Huawei S5700S-28P-LI-AC Enterprise Switch
* 24x10/100/1000Base-T Ethernet ports, 4xGE SFP ports
* AC power supply, supporting Redundant Power Supply (RPS)
* Forwarding performance: 42 Mpps
* PoE not supported
* Switching Capacity: 256 Gbps
Availability: In stock
Huawei S5700S-28P-LI-AC gigabit enterprise switch is a next-generation energy-saving switch developed by Huawei to meet the demand for high bandwidth access and Ethernet multi-service aggregation. Based on cutting-edge hardware and Huawei's Versatile Routing Platform (VRP) software, the S5700S-28P-LI-AC provides a large switching capacity and high-density Gigabit Ethernet ports. Huawei S5700S-28P-LI-AC is for use in various enterprise network scenarios. For example, it can function as an access or aggregation switch on a campus network, a gigabit access switch in an Internet data center (IDC), or as a desktop switch to provide 1000 Mbit/s access for terminals. The S5700S-28P-LI-AC is easy to install and maintain, reducing workloads for network planning, construction, and maintenance. Huawei S5700S-28P-LI-AC uses advanced reliability, security, and energy conservation technologies, helping enterprise customers build a next generation IT network.
Huawei S5700S-28P-LI-AC Switch features:
* 24x10/100/1000Base-T Ethernet ports, 4xGE SFP ports
* AC power supply, supporting Redundant Power Supply (RPS)
* Forwarding performance: 42 Mpps
* PoE not supported
* Switching Capacity: 256 Gbps
Huawei S5700S-28P-LI-AC Switch Technical Specifications:
* Fixed port: 24x10/100/1000Base-T Ethernet ports, 4×1000Base-X SFP
* MAC Address Table:
- IEEE 802.1d compliance
- 8K MAC address entries
- MAC address learning and aging
- Static, dynamic, and blackhole MAC address entries
- Packet filtering based on source MAC addresses
* VLAN Feature:
- 4K VLANs,Guest VLANs, voice VLAN
- GVRP
- MUX VLAN
- VLAN assignment based on MAC addresses, protocols, and IP subnets, policies, and interfaces
- QinQ, Selective QinQ
- 1:1 VLAN mapping, N:1 VLAN mapping
* Reliability:
- RRPP ring topology and RRPP multi-instance
- Smart Link tree topology and Smart Link
- multi-instance, providing the millisecond-level protection switchover
- Smart Ethernet Protection (SEP)
- STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)
- BPDU protection, root protection, and loop protection
* IP routing: Static routing
* IPv6 features:
- IPv6 host
- Static IPv6 routes
- Path MTU (PMTU)
- IPv6 ping, IPv6 tracert
- IPv4 and IPv6 dual stack
- ACLs based on the source IPv6 address,destination IPv6 address, Layer 4 ports, or protocol type
- MLDv1/v2 snooping
* Multicast
- IGMP v1/v2/v3 snooping and IGMP fast leave
- MLD v1/v2 snooping
- Multicast VLAN
- Multicast load balancing among member ports of a trunk
- Controllable multicast
- Interface-based multicast traffic statistics
* QoS/ACL:
- Rate limiting on packets sent and received by an interface
- Packet redirection
- Port-based traffic policing and two-rate three-color CAR
- Eight queues on each port
- WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
- Re-marking of the 802.1p priority and DSCP priority
- Packet filtering on Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID
- Rate limiting in each queue and traffic shaping on ports
* Security & access
- User privilege management and password protection
- DoS attack defense, ARP attack defense, and ICMP attack defense
- Binding of the IP address, MAC address, interface, and VLAN
- Port isolation, port security, and sticky MAC Limit on the number of learned MAC addresses
- 802.1x authentication and limit on the number of users on an interface
- AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
- SSH v2.0
- Hypertext Transfer Protocol Secure (HTTPS)
- CPU defense
- Blacklist and whitelist
* Access Security: DHCP relay, DHCP server, DHCP snooping, and DHCP security
* Lightning protection Service interface: 6 kV
* Management and maintenance
- MAC Forced Forwarding (MFF)
- Virtual cable test
- Ethernet OAM (IEEE 802.3ah and 802.1ag)
- SNMP v1/v2c/v3
- RMON
- Web-based NMS
- NTP
- System logs and alarms of different levels
- DLDP
- 802.3az EEE(Energy Efficient Ethernet)
- sFlow
* Operating environment
- Operating temperature: 0°C to 50°C (long term);
- Relative humidity: 5%–95% (non-condensing)
* Power Supply
- Rated AC voltage: 100V to 240V, 50/60 Hz, Maximum voltage: 90V to 264V, 47/63 Hz
* Dimensions (W x D x H): 442 mm x 220 mm x 43.6 mm
* Power socket position: rear power socket
* Weight: <5kg
* Power Consumption: < 25W