![\"\"](\"https:\/\/www.4gltemall.com\/blog\/wp-content\/uploads\/2018\/07\/TP-Link-M7650-mobile-WiFi-screen.jpg\")
<\/a><\/p>\nTP-Link M7650 Specifications and Package<\/strong><\/p>\n As the most advanced 4G mobile WiFi hotspot<\/a>, TP-Link M7650 supports LTE Cat.11 with theoretically up to 600 MBit\/s in the download and 50 MBit\/s in the upload.\u00a0Simultaneous surfing is possible with up to 32 devices, namely via dual-band WLAN IEEE802.11a\/b\/g\/n\/ac with theoretically up to 300 MBit\/s on the 2.4 GHz and up to 867 MBit\/s on the 5 GHz band.\u00a0The 3000 mAh battery is designed to provide power for up to 15 hours of operation.\u00a0A microSD card slot donates up to 32 GB of additional storage space, provided you plug in an additional memory card.\u00a0The TP-Link M7650 router is controlled either via the display and two pushbuttons, via the tpMiFi app or a web interface.<\/p>\n <\/p>\n The TP-Link M7650 mobile WiFi<\/a><\/strong> is supplied in a blue metallic shiny cardboard packaging.\u00a0The dimension is 6.7 x 1.6 x 11.2 cm and fits into the jeans pocket.\u00a0The light gray case is slightly gummed, so the router does not slip easily out of hand.\u00a0On the top there is a glossy black plastic surface around the display that magically attracts dust and fingerprints.\u00a0At the left of this area is the menu button for the display, and the right of it is the power button, on a long narrow side the microUSB port for charging the battery.<\/p>\n <\/p>\n In the package, we found a USB cable, various short instructions and an adapter from Nano-SIM to Micro in addition to the 3000 mAh battery.\u00a0In the TP-link M67650 router, users can insert a micro-SIM, with adapter for a nano-SIM, but if with an old mini SIM, the router cannot be operated.\u00a0And TP-Link also provides a plug-in power supply for the router, which can be charged on the USB port. TP-Link M7650 Power on<\/strong><\/p>\n After unpacking, you should first take a look inside the small LTE router and, if necessary, make a note of some details or take pictures with your mobile phone.\u00a0Because the address and the password for the administration interface are located under the battery on the nameplate.\u00a0And on the inside of the lid, the password for the Wi-Fi hotspot is printed, which is also required for use.\u00a0The removal of the lid we found to be somewhat difficult, because you actually need long fingernails and some strength to reach into the notch of the lid on the device corner and then can lever up the lid.<\/p>\n \u00a0 The micro-SIM slot reminded us a bit of old Nokia phones.\u00a0First, the lock must be released and folded up.\u00a0After inserting the SIM, the lock is folded down again and locked.\u00a0If desired, a memory card can still be inserted, for the operation of the TP-link 4G router<\/a><\/strong> as an Internet access device that is of course not necessary.\u00a0Now the battery is inserted, the lid is closed and the hotspot is switched on or the battery is charged first.<\/p>\n In our test, the TP-Link M7650 recognized our LTE SIM card within a few seconds and connected to the mobile network.\u00a0The PIN query we had already disabled before inserting the SIM, if you do not do that, if necessary, enter the PIN.\u00a0On the 1.44-inch display, the top left of the power indicator is showing the technology used (in our case 4G).\u00a0In the middle above, the WLAN icon indicates how many devices are logged into the network.\u00a0At the top right is the battery level, in the middle of the display is the already used data volume and below is the network operator.\u00a0Now we could couple different devices via WLAN and surf.<\/p>\n TP-Link M7650: Settings, App, Speedtest, Battery & Conclusion<\/strong><\/p>\n The TP-Link M7650 can be administered in three ways: Some of the settings can be changed via the display and the two pushbuttons.\u00a0The menu is navigated by pressing the menu key several times.\u00a0Under “Device Info” users can display the WLAN password in plain text.\u00a0“Power Saving” allows to switch the energy saving mode on and off.\u00a0“WPS” couples the router to compatible devices, and “Wifi Band” allows switching between 2.4 and 5 GHz bands.\u00a0In “Network Mode” manual, switching between 3G and 4G is possible; 2G cannot be selected explicitly.\u00a0“Data roaming” allows the use of the router in data roaming; by default this feature is disabled.<\/p>\n <\/p>\n The web interface of the TP-Link M7650 router address\u00a0http:\/\/tplinkmifi.net <\/em>on a paired device, the default password is\u00a0admin<\/em>.\u00a0The third administration option is the app tpMiFi, which is available for\u00a0Android\u00a0and\u00a0iOS. Via the app or the web interface, more extensive settings can be made than via the pushbuttons and the display.\u00a0For example, it can be turned off that the Wi-Fi password appears on the display.\u00a0If the tariff allows it, SMS can be sent and received via the hotspot.\u00a0In addition, the administrator can set a data limit that can be maximized.\u00a0Unwanted WLAN clients can be locked out.<\/p>\n <\/p>\n TP-Link M7650 Performance<\/strong><\/p>\n In the speed test, the TP-Link M7650 scored very well in our test measurements.\u00a0We went to many places, where we knew that the mobile network reception is possible under almost optimal conditions.\u00a0There, the TP-Link M7650 effortlessly managed to reach the maximum possible 50 Mbps downstream with our SIM card, even several times.\u00a0For some test measurements, the value was even more than 60 Mbps downstream.\u00a0The upstream, which is actually limited to 10 Mbit\/s at our tariff, several times was even 12 Mbit\/s.\u00a0The ping was also very low with values of around 20 ms. But even in poorly supplied areas, the router showed that it can “tickle out” the maximum available locally from the network.\u00a0Stagnations or dropouts we did not notice.\u00a0In normal operation, the TP-Link M7650 router should not be warm, but in the blazing sun you should not operate it for a long time, as this could damage the plastic body and the battery.<\/p>\n TP-Link M7650 Battery<\/strong><\/p>\n In terms of battery life, TP-Link promises that the M7650 Router can last around 15 hours on a single charge.\u00a0In our experience, this value should be seen as the maximum value and ultimately it depends on the setting: If you turn off the power saving mode, the Wi-Fi hotspot is constantly on, and not only when a device requires a connection.\u00a0Of course, this sucks on the battery as well as any additional wireless client that contacts the LTE router<\/a><\/strong> for synchronization or data traffic.\u00a0Also, the operation in the car can “gnaw” at the battery capacity when the hotspot must “overcome” the metal shell of the car body to make contact with the mobile network and hold.<\/p>\n If the battery is fully charged, the energy-saving mode is switched on and about five to ten devices are connected to the M7650 hotspot, which is not more than ten meters away, the battery should in our estimation without problems last ten to twelve hours, so a whole working day.\u00a0In a building, you can also operate the router permanently at the socket – the battery problem is in any case only in one operation on the road.<\/p>\n The TP-Link M7650 proves to be a portable and robust router in the test, which can be easily put into operation and administered.\u00a0Depending on the mobile phone tariff used, fast surfing with up to 32 devices is possible.\u00a0The battery lasts around ten to twelve hours.\u00a0However, the LTE hotspot price is not a bargain and the quickly smeared plastic surface around the display is visually unattractive.<\/p>\n <\/p>\n Actually, there are many options of Portable LTE router available which can provide even faster speed such as the\u00a0Gigabit LTE router Netgear Nighthawk M1<\/a> and Huawei E5788<\/a>.\u00a0You\u2019d better check more before making the buy decision.<\/p>\n","protected":false},"excerpt":{"rendered":" We had introduced the TP-Link M7650 mobile WiFi hotspot a few days ago and somebody asked about the performance of this new 4G LTE WiFi Router. We will take a test today to see what the TP-Link M7650 mobile hotspot can bring to us. TP-Link M7650 Specifications and Package As the most advanced 4G mobile … Continue reading TP-Link M7650 LTE-A Pro Mobile WiFi Hotspot Test<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_exactmetrics_skip_tracking":false,"_exactmetrics_sitenote_active":false,"_exactmetrics_sitenote_note":"","_exactmetrics_sitenote_category":0,"footnotes":""},"categories":[694,3,3476,3477,3030,3671],"tags":[3843,2881,1969,3842,3844],"_links":{"self":[{"href":"https:\/\/www.4gltemall.com\/blog\/wp-json\/wp\/v2\/posts\/6304"}],"collection":[{"href":"https:\/\/www.4gltemall.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.4gltemall.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.4gltemall.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.4gltemall.com\/blog\/wp-json\/wp\/v2\/comments?post=6304"}],"version-history":[{"count":3,"href":"https:\/\/www.4gltemall.com\/blog\/wp-json\/wp\/v2\/posts\/6304\/revisions"}],"predecessor-version":[{"id":6307,"href":"https:\/\/www.4gltemall.com\/blog\/wp-json\/wp\/v2\/posts\/6304\/revisions\/6307"}],"wp:attachment":[{"href":"https:\/\/www.4gltemall.com\/blog\/wp-json\/wp\/v2\/media?parent=6304"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.4gltemall.com\/blog\/wp-json\/wp\/v2\/categories?post=6304"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.4gltemall.com\/blog\/wp-json\/wp\/v2\/tags?post=6304"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/strong><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\nConclusion: Good Portable LTE router for Wireless Connection<\/h3>\n