Huawei S2700-26TP-PWR-EI-AC Switch
* 24 Ethernet 10/100 ports, 2 dual-purpose 10/100/1,000 or SFP
* AC power supply
* PoE+
* Forwarding performance: 6.6 Mpps
* Switching Capacity: 32 Gbit/s
Availability: In stock
Huawei S2700-26TP-PWR-EI-AC Switch is a next-generation energy-saving intelligent 100M Ethernet switch, which utilizes cutting-edge switching technologies and Huawei Versatile Routing Platform (VRP) software to meet the demand for multi-service provisioning and access on Ethernet networks. Huawei S2700-26TP-PWR-EI-AC Switch is easy to install and maintain. With its flexible network deployment, comprehensive security and quality of service (QoS) policies,and energy-saving technologies, the Huawei S2700-26TP-PWR-EI-AC Switch helps enterprise customers build next-generation IT networks.
Huawei S2700-26TP-PWR-EI-AC Switch features:
* 24 Ethernet 10/100 ports, 2 dual-purpose 10/100/1,000 or SFP
* AC power supply
* PoE+
* Forwarding performance: 6.6 Mpps
* Switching Capacity: 32 Gbit/s
Huawei S2700-26TP-PWR-EI-AC Switch Technical Specifications:
* Downlink Ports: 24 x 10/100 Base-TX Ethernet ports
* Uplink Ports: 2 dual-purpose 10/100/1,000 or SFP
* MAC Address Table:
- 8K MAC address entries
- Manual deletion of dynamic MAC address entries
- Aging time of MAC address configurable
- Black hole MAC address entries
- MAC address learning control based on ports
* VLAN Feature:
- 4K active VLANs, complying with IEEE 802.1Q
- Port-based VLAN assignment
- MAC address-based assignment
- Port-based QinQ
* QoS:
- Port-based rate limiting and flow-based rate limiting
- 4 or 8 queues of different priorities on each port
- Mapping between 802.1p priorities and queues
- SP, WRR, and SP + WRR algorithms
* IPv4 Routing: Static routing
* IPv6 Features: IPv6 protocol, Static IPv6 routes, Supports MLD v1/v2 snooping
* Multicast:
- MVLAN
- Controllable multicast
- IGMP v1/v2/v3 snooping
- Port-based rate limiting for multicast packets
* Reliability: STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), RRPP topology, and RRPP multi-instance
* Traffic Sampling: N/A
* Security and Access Features:
- 802.1x authentication and limit on the number of users on an interface
- Storm suppression
- IP Source Guard
- Multiple authentication methods including AAA, RADIUS, and TACACS+
- 802.1x authentication, MAC address authentication, MAC bypass authentication
- DHCP snooping
- Port isolation and sticky MAC
- Packet filtering based on MAC addresses
- Multicast suppression, broadcast, and unknown unicast packets
- Limit on the number of learned MAC addresses
- CPU defense
* Surge Protection: Surge protection capability of service ports: 7 kV
* Management
- Auto-config
- CLI-based configuration
- Remote configuration using Telnet
- SNMP v1/v2c/v3
- Remote network monitoring
- SSHv2
- Web-based device management
* Interoperability: N/A
* Operating Environment
- Long-term operating temperature: 23oF to 122oF (–5°C to 50°C)
- Relative humidity: 10% to 90% (non-condensing)
* Power
- Rated AC voltage: 100V to 240V, 50/60 Hz, Maximum voltage: 90V to 264V, 50/60 Hz
- Rated DC voltage: –48V to –60V, Maximum voltage: –36V to –72V
- Note: PoE models do not use DC power supplies.
* Dimensions (W x D x H): 17.4 in. x 16.5 in. x 1.7 in. (442 mm × 420 mm × 43.6 mm)
* Weight: <4kg (without power supply)
* Power Consumption: < 808W (PoE: 740W)