LTE Advanced- beyond the next Step

The evolution of LTE (Long Term Evolution) is already developed. LTE Advanced is to say the new technology.

 

The Third-Generation Partnership Project (3GPP) specifies in its Release 10, the objectives of LTE-Advanced. The mobile technology corresponds to the 3GPP LTE Release 8 LTE Advanced is to be backward compatible. Not only are the transfer rates expected to rise with LTE Advanced. The use of multiple antennas and the incorporation of relay stations are to be carried forward.

 

More bandwidth

The bandwidth is LTE-Advanced is significantly higher than the LTE in Release 8. Instead of 20 megahertz, LTE-Advanced can bundle multiple carriers and thus use up to 100 MHz simultaneously. Here may also be combined in different frequency bands, frequency ranges – important because no carrier has been on a continuous frequency range of 100 MHz. Currently these 100 MHz are only in theory, in practice more spectra are assigned. This can happen only in 2015 at the World Radio Conference (WRC). Until then, the bandwidth will probably be limited to 40 MHz.

Another innovation that will keep up with LTE-Advanced collection is called “relay nodes”, i.e. relay stations. This will allow, even outside the range of a base station to receive the signal. In the edge region the signal reinforces relay stations. Connected the relay stations means connected to the base station. Thus, the signal strength inside buildings can be improved.

Interference use

Another method that could be introduced with LTE Advanced is CoMP (Coordinated Multi-Point). This is a problem to be addressed, which often occurs, especially in densely populated areas. There where many transmission towers are in a confined space, to their ranges and signals often overlap. This interference occurring far as disorder should be used wisely with the CoMP process. If interference is likely, future base stations preprocess messages for multiple users together prior to transmission. By preprocessing, signals are superimposed on the desired user device design, but are eliminated at the antennas of other users.