How to Configure HUAWEI E5151 Ethernet Mode Settings

Last time, we introduced how to set up the 3G connection for HUAWEI E5151 mobile WiFi, today, we will introduce how to Configure the Ethernet Settings for HUAWEI E5151:

To configure the Ethernet Settings, the first 6 steps are same as setting up 3G connection. But this time is not plug SIM card, you need to plug Ethernet cable this time.

1. Then after land to Quick setup page, click next and creat the Profile name.

2. Then click to next step to the Configure Ethernet Settings. Choose the connection toy you are using, the country, account name and password.

3. Click to next step, you come to the Page of setting SSID and encryption type and WiFi password.

4. After settings, click to next page to confirm and finish to connect.

In 3-5 seconds, you could find the WiFi signal coming from Huawei E5151.

This is the general and quick set up of Huawei E5151 for common users, if you want advanced functions from Huawei E5151, you need to configure in Advanced Settings. We will introduce later on www.4gltemall.com/blog/.

Huawei E5151 3G Configuration and Setup Steps

As a special member of Huawei E5 family, Huawei E5151 3G Mobile WLAN and Ethernet Router is more and more popular in businessmen and tourist. Some users may be in trouble of using it. And the main problem is that they don’t know how to set up Huawei E5151 and configure the connection. Today, we will have a general introduction of how to set up and configure this WLAN router E5151.

 

 

Set up 3G Wireless Connection

 

  1. Plug 3G SIM card to Huawei E5151

 

  1. Just one button to power on the E5151.

 

3. Connect the WiFi signal from E5151(the SSID is on the back cover )

 

4. Land the web management page, the address is 192.168.8.1 (the address is different from its predecessor Huawei E586 or Huawei E5331)

5. Log in to set up( Default log name and password are both “admin”

6. The page will guide you to the Settings. And you will find there is guide for Quick Setup

7. Click Next to next step. Usually, Huawei E5151 would auto identify you SIM card and operator, and automatically configure the corresponding data, you just need to click Next to next step.

8. If not, you need to set up the Profile name, and APN of your provider. The profile can be any words, but APN must be right, it will determine whether you will get connected to network

 

9. Then click Next to the page of Configure Ethernet Setting. Since we are set up 3G connection, in this step, you should choose “LAN only” in the connection type. Then to next page

10. This step is to set up the SSID name and encryption password, you can set any name and password you like, but it would be better for you easily to remember them. Then click next to confirmation page. Click “Finish” and in 2 or 3 seconds, the E5151 could get connected with network and you can start surfing.

This is the general and quick set up of Huawei E5151 for common users, if you want advanced functions from Huawei E5151, you need to configure in Advanced Settings. We will introduce later on www.4gltemall.com/blog/.

 

To read more about:

How to configure HUAWEI E5151 Ethernet Mode Settings

 

 

EPC: A new core network for the new LTE radio technology

Many new transmission facilities to the cellular towers are visible part of the LTE structure.

 

The second, invisible to the public, is equally important part: The technology and infrastructure with which these new LTE transmission facilities are operated and controlled, the so-called core network, changes radically. This core network for LTE (Engineered packet-based core network) and Evolved Packet Core Evolved Packet or designated system. It basically works like the normal Internet, the technical term for this technology is an IP-based network or English an all-IP network. But what does that mean and how this network is different from a GSM network or a UMTS network, so what is the new in it?

GSM, UMTS and LTE networks: the differences

Put simply, the current mobile phone networks were completely fixed, or in large part on voice telephony. The GSM network, the second generation of mobile phone was originally designed as a pure network; other functions such as SMS and data transmission were then gradually it. The UMTS network calls and sending large amounts of data as equal functions together. The core network is divided into a part of UMTS, which provided fixed channels for the transmission of telephone calls (circuit switched) and one of the different data sets – like the Internet – transported.

The LTE network has – like the Internet – the absolute data priority. Telephoning is thus only one of many sub-functions of data transmission. A development is reconstructed, which is advanced in the fixed network have further calls is no longer handled through a separate channel, but runs as a Voice over IP over the Internet.

Which then affects the manner in which the LTE core network works: It is anything from one terminal to the other terminal to the Internet technology – are transmitted – the Internet Protocol, or IP. Technically speaking, it is an IP-based network or an all-IP network.

This fundamental change in the net makes the data transmission speed – both for downloading and sending, as well as in the reaction times. The Australian IT specialist Stuart Corner says: It is not primarily be the new LTE data radio technology, which allows high speed jumps, but most of all the new core network.

Signaling data: By registering for the bill

The new network is allocated differently: Over a part of running the so-called signaling data – for example, the registration of the participant in the network, its verification and identification, the location of their mobile device – the other part of the so-called user data – ie services that he accepts the scheme as phone or mobile Internet.

Among the parts that manage the signaling data and edit include Management Mobility Entity, short MME (Management of the mobile units), the Home Subscriber Server, short HSS (Subscriber Server) and the Policy and Charging Rules Function, briefly PCRF (fees office).

Logs in the MME to the mobile device, and then is forwarded to a location which the services – manages – ie the data transmissions. The MME also retrieves the information about the customer at HSS – because they are deposited there, in the GSM and UMTS networks had this customer database the name of Home Location Register (HLR). The PCRF can – depending on the rate – to specific data flows from that terminal or declines; it calculates how much the service costs at the rate reserved by the customer and shall issue an invoice.

User data: designing services funneled through the net

The services themselves are carried out in the so-called SAE gateway. The acronym stands for System Architecture Evolution Gateway – and said in German as the main interface for the network. This gateway consists of two areas: First, since the serving gateway is – short SGW in German about services portal. There the user’s terminal is managed by the application at the MME continues. It remains registered so when the user switches between two cell towers or when switching from LTE to a different wireless technology. It takes the data packets received by the user sends – for example by surfing – and forwards it to the exit.

The output is referred to as PDN Gateway, which is German for Public Data Network Gateway as portal to the public networks. And that is its function: Here the data to other networks – other mobile networks, Internet – forwarded and received the input data for the terminal of customers and forwarded.

 

Netcomm 4G100W 4G LTE WiFi Router Review

The LTE WiFi Router Netcomm 4G100W is a powerful LTE module that allows users to connect to global 4G/3G networks with peak speeds of up to 100Mbps (4G/LTE), 42Mbps (3G/HSPA +) downlink and 50Mbps (4G/LTE), 5 , 76 Mbps (3G/HSPA +) uplink.

 

The router creates an instant 300Mbps WiFi network with up to 16 wireless devices simultaneously may be close, like laptops, gaming consoles, iPads and smartphones.You can also use up to 4 wired devices and 2 USB 2.0 devices, so you can connect with computers and mass storage devices.

The Gigabit WAN / LAN port provides an alternative connection to a fixed line.

The device also features 4 internal antennas: 2x WiFi antennas delivering speeds up to 300Mbps and 2x 4G antennas. 

A powerful and secure LAN for home, office or on the road.

Perfect for

 

  • Creating your own powerful Wi-Fi hotspot and personal network with the speed of 4G broadband
  • Locations without fixed ADSL, cable or fiber connection available to
  • High bandwidth applications such as media streaming to connected devices
  • Use the Gigabit port for alternative connection to ADSL or fiber broadband
  • Creating your own storage network using the USB ports

Key Features

  • Connected to the 4G LTE network for high speed internet access
  • Falls back to HSPA + and LTE is not available
  • Delivers data rates up to 100Mbps downlink and 50Mbps uplink (LTE)
  • Gigabit Ethernet port configurable as WAN or LAN. Can then be used as an alternative connection for fiber or fixed telephony (WAN) or a fast connection to a LAN such as a NAS
  • 3 x 10/100 LAN ports for multiple wired connections
  • Provides a secure Wi-Fi network for up to 16 wireless devices, such as laptops, smart phones and game consoles
  • Local WiFi speeds up to 300Mbps
  • 2T/2R internal antenna configuration
  • 2 USB ports to create a network for mass storage devices
  • Ideal for homes and businesses without access to DSL or cable
  • Multiple users can use the connection, and a data beam portions so that the device is a cost-effective

How to Set Up Huawei E392 Wireless Connection

4G LTE modems are more and more popular, when users experience the new technology; they also face the problem about setting the new dongles.

 

Actually, it’s not difficult to set a 4G modem. Today we will have a short introduction of how to set up Huawei E392 4G LTE FDD TDD Surf sticks. Huawei E392 is the most popular 4G LTE dongle all over the world, that’s why we choose this modem.

 

 

First step, users must install the software- named Mobile Partner, to PC. For different operators, the version of Mobile partner may vary, but basic functions are the same. If there is already Mobile Partner, it’s better to uninstall it and reinstall the new. Of course, I mean the first time you use the 4G modem.

 

Secondly, after the drivers are installed to PC, it’s time to set up the modem. Sometimes, the mobile partner may cannot detect SIM card or detected the SIM card is invalid, you need to switch out the E392 Modem from the PC and pull SIM card out and Re-plug it. Usually, it’s due the slow reflection from PC. The 4G software is configured with many new technology of data transmission, when it runs, it may cause the PC system run very slowly.

 

 

After the Mobile partner detected Huawei E392 and the SIM. Now click the head column “tools”, there is “Options”, then you can see there are “General”, Text Message, Profile Management and Network.

 

And then in the Profile Management, you need set below information:

 

– Profile Name:  4GLTEMALL (It’s just a name, you could write any name you like, default starts automatically)

– APN: Static check

– APN: @@@ (you need to check the APN of your SIM card provider and then enter the right one)

– Access number: * 99 #

– User name: 4GLTEMALLCOM

– Password: 4GLTEMALLCOM

(User name and password could write anything you can remember)

 

Then set this profile as default and Click “OK”.

Next step, click Tools– Network.

There are 4 options in the dropdown-LTE only, WCDMA only, GSM only and Auto. If you are using 4G SIM card, you can choose “LTE only”, the other 3 options are also usable. But if you are using 3G card, “LTE only” is not workable. Usually, choose “Auto” is good to choose because the modem will switch automatically for users to choose available fastest speed. If the fastest network disconnect, the mobile partner will switch lower lever network and auto connects so that users could keep surfing.

After choose the network, click “apply” and “ok”, then back to home Manu. Click “Connect” button. You can easily get connected with network and access to surf.

 

This setting method is also applicable for HUAWEI 4G LTE USB Modem such as E398, E397 etc…So if you are in trouble using your HUAWEI 4G LTE Dongles, you can follow the steps to get 4G networks connected.