H3C IM2209 eMTC/NB-IoT/E-GPRS Module

H3C IM2209 is a new multimode Module independently developed by H3C supporting eMTC/NB-IoT/E-GPRS standard and a variety of frequency bands. H3C IM2209 can offer GNSS and Beidou positioning service at the same time. And it can support at least 44 channel in GNSS.

H3C IM2209 adopts highly integrated design, putting the RF and baseband on same PCB to complete wireless data & signal sending and receiving. With LCC PAD interface, IM2209 support AT command and accept cutomization. H3C IM2209 successfully demonstrated the typical features of NB-IoT's long range coverage and ultra-low power usage.

H3C IM2209 Technical Specifications:

* Interface connector: LCC interface

* voltage: 3.1V ~ 4.2V (recommended value 3.8V)

* Working frequency:
- eMTC: Band39 @ LTE-TDD / Band3 / Band8 / Band5 @ LTE-FDD
- NB-IoT: Band3, Band5, Band8
- E-GPRS: Band5, Band8

* Data rates:
- eMTC:
> FDD 375Kbps (DL), 375Kbps (UL),
> TDD: 375Kbps (DL), 375Kbps (UL)
> Support Release 13 category M
- NB-IoT: 32Kbps (DL), 72Kbps (UL)
- E-GPRS: 384Kbps (DL), 160Kbps (UL)

* GNSS:
- frequency 1561MHz ~ 1602MHz @ GNSS
- Number of channels: ≥44 channels

* Positioning method: GPS, Beidou, GLNASS, Galileo

* A-GPS: Standby

* Receiving sensitivity
- Acquisition: -140dBm
- Tracking: -153dBm

* Start time
- Cold Start: 60S
- Warm Start: 45S
- Hot Start: <1S

* Operating temperature: -40 ℃ ~ +85 ℃

* ESD
- VBAT, GND: Air discharge ± 8KV, contact discharge ± 4KV
- RF antenna interface: air discharge ± 8KV, contact discharge ± 4KV
- Other interfaces: air discharge ± 2KV, contact discharge ± 500V

* Maximum transmit power
- Class3 (0.25W) for eMTC / NB-IoT
- Class12 (0.5W) for E-GPRS

* Power consumption
- Shutdown leakage current: 5μA
- PSM mode: 7μA

* Fixed way: LCC PAD welding

* Dimensions: 26.0 × 24.0 × 2.5 mm

* Weight: <5 grams

* AT command
- Supports standard AT instruction set (Hayes 3GPP TS 27.007 and 27.005)
- Support H3C extended AT instruction set