Month: October 2017

Huawei B618S-22D 4G LTE Cat11 WiFi Router

A brand new Huawei LTE router has been launched in Europe and is now available for purchase on www.4gltemall.com . This is Huawei B618s-22d. It is a rather remarkable product in LTE category 11! Yes, you may have read, it allows to reach 600Mbit/s for download and 50Mbit/s for upload theoretically. Of course, you will not be able to reach such bit rates immediately, but this augurs well for the importance that 4G (and later 5G) reception will take by the various wired networks in areas badly covered.

Huawei B618 B618s-22d 4G Router

The Huawei B618s-22d router is in compact design and it resembles its predecessor Huawei E5180 LTE CPE. The dimensions are 9.5cm long, 20.8cm high and 9.5cm thick. Its weight is 700 grams. It supports the 4G+ category 11 on the bands: 1/3/7/8/20/38 (FDD 800/900/1800/2100/2600MHz, TDD 2600MHz). It is therefore almost entirely compatible with all frequencies in Europe and other areas in Asia. But it’s a pity that it does not support the frequency 700MHz(B28).

Huawei B618 B618s-22d 4G Router

The proposed WIFI is a/b/g/n/ac on 2 bands (2.4Ghz and 5Ghz) and supports up to 64 connected devices. (Attention, theoretical data in laboratory, strongly dependent on wall thickness and other parameters.) At the LAN ports, there are 2 RJ45 gigabits and 1 LAN/WAN port. It is possible to connect an external antenna through the 2 TS9 ports. If you want to buy the external 4G/LTE antenna for Huawei B618, we had tested two external antennas for indoor and outdoor use:

Huawei B618 4G Router LTE Indoor External Antenna:

http://www.4gltemall.com/4g-antenna-two-ts-9-connector.html

4G LTE Indoor Antenna (2 x TS-9 Connectors) for Huawei/ZTE 4G LTE Modems/dongles/mobile hotspots

 

Huawei B618 4G Router LTE Outdoor External Antenna:

http://www.4gltemall.com/4g-lte-outdoor-antenna-2-x-ts-9-connectors.html

4G LTE Outdoor Antenna (2 x TS-9 Connectors) for Huawei/ZTE 4G LTE Dongles/aircards/modems/mobile hotspots

 

An RJ11 port allows you to connect a phone on it to make calls via the inserted SIM card (Provided you do not force the router only on the 4G so that it can switch to the other frequencies (3G) and your plan not only in data). The VOIP/SIP is available and configured in the web interface. A USB 2.0 port connects a hard drive or printer.

Huawei B618 B618s-22d 4G Router

More advanced settings are available as integrated DDNS, integrated VPN client, SMS sending/receiving … The SIM card must be in the MICRO SIM format. It has a multilingual interface that you manage from your computer to configure your network quickly and easily (DHCP, VOIP, FIREWALL, etc.) but is also compatible with the mobile application “Huawei Mobile WiFi” for a configuration via smartphone.

 

It has an on/off button which is handy to turn it off when you do not use it. Also, a WPS button (to connect wifi easily) and 8 LEDs will let you know the intensity of your 4G reception, WIFI activity, LAN activity, power, etc.

Huawei B618 B618s-22d bottom label

This Huawei B618s-22d is one of Huawei’s latest flagship router. Equipped with the latest technological innovations and in particular the 4G+ (category 11) 600Mbits/s, it will be suitable for those wishing to benefit from the current top LTE network. If you think the price is high, you may get satisfied with the lower level router Huawei B525s-23a or a Huawei B315s-22a that do their job right with almost half the price.

Huawei E5186s-22a 4G LTE Router for Home Use

Whether you had read our blog post, reports from some webistes, or other news, but you’ve surely noticed the incredible progress which has been made in mobile technology. Not long ago, 3G was the peak of the peaks, compared to 4G networks now, 5G is on the road to dominate.

 

Huawei E5186s-22a 4G LTE wireless router has been available in many countries for long time. As a pure 4G LTE router, it may not be cool like Netgear Nighthawk series router, but it do good job as expected for a 4G router.

In terms of Huawei CPE’s goals, it is no different from the similar wireless terminals used at home. Its job is to share the internet between different devices, supplementing them with a few extra amenities. Huawei E5186s-22a has more than usual gadgets that can accommodate a SIM card.

The E5186 router itself has a sleek design, much more beautiful than the predecessor 3G routers such as Huawei B683 and B970b Router. At the front, you can find a few white and mainly blue LEDs, including the power, mode, WiFi, Voice and signal indicators. The indicators tell users the current working status of the router.

 

The start-up goes exactly like a common device. Under power button, insert a SIM card, find your Huawei WiFi with your computer, enter the WiFi key on the sticker on the back of the gadget, open a browser window and enter 192.168.8.1. Here is an interface that will make you ready to complete all the security, administration, and other settings that people have on a router.

 

And that’s all we are and the internet connection would automatically be done. Of course, no matter what location you use, there is exactly the kind of network coverage or other environmental factors (walls, mountains, etc). The most important is that Huawei CPE E5186s-22a also supports the most advanced Cat6 LTE networks.

 

So far, I was pretty happy with my home provider and after running a speed test, it turned out that the download speed is far from the official saying about download speed of 300mbps. And the uploading can be done (33.57 Mbps / 16.20 Mbps / 20 ms ping), which is not quite exciting.

 

Actually, there is an alternative to provide better solutions to get a higher level LTE router such as Huawei B618S-22d. However, when ordering a new net, it is worth thinking if we are not going to do better with the 4G. Perhaps it’s not the problem of the Huawei E5186 CPE, what if the problem comes from the network environment fators?

 

Anyhow, the Huawei E5186s-22a could meet current home use for internet surfing. Even though 5G is coming, I think there is a long way to go to make the 5G devices budget and practical for common use. So let’s get E5186s-22a in white boxes, especially with a Huawei logo and a valid SIM card in them to enjoy the LTE surfing!

 

Test of TP-Link Archer MR200 4G Router

The TP-Link Archer MR200 Router is a feature-rich router built to maximize performance in your mobile broadband. We had a simple test to show more about TP-link MR200 router.

TP-Link Archer MR200 is a desktop 4G router. Unlike the Netgear AirCard 810 Mobile Hotspot we tested recently, Archer MR200 is not a router you can take to town (unless you know you’ll be near an electrical outlet). It is relatively large and clumsy and has no rechargeable battery. Instead, it is supposed to be used indoor where the router can get continuous power supply and then the broadband connection would be done quickly and easily.

It is also there, in a poor reception reception, the TP-Link Archer MR200 is supposed to show its strength, as it is equipped with a pair of solid external antennas to enhance the 4g reception.

User-friendly and feature-rich

Getting Started with TP-Link the Archer MR200 is really friendly. Just plug in with the 4G SIM card, turn on the router, enter the preset password that is written on the bottom of the router and start surfing.

When it is time to configure the 4g LTE router, this appears to be as easy and smooth as the installation itself. The interface is exemplary quickly, easily and clearly, even when we enter the more advanced settings.

Despite its rather simple exterior, the TP-Link Archer MR200 proves to be a truly functional and configurable router. Here it is in the top layer compared with competitors in the market.

 

Reception Good

Initially, the TP-Link Archer MR200 manages well in our performance tests. Reception is normal under normal conditions. The connection is always stable during the time we tested it. The WiFi results are slightly better. Here, the TP-Link Archer MR200 puts itself in the top level. The same good results goes for range tests, the TP-Link Archer MR200 gets good values ​​and performed better than most of tested routers.

 

But when we come to what will be the strength of TP-Link Archer MR200, the reception under difficult conditions, we will be a little bit disappointed. Instead of getting to the top, the TP-Link Archer MR200 turns out to be worse than the average. In fact, the TP-Link Archer MR200 is far below the newly tested mobile router Netgear AirCard 810. If you are located at somewhere with bad signal, you’d better choose a wireless router with connectors for external outdoor LTE antenna, which may help the router to get better 4G/LTE network, so you will enjoy the fastest possible network.

Conclusion

TP-Link Archer MR200 is not a bad router, but does not do all as what we expect from a powerful 4G router. When the router work in good network condition, it performs good, but if in bad condition areas, it has much space to improve to shorten the distance to its competitors. There are many similar 4G routers on the market that are more affordable than this one such as Huawei E5186, ZTE MF286 etc. At last, we have a look at the basic features of TP-link Archer Mr200:

Features of TP-Link Archer MR200

Manufacturer : TP-Link

Function : 4G router with ac-wifi

System Requirements: 2G/3G/4G LTE Mobile Broadband.

Wi-Fi: 802.11ac/b/g/n, Dual band 2.4/5 GHz.

Security: Wep, WPA, WPA2

Network Ports : 3 pcs, 1 pc wan/lan.

Connections: Charging connector, external antennas.

Screen: 2.4 inch color touch screen.

Size: 20.2 x 14.1 x 3.4 cm.

Other: 3 internal wifi antennas, 2 external 4g antennas.