Huawei S2309TP-PWR-EI Switch

* 8*10/100 BASE-T, 1 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports, PoE


* Layer 2 Ethernet Switch


* Forwarding Performance: 2.7Mpps


* Switching capacity: 3.6 Gbit/s


* Fixed AC Power


* VLAN-based Service Control

Sign up for price alert

Availability: In stock

$399.00

Worldwide express shipping and delivery without delay

Call us now for more info if you have any questions about our products

Qualified products and guarantee your money back if return.

Enjoy shopping and 5-star service here!

Details
Details

Huawei Quidway S2300 series switches are intelligent access switches for telecom customers. The S2300 is mainly deployed on the intranets and IP Metropolitan Area Network, carrying various Ethernet services. Huawei S2300 supports powerful lightning protection, ACLs, QinQ, 1:1 VLAN switching and N:1 VLAN switching etc.

 

Huawei S2309TP-PWR-EI Switch key features:


* 8*10/100 BASE-T, 1 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports, PoE

* Layer 2 Ethernet Switch

* Forwarding Performance: 2.7Mpps

* Switching capacity: 3.6 Gbit/s

* Fixed AC Power

* VLAN-based Service Control

* Software: Enhanced Version


Huawei S2309TP-PWR-EI Switch Technical Specifications:


* Fixed port: 8*10/100Base-TX ports, 1*10/100/1000Base-T or 100/1000Base-X port

* Processor: Dominant frequency: 200 MHz

* Switching capacity: 3.6 Gbit/s

* Forwarding performance: 2.7 Mpps

* DDR memory: 64 MB

* Flash Memory: 16 MB

* Backplane switching capacity: 32 Gbit/s

* MAC address table

- Supports 8K MAC address entries.
- Supports manual addition and deletion of a MAC address table.
- Supports configuration of MAC address aging time.
- Supports disabling of MAC address learning based on port or aggregation group.
- Supports limit on the number of MAC addresses to be learned on a port.
- Supports blackhole MAC addresses.

* VLAN features

- Supports IEEE 802.1Q (VLAN) and 4096 VLANs.
- Supports port-based VLAN.
- Supports MAC-based VLAN.
- Supports basic QinQ.
- Supports 1:1 VLAN switching.
- Supports N:1 VLAN switching.

* QoS

- Supports port rate limit and traffic rate limit.
- Supports four queues with different priorities on each port.
- Supports mapping of packets to different queues based on 802.1p.
- Supports multiple algorithms including SP, WRR, and SP+WRR.
- Supports traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, Layer-4 port number,protocol type, VLAN ID, Ethernet frame protocol type, and CoS.protocol type, and CoS.
- Supports traffic-based priority marking and packet redirection.

* IPv6 features

- Supports IPv6 host functions.
- Supports static route configuration.
- Supports IPv6 ACL.
- Supports MLD v1/v2 snooping

* Multicast

- Supports IGMP v1/v2/v3 snooping.
- Supports multicast load sharing among bundled ports.
- Supports port-based multicast rate limit and traffic statistics.

* Port mirroring

- Supports 1:1 or N:1 port mirroring.
- Supports Remote Switched Port
- Analyzer (RSPAN) and traffic-based mirroring.
- Supports packet forwarding on an observing port.

* Security

- Supports IEEE 802.1X authentication and the limit on the maximum number of users on a port.
- Supports dynamic ARP detection.
- Supports IP Source Guard.
- Supports multiple authentication methods including AAA, RADIUS, HWTACACS+, and NAC.
- Supports binding of the IP address,MAC address, port number, and VLAN ID.
- Support port rate limit.
- Supports port isolation, port security, and sticky MAC.
- Supports packet filtering.
- Supports packet filtering based on MAC addresses.
- Supports suppression of multicast, broadcast, and unknown single-cast packets.
- Supports limit on the number of MAC addresses to be learned.
- Supports CPU protection.

* Surge protection: Each port has a surge protection capability of 6 KV. Each port has a surge protection capability of 15 KV after an extra surge protection device is added.

* Management and maintenance

- Supports iStack
- Supports automatic configuration.
- Supports CLI configuration.
- Supports remote configuration and maintenance by using Telnet.
- Supports SNMP v1/v2/v3.
- Supports RMON.
- Supports HGMP v2.
- Supports SSH v2.
- Supports Web management.
- Supports GVRP.

* Operating environment

- 0°C to 50°C (long term); –5°C to 55°C (short term);
- relative humidity: 10% to 90% (non-condensing)

* Power supply

- AC: Rated voltage: 100 V to 240 V, 50/60 Hz
- Maximum voltage: 90 V to 264 V, 50/60 Hz

* Dimensions(mm): 320 (W) x 220 (D)x 43.6 (H)

* Weight: < 2.4 kg

* Power consumption: < 154 W, PoE power 124W

Reviews
Write Your Own Review
You're reviewing: Huawei S2309TP-PWR-EI Switch
How do you rate this product? *
  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Tags
Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)