Huawei S5700-28C-EI Gigabit Enterprise Switch
* 24xEthernet 10/100/1000 ports
* Subcards supported: 4x1000Base-X SFP subcard, 2x10GE SFP+ subcard, and 4x10GE SFP+ subcard
* Double hot swappable AC/DC power supplies
* Forwarding performance: 96 Mpps
* Switching capacity: 256Gbps
Availability: In stock
Huawei S5700-28C-EI Gigabit Enterprise Switch is a next-generation energy-saving switches developed by Huawei to meet the demand for high-bandwidth access and Ethernet multi-service aggregation. Based on the cutting-edge hardware and Huawei Versatile Routing Platform (VRP) software, the S5700-28C-EI provides a large switching capacity and high-density GE ports to implement 10 Gbit/s upstream transmissions. The S5700-28C-EI is for use in various enterprise network scenarios.
Huawei S5700-28C-EI is easy to install and maintain, reducing workloads for network planning, construction, and maintenance. The S5700-28C-EI uses advanced reliability, security, and energy conservation technologies, helping enterprise customers build a next generation IT network.
Huawei S5700-28C-EI Gigabit Enterprise switch features:
* 24xEthernet 10/100/1000 ports
* Subcards supported: 4x1000Base-X SFP subcard, 2x10GE SFP+ subcard, and 4x10GE SFP+ subcard
* Double hot swappable AC/DC power supplies
* Forwarding performance: 96 Mpps
* Switching capacity: 256Gbps
Huawei S5700-28C-EI Switch Technical Specifications:
* Fixed port: 24x10/100/1000Base-T
* Extended slot: it provides two extended slots, one for an uplink subcard and the other for a stack card
* MAC Address Table:
- IEEE 802.1d compliance
- 32K MAC
- MAC address learning and aging
- Static, dynamic, and blackhole MAC address entries
- Packet filtering based on source MAC addresses
* VLAN Feature:
- 4K VLANs
- GVRP
- Guest VLAN and voice VLAN
- MUX VLAN
- VLAN assignment based on MAC addresses, protocols, and IP subnets, policies, and interfaces
- 1:1 VLAN mapping, N:1 VLAN mapping
* Reliability:
- RRPP ring topology and RRPP multi-instance
- Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
- Smart Ethernet Protection (SEP)
- ERPS (G.8032)
- BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM
- STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)
- BPDU protection, root protection, and loop protection
- E-Trunk
* IP routing: Static routing, RIPv1/v2, RIGng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, and ECMP
* IPv6 features:
- Neighbor Discovery (ND)
- Path MTU (PMTU)
- IPv6 ping, IPv6 tracert, and IPv6 Telnet
- ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
- MLD v1/v2 snooping
- IPv4 and IPv6 dual stack
- 6 to 4 tunnel, ISATAP tunnel, and manually configured tunnel
* Multicast
- IGMP v1/v2/v3 snooping and IGMP fast leave
- Multicast forwarding in a VLAN and multicast replication between VLANs
- Multicast load balancing among member ports of a trunk
- Controllable multicast
- Port-based multicast traffic statistics
- IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM
- MSDP
* QoS/ACL:
- Rate limiting on packets sent and received by an interface
- Packet redirection
- Port-based traffic policing and two-rate three-color CAR
- Eight queues on each port
- WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
- WRED (supported by the S5710-EI)
- Re-marking of the 802.1p priority and DSCP priority
- Packet filtering on Layers 2 to layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID
- Rate limiting in each queue and traffic shaping on ports
* Security & access
- User privilege management and password protection
- DoS attack defense, ARP attack defense, and ICMP attack defense
- Binding of the IP address, MAC address, interface, and VLAN
- Port isolation, port security, and sticky MAC
- Blackhole MAC address entries
- Limit on the number of learned MAC addresses
- 802.1x authentication and limit on the number of users on an interface
- AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
- SSH v2.0
- Hypertext Transfer Protocol Secure (HTTPS)
- CPU defense
- Blacklist and whitelist
* Management and maintenance
- iStack
- MAC Forced Forwarding (MFF)
- Virtual cable test
- SNMP v1/v2c/v3
- RMON
- Web-based NMS
- System logs and alarms of different levels
* Interoperability
- Supports VBST (Compatible with PVST/PVST+/RPVST)
- Supports LNP (Similar to DTP)
- Supports VCMP (Similar to VTP)
* Operating environment
- Operating temperature: 0°C to 50°C (long term);
- Relative humidity: 5%–95% (non-condensing)
* Input Voltage
- Rated AC voltage: 100V to 240V, 50/60 Hz, Maximum voltage: 90V to 264V, 47/63 Hz
* Dimensions (W x D x H): 442 mm x 420 mm x 43.6 mm
* Weight: <5kg
* Power Consumption: < 60W