Fibocom FM160-EAU 5G NR Sub6 Module

Fibocom FM160-EAU is a 5G NR Sub 6 module with 3GPP Release 16, which is backward compatible with LTE/WCDMA network standards. Powered by the Qualcomm Snapdragon® X62 modem chipset, the module delivers maximum downlink rates of 3.5Gbps and uplink rates of 900Mbps under 5G, suitable for IoT applications that require high data throughput.

Fibocom FM160-EAU module adopts M.2 form factor measuring 30x52x2.3mm. It is compatible with Fibocom’s 5G module FM150. The module also supports multi-constellation GNSS receiver (GPS/ Galileo/ GLONASS/ BeiDou), which provides high-performance positioning and navigation while greatly simplifies product design. Meanwhile, it supports a rich set of interfaces including USIM, USB 3.1/3.0, PCIe 4.0 and PCM/I2S, allowing much flexibility and ease of integration for customer's application.

With multiple Internet protocols and industry-standard interfaces for main operating, FM160-EAU can be used a variety of cellular terminals such as CPE, STB, IPC and ODU. The module is able to cover mobile network in Latin America and Europe.

Fibocom FM160-EAU 5G Module Specifications:

* Product type: 5G NR Module

* Form factor: M.2

* Chipset: Qualcomm Snapdragon® X62

* Target Region: Europe, Latin America, Brazil

* Support 5G Dual mode: SA/NSA

* Frequency bands:
- 5G NR (Sub6): n1/3/7/28/38/40/66/78
- 4G LTE: FDD B1/3/5/7/8/28/66, TDD B38/40/42
- WCDMA: B1/5/8
- MIMO: NR DL 4*4 MIMO: n1/3/7/28/38/40/66/78 and LTE DL 4x4 MIMO

* GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS

* Voice: CS Voice/ VoLTE/ VoNR

* SMS: SMS/ SMS over IP (IMS)/ SMS over NAS

* Operating Voltage: 3.315V ~ 4.4V, Typical 3.8V

* Operation Temperature: -30 ~ 75 ℃

* AT Command: 3GPP TS 27.007 and 27.005, Proprietary FIBOCOM AT Commands

* Size: 30*52*2.3mm

* Data rates:
- NR SA: Max. 2500Mbps DL / Max. 900Mbps UL
- NR NSA: Max. 3500Mbps DL / Max. 555Mbps UL
- LTE: Max. 1600Mbps DL / Max. 211Mbps UL
- WCDMA: Max. 42Mbps DL / Max. 5.67Mbps UL

* Interfaces:
- USB3.1/3.0
- PCIe4.0
- GPIO
- UIM
- I2S
- eSIM: Optional

* Driver:
- USB: Linux 2.6.38 and later/Windows7&10/Android7.x&8.x&9.x
- RIL: Android7.x&8.x&9.x
- NDIS: Windows7&10
- ECM: Linux 2.6.38 and later
- Gobinet: Linux 2.6.38 and later

* MBIM: Windows 10 and later/Linux 3.8 and later

* QMI WWAN: Linux 3.4 and later

* Network Protocol: PAP/CHAP/IPv4/IPv6/LwM2M/APN/STK-OTA/STK-BIP/DTMF

* Regualtion:

* Operator:

* Industry: GCF*/ ANATEL