
- LTE: Max. 1600Mbps DL / Max. 211Mbps UL
- WCDMA: Max. 42Mbps DL / Max. 5.67Mbps UL

* Interfaces:
- USB3.1/3.0(USB2.0 compatible)
- PCIe4.0
- UART
- SPI
- GPIO
- I2C
- SDIO
- UIM
- I2S
- GPIO
- UIM
- I2S
- eSIM: Optional

* Driver:
- USB: Linux 2.6.38 and later/Windows7&10/Android7.x&8.x&9.x
- RIL: Android7.x&8.x&9.x
- NDIS: Windows7&10
- ECM: Linux 2.6.38 and later
- Gobinet: Linux 2.6.38 and later

* MBIM: Windows 10 and later/Linux 3.8 and later

* QMI WWAN: Linux 3.4 and later

* Network Protocol: PAP/CHAP/IPv4/IPv6/LwM2M/APN/STK-OTA/STK-BIP/DTMF

* Regualtion: FCC*/IC*/RoHS*

* Operator: TMO**/ATT**/VZW**

* Industry: PTCRB*/GCF*/HF*