Category: New Products

ZTE MF28B Rogers LTE Rocket Hub VS ZTE MF28G 4G LTE Router

As one of the main 4G LTE telecommunication equipment vendor, ZTE has presented many 4G LTE router to public, and most of them are already for operators’ contract plan. Unlike Huawei B593 4G LTE CPE many modification models, each of ZTE 4G LTE routers has specific modem name, even though they look almost same in appearance.

 

 

 

ZTE 4G LTE routers are designed in same appearance model, but they are not completely the same in some aspects.  Today, we will have a review of the difference between ZTE MF28B and MF28G 4G LTE Router.

 

 

Network Bands

 

Most of the routers with appearance differ on the network bands. They are for different operators. ZTE MF28B Router is for Canadian operator Rogers, and it’s also called Rogers LTE Rocket Hub, but MF28B Hub could support single LTE band 7 (2600MHz), 3G HSPA (850/1900MHz) network is backward. As we can, it mainly for 3G network in North America.

 

 

ZTE MF28G LTE Router is more powerful, it supports LTE dual-mode (TDD & FDD), it could support 4G TDD band 38 & band 40 (2300/2600MHz) and FDD band 7 & band 20 (800/2600). And ZTE MF28G supports 3G UMTS 900/2100MHz. ZTE MF880 4G LTE USB dongle could support these bands.

 

So unlocked ZTE MF28G could work with more 4G operators and in some countries, MF28G could replace MF28B.

 

 

Data Rate Speed

 

 

ZTE MF28B and MF28G could both reach peak downlink speed up to 100Mbps and uplink speed to 50Mbps on 4G FDD network. Simultaneously, MF28G could reach peak downlink up to 68Mbps and uplink speed to 17Mbps when working on TDD networks.

 

 

Interfaces

 

 

There are some adjustments in the bodies of the two ZTE LTE routers. MF28B has only 4 Ethernet ports (RJ45) while MF28G has 4 Ethernet. Ports, 2 RJ11 ports for telephone, and one USB 2.0 host port. So MF28G could support telephone and SD files sharing, but MF28B cannot.

 

 

Logo

 

 

Sometimes, the logo on the router may vary according to operators. And the firmware may also be customized for operators. As we can see, the Rogers LTE Hub ZTE MF28B has Rogers’s logo on it and the forms are version is also with Rogers logo.

 

 

 

Other features of the routers are almost the same, to conclude, Unlocked ZTE MF28G is powerful when roaming globally. In certain countries, MF28B may be reliable on 3G networks.

 

How to Setup ZTE MF91D 4G LTE Mobile Hotspot

With Mobile Broadband Router ZTE MF91D, you can connect 5 computers / wireless devices simultaneously. Here you will find information and guidance on how to set up and use the Wireless Mobile Broadband Router ZTE MF91D.

 

Get Started of ZTE MF91D:

Network name (SSID) and network key (WIFI KEY) can be found on the underside of the router on a sticker.

  1. Insert the SIM card.
  2. Turn on the router by holding the On / Off button for several seconds.
  3. Click the wireless network icon on your computer.
  4. Select Connect to a network / List available networks.
  5. Click on your network (SSID), select Connect.
  6. Enter the network key (KEY WIFI), press Connect.
  7. Open a web browser such as Internet Explorer and follow the wizard. We recommend creating your own wireless network name and password. After a few steps, enter a URL such as www.4gltemall.com

You are now connected to the Internet.

Getting into the menu of the MF91D router:

The router has a separate menu, where you will change the wireless network name and network key.

Getting into the menu of the router:

  1. Open a new browser such as Internet Explorer on a computer connected to the router. Enter 192.168.1.1 in the address field and press Enter.
  2. Enter Password: admin

Now you could change the password per your preference.

 

Restoring factory settings (reset) router:

If you experience problems connecting to the Internet, it may help to reset the router.

 

To reset the MF91D manually:

  1. Open the router.
  2. Press a paper clip / pin in the reset hole and hold for 10 seconds.
  3. The router turns on and off, and you can connect to the wireless network.

Now, after you reset the router, the network name and network password would be reset.

 

 

How to restore ZTE MF91D factory default:

  1. Open a new browser such as Internet Explorer on a computer connected to the router. Enter 192.168.1.1 in the address field and press Enter.
  2. Enter Password: admin
  3. Click Settings
  4. Select System Security then Default Settings.
  5. Press Restore
  6. Click Restore again to confirm.
  7. The router automatically turns on, and you can reconnect. Note that after you have reset the router, the network name and network password be reset. Have you changed the login password of the router, this is also reset.

 

 

Change the wireless channel:

Do you have low signal strength or difficulty finding the wireless network; it may help to change the wireless channel.

To change the wireless channel, you must enter the menu of the router. The computer must be connected wirelessly to the router to access the menu.

  1. Open a new browser such as Internet Explorer on a computer connected to the router. Enter 192.168.1.1 in the address field and press Enter.
  2. Enter Password : admin
  3. Select Settings
  4. Click Wi-Fi, then Advanced
  5. Select a channel from the dropdown below Frequency (Channel).

It is recommended to choose 1, 6 or 11. The channel 11 may work better than channel 1 in your home, so take your pick. Avoid channels 12 or 13 when some network cannot connect to them.

  1. Press Use. The settings are now saved.
  2. If you experience the same problem remains, repeat step 4 and try another channel that might work better on your computer.
  3. If you cannot find your wireless network, you should reboot the PC and router.

 

Switch between 4G, 3G and 2G networks

To do this:

  1. Open a new browser such as Internet Explorer on a computer connected to the router. Enter 192.168.1.1 in the address field and press Enter.
  2. Enter Password: admin
  3. Select  Settings, then Network
  4. Select Only 3G or only 2G from the drop down menu under Select Network.
  5. Press Use.

ZTE MF91D 4G LTE Pocket WiFi Hotspot Review

Smartphones are the ideal way to access the Internet on the go, but when you want to connect more WiFi device and help a friend to access internet, things seems bad. In these cases we have to use a mobile hotspot, which provides quick access to the Internet for more than one device at a time. This time I am getting to know more detail of ZTE MF91D 4G LTE Mobile Hotspot that could connects to the Internet via a super fast LTE/4G network.

 

Last time we introduced the 3G HSDPA access point ZTE MF80, which is quite similar to the new version. Of course, the main difference is that the model MF91D hotspot is for LTE/4G network.

 

Appearance of ZTE MF91D

At first glance, ZTE MF91D Hotspot reminded me those nice rounded tip cell phones, which were quite common and popular one. The 4G hotspot is pleasant, easy to stow in the pocket. The front side has a simple square color display that shows the status of network connection. Below the screen is a big button, when working, it flashes of blue light. On the left side we find a slot for microSD memory card  at the side the MicroUSB connector for charging. On the other hand, there are two connectors for external antenna and in the middle of them, there is a WPS button. ZTE MF91D is made of plastic, when first use, remove the back cover and the battery, below is the slot to insert the SIM card of normal size.

 

ZTE MF91d Settings

To access and use the access point ZTE MF91D, computer could get connected through the USB cable or do a wireless all together. In the first application, the easiest way is by using the cable, especially if you’ve got a new SIM card that is locked with a PIN code. When connecting to a computer, your MF91D hotspot offer installation of software that simplifies the process of setting and place a shortcut to the settings page (we checked it also works on Mac OS X). Usually, the MF91D hotspot could auto configure and get connected after SIM card is plugged in.

 

Once you have your device connected to the access point, either via cable or via WiFi, you could open a web browser by typing the title http://m.home/ or http://192.168.1.1 (the default password admin ). On the home page, you have an overview of the various settings links and an overview of the data usage. If you do not have special requirements, you can leave most of the settings alone, but usually you need to change your password to something that you will easily remember.

 

Advanced users could setup detailed security and configure network settings. In general Wi-Fi settings, you can define the maximum number of connected devices. Hotspot ZTE MF91D supports up to 10 devices simultaneously.

ZTE MF91D Hotspot in practice

In the past few days, I’ve tested ZTE MF91D access point in different situations. I tested it in the open air, in a meeting with two laptops and smart phones, when at home, up to six devices get connection at the same time and each time the Internet works fast without interruption.

 

 

Speed is of course just like cellular phones, it depends on how far you are from the base station. The occupancy of cells can affect the signal quality. The battery should support 6 hours of continuous use, which was confirmed by my tests.

 

 

Who is it for?

If you use the mobile internet mostly with your smartphone, you probably do not need mobile access point. If you often find yourself on the road even with a laptop or tablet without a SIM card, the ZTE MF91D 4G hotspot is more attractive choice because it has a relatively long life battery, and it is extremely easy to use. It can be used even in small office or home to connect multiple users at the same time, it supports up to as many as 10 devices at a time. What is most attractive, ZTE MF91D could support maximum download speed up to 100Mbps, so any connected users could surf internet in very high speed.

 

 

Of course, there is not only ZTE MF91D 4G LTE Mobile Hotspot, many other brand 4G Mobile Routers are available, welcome to check more on 4gltemall.com .

 

Unlocked Rogers LTE Aircard 330U from Sierra Wireless General Review

You may had seen a 4G LTE Modem which support 4G Band 4(1700/2100MHz) or 4G LTE Surfstick which is for 4G FDD Band 7 (2600MHz), but do you know any 4G USB modem that could support them together?

Today, we will recommend a 4G Aircard which could support the 4G LTE FDD Band 4 and Band 7 simultaneously. The model number is Rogers AirCard 330u LTE Rocket Stick. This is the successor of Sierra Wireless AirCard 320u. They are both from Sierra Wireless. The difference between them is that Aircard 330U is capable of LTE FDD Band 7 and Band 4, but AirCard 320U could support band 3 and band 7.

 

The Rogers LTE AirCard 330u looks cool in red color, but it’s unlocked to Rogers network. It means the AirCard 330u could support any operators’ SIM card.

 

 

Just like the brother model AirCard 320u, 330u is in square shape and it’s bigger than AirCard 306 or 308. The USB could rotate for 180 degree. On the front, There is logo of Rogers and one the back, there is printer of “4G LTE” on it. Below the “4G LTE”, we can see the icon of the manufacturer “Sierra Wireless” logo, and the indicator of data transmission.

 

 

Open the back cover, we could see there is a stick indicating the model number “AirCard 330u” and the IMEI number of the 330u. Belie the stick, we can see the SIM card slot and MircroSD card slot. At the side of the SIM card slot, there are two external antenna connectors for MIMO. They are covered by two small cap, user need open the cap and then connect the external antenna.

 

The connector of the external antenna is TS-9 model, so if you want buy external antenna for AirCard, you could check here: http://www.4gltemall.com/external-antenna-for-huawei-4g-lte-usb-modem.html

 

 

After plug the two external antennas, the data link speed would improve obviously. The AirCard 330u is apt for North America 4G LTE networks band 13 and band 7, so it could also roam in Europe or Asia. In conclusion, AirCard is a cool USB modem that will be a good gadget for 4G networks.

ZTE MF91 4G LTE Pocket WiFi Hotspot Test Report

The company ZTE from China has extensive experience in the manufacturing mobile phones; this fact has a positive impact on the shape and ergonomics of the mini router. Since the mobile device and should always be at hand, the shape and size of a mini router should allow to carry in any pocket or bag. Here we get the 4G LTE Mini Router ZTE MF91 Pocket WiFi Router. Let us have a look at this smart 4G LTE Router and how it works.

 

 

When we open the box, we can find these content are included in the package: ZTE MF91, power charger and USB Cable. The router is a standard rectangular box with rounded corners. On the front is a small screen and a single button switch. The user manual is also included.

 

 

To prepare the router to work, you must first insert a SIM-card. Open the back cover, take out the battery. Here we see at once the place for SIM-card, at which point you have to be careful. And put the card in a special tray to move it forward.

 

After the SIM card in the slot, put the battery in. Before you close the back cover of the machine, you must remember to write down the password for the Wi-Fi connection, it is printed on the back cover. Then just press the round button, wait a few seconds and the device is ready for use. This is what we signals appeared on the screen legend – ALTEL 4G.

 

 

Just want to say a few words on the screen, despite its small size (1.44 inches), it is quite informative in addition to network status and signal strength (by the way it’s showing with a symbol and the number of sticks like a conventional phone), the screen displays the status of Wi-Fi, the number of connected devices, and battery level.

 

In the center of the screen, we see the total time of using 4G data, as well as the total amount of data received/transmitted during this session. The device screen is quite bright, the information could be read, even in direct sunlight.

 

 

After switching on the router you just need to enter the password and connect it via Wi-Fi from your tablet, Smartphone or laptop. The manufacturer claims the simultaneous connection of 10 different WiFi devices.

 

The router is equipped with a powerful battery capacity of 2300 mAh, it is quite enough for me on day of use without switching off, and the network I was using for three hours, the rest of the time in standby mode. A full battery charge is approximately 2.5 hours.

 

 

The stated range of the router Wi-Fi signal could be distributed to 10-15 meters, my experience of operating in principle confirms these figures, and in a normal urban 2-room apartment, signal was available at any point. On the street, the range is from 8 m to 16 m, depending on the availability of natural environment.

 

In my opinion, the ZTE MF91 4G LTE Mobile router is very practical and convenient solution for wireless Internet in the format of 4G. Ergonomic shape, small size and relatively low weight (110 g) fully permit to carry with users. It could be easily fit into any pocket, bag or purse. If you want unlocked without any contract, welcome to buy from www.4gltemall.com .

Huawei E398S-81 4G LTE FDD TDD USB Surfstick Review

Comparing with Huawei E398 other branch models, such as Huawei E398u-1, E398u-18 and E398u-15, Huawei E398s-81 should be a special one, it’s not because Huawei E398s-81 has different appearance as other models, it’s due to Huawei E398s-81 supports the TDD & FDD LTE band simultaneously, which covers the 4G LTE TDD 2300/2600MHz and FDD 2600MHz.

 

 

As the one of the most frequency bands for TDD, band 38 (2600MHz) and band 40 (2300Mhz) are invested by many operators who are planning or already launched TDD networks.

 

 

Today, we get the Huawei E398s-81 4G LTE TDD FDD Surf stick with HUAWEI logo on it. It seems that it’s SIM card free and unlocked to any operators. Usually, if there is an operator’s logo on HUAWEI E398 modem, it may be a locked one, but the modem could be unlocked by some methods.

 

From the appearance, we could see that HUAWEI E398s-81 is just like other E398 branch models, with the rotatable USB design. There is only HUAWEI 4G on the USB. No other logo was printed on the back.

 

 

As previously mentioned, Huawei E398s-81 could support the LTE bands/Spectrum above: 4G LTE FDD 2600MHz and TDD 2300/2600MHz. This should be the most important difference between HUAWEI E398u-1, E398u-15 and E398u-18.

 

 

With same appearance of E398u-11 and E398u-15, Huawei E398s-81 has two external antenna connectors beside the two sides of Micro SD slot. If user wants to use data card with MIMO technology, HUAWEI E398s-81 is a good option optional. Here now, only few models of 4G LTE USB Surfstick are available on the market for both TDD and FDD networks. HUAWEI E398s-81 should be a good one based on HUAWEI prestige.

 

 

Unlike other E398 Modems, Huawei E398s-81 could not work with 3G UMTS network or 2G GSM/GPRS network. So Huawei E398S-81 could only work on 4G LTE networks. If 4G networks are not available in certain place, HUAWEI E398s-81 can’t work. So users may consider this before they buy it.

 

 

 

As the brother model, Huawei E392 4G FDD TDD multi-mode data card also has one similar model, the model number is Huawei E392u-92. HUAWEI E392u-92 supports 4G TDD 2300/2600 Mhz, but HUAWEI E392u-92 can’t support 4G FDD networks.

 

If you want know more details of them, welcome to buy it from www.4gltemall.com .

 

 

HUAWEI E5776 4G LTE Category Mobile WiFi Hotspot

Huawei introduced the Polish market its latest Wi-Fi Router model E5776 for high-speed network that supports LTE Category 4 at 150mbps download speed. At the same time, the company has released in stores App Store Google Play and WiFi 2.0 Mobile application for managing mobile routers from a smartphone.

 

 

Huawei E5776 4G LTE router provides access to the fastest fourth-generation LTE networks currently, offering download speeds Data up to 150 Mbps and 50 Mbps upload the data. This allows you to watch HD videos smoothly or conduct video calls with the highest quality picture and sound. The modem can also provide Internet to 10 devices such as mobile phones, tablets, computers, etc.. With a battery capacity of 3000 mAh, HUAWEI E5776 can work (according to the manufacturer’s declaration) to 10 hours without recharging.

 

 

The modem has a thin cover (15.5 mm), a simple form and a large TFT LCD screen, making it easy to set up, and thanks to the expandable device with a microSD card up to 32 GB, the Huawei E5776 can be used as a portable external drive.

 

 

HUAWEI E5776 LTE router can also be used for text messaging, through a simple Web interface, thus ensuring users to quickly create, send and receive SMS directly from your computer.

The Mobile WiFi 2.0 smartphone allows users to change settings, control data transfer, running mode savings energy, view text messages as well as backing up and restoring the router to factory default settings without having to access the web interface device.

 

And with the specially designed cradle HUAWEI AF22, HUAWEI E5776 could work like a 4G LTE CPE, more accurately, it should be a 4G LTE Cat4 CPE Router, to support up to 32 users access internet without interruption. And on the HUAWEI AF22 cradle, there is Ethernet port to output data. If you want more information, check on www.4gltemall.com

 

Huawei First Industrial LTE Small Cell Router Release

HUAWEI, the world’s top telecommunication equipments vendor, released the world’s first industrial LTE small cell router on April 15, 2013. The model number of the LTE Router is ATN905.

 

Different from other 4G LTE Routers, HUAWEI ANT 905 is to help small base stations to obtain high-rate media access across a variety of scenarios, allowing operators to extend backhaul network coverage.

 

Since many GCC service providers are trialing small-cell technology, HUAWEI believes simultaneous evolution to LTE will create further demand for solutions like the HUAWEI ATN 905.

 

Designed to meet the requirements for large base station router to deploy into small base, Huawei ATN 905 could support any media access, including fibre, GPON and xDSL, to offer additional resources for the existing network. HUAWEI ATN 905 has special features that it could get power supply through Ethernet ports, and plug-and-play.

 

HUAWEI ATN 905 should not be the last small cell router, following this model, there will be more and more ATN series LTE routers. It’s said ATN 905 could provide End-to-end IP RAN mobile backhaul solution with existing ATN products.

 

In addition, the ATN 905 OAM (operations, administration and management) functions can be used to monitor Ethernet faults, allowing operators to quickly locate problems in VIP private-line services, according to Huawei.

HUAWEI E5776 4G LTE Cat4 Mobile WiFi Hotspot

Without any doubt, Huawei is one of the leading companies in the world when it comes to quality and innovative LTE hardware. This time, HUAWEI E5776 4G LTE Router proves it again. Let’s have a look at what the router over the competition stands and where the benefits are. In addition, you will find all relevant key data as a table in the overview.

 

 

LTE features and characteristics of the E5776

Manufacturer and type designation

Huawei E5776

Download to rate

150 Mbit/s

Upload to rate

50 Mbit/s

supported LTE bands

LTE800, LTE900, LTE1800, LTE2100, LTE 2600

backward compatible with:

DC-HSPA +, UMTS, GSM frequencies (850, 900, 1800 and 1900 MHz)

MIMO Support:

MIMO 2×2

Connector for external antenna

yes, a antenna socket TS-9 is present

LTE category:

LTE modem, the Category 4 (3GPP Release 9)

Wireless

802.11 b/g n  up to 300 Mbit s, up to 10 devices simultaneously

Chipset

HiSilicon Hi6920

Other

Battery operating time &

Not replaceable 3300 mAh battery, up to 10 hours of run time

Info display (front)

1.45 inch TFT display

Dimensions (LxWxH)

107 mm x 66 mm x 16 mm, 150 grams

USB standard

USB 2.0

Memory card expansion

Yes, MicroSD up to 32 GB

Compatible Operating Systems

All, only WLAN is mandatory

Overview Datasheet (English)

Not yet available

Manual PDF

Not yet available

 

 

Since March 2013, the Chinese manufacturer Huawei starts to sell a new mobile LTE Router with built-in battery: Huawei E5776.  Users could get cutting-edge technology that is packaged in a compact and very well designed housing. Highlight is almost up to 150 Mbit/s fast LTE data radio with certainly the strong 3300 mAh battery, which provides up to 10 hours operating time before the router must be connected to the power adapter again. So the Huawei E5776 is one of the first routers that are compatible with LTE 4 Category technology. With smart appearance and ability to charge power via USB like mobile phones, HUAWEI E5776 would be a shining star for the 4G consumer electronics.

 

HUAWEI E5776 4G LTE Cat4 Mobile WiFi has a 1.45-inch display, this is a rather ingenious feature for the users. This feature was first installed in a LTE router Easybox 904. Also on the front is the on-off switch with integrated LED. Beside that you will find a connector for external antennas, the SIM-card slot and a slot for a microSD memory card. The micro USB port is not just for charging the built-in and non-removable batteries, but also to connect to the computer when PC doesn’t support Wi-Fi.

 

With Wi-Fi 802.11 b/g/n, up to 10 wireless devices could get the Internet connection from HUAWEI E5776. Bases on LTE CAT 4, it’s possible to get up to 150 Mbit/s download and up to 50 Mbit/s upload. What’s more, backward compatibility with GSM and UMTS is given. Supporting for five LTE frequency bands (800, 900, 1800, 2100, 2600 MHz), the LTE mobile router HUAWEI E5776 could use in most European and Asian countries.

 

 

Recommends the purchase?

 

Despite the current relatively high price, we can wholeheartedly recommend the Huawei E5776. Better technology is currently unavailable in any other LTE routers and thus the model is extremely future-proof. As a slightly cheaper alternative, HUAWEI E5776 is identical to the Speedbox LTE mini Telekom, which has a software branding. Unlocked HUAWEI E5776 should be a good option to surf under 4G networks. Here now unlocked HUAWEI E5776 is available on www.4gltemall.com . If you want to experience the fantastic speed from 4G, it’s necessary to get one.

 

 

 

HUAWEI AF23 4G LTE Sharing Router Review

After long time waiting, finally we get the Huawei AF23 LTE sharing dock today. Many clusters are eagerly looking forward to getting the New LTE sharing dock. Let’s have a review for this AF23 LTE Sharing router.

 

 

Like other Huawei 4G modems, Huawei AF23 is in original new box. There is plastic cover to see the AF23 directly from outside of the box. It’s in white color and looks very mini size. And at first glance at it, we are attracted by the USB slot on the face of AF23.

 

 

Open the package box, we can see the AF23 and one USB cable. Below the USB cable, it’s the power adapter. When we touch the Huawei AF23, we found it’s smaller than its predecessor Huawei D100. There are 5 indicators on the top face, besides the indicators, USB slot is there. Users could plug 3G or 4G modems here to change the 3G modem work like a 4G Wireless router.

 

 

At one side of Huawei AF23, there is an Ethernet port for connecting the network cable. So it could also change WLAN to WiFi. Jusst like the already available 4G LTE CPE Huawei B593u-12, HUAWEI AF23 supports maximum 32 users to access network.

 

 

On the back of Huawei AF23, there is a stick indicating the information about model number AF23, Power adapter information, FCC ID, SSID, Wi-Ki Key and IP address. And we can see the S/N and MAC number. There is logo of CE and RoHS, WiFi certified. At the side of the stick, there is the reset hole.

 

 

On the package box of HUAWEI AF23, it explains that HUAWEI AF23 LTE/3G Sharing Router:

 

* Support LTE USB dongles

* Support 3G USB dongles

* Wireless 2 x 2 design

* Up to 300Mbps transmission

* Up to 32 wireless connections

 

We had tested it with the HUAWEI E398 4G LTE USB Modem, and we will presents a report for HUAWEI E398 with the HUAWEI AF23 LTE Sharing Router.