How to Update Huawei E5786s-32a Firmware

This article describes how to upgrade the Huawei E5786s-32a firmware to 21.297.03.00.309 firmware version. This update activates the Wi-Fi Extender function that is not implemented in the firmware of all E5786 routers, although it is mentioned in the technical specifications.

huawei e5786 pocket wifi

The Wi-Fi Extender function allows the Huawei E5786 router to switch from the 4G network to a WiFi network available around so that you can access the WiFi network, in order to save your Data plan. If the WiFi signal is lost, the router switches automatically to the data network.

 

huawei e5786 LTE 3G WIFI Offload

Disclaimer:

This operation is absolutely not supported by the manufacturer HUAWEI, in case of error during the operation of flashing of your firmware, you could make your router inoperative and totally out of service. At the slightest doubt or error message, do not continue the operation. On the other hand, by performing this operation, you lose all guarantees for your device, and any repair operation would be at your expense. We 4gltemall.com are not liable for any damages on your device if you carry out this operation which takes place at your own risk.

 

 

We started with the following versions of the software (firmware) and WEB GUI (UI) installed by default on the E5786 in our possession:

Hardware version: CL3E5786SM

Software version: 21.297.03.00.309

Web UI Version: 17.100.05.00.309

 

 

To upgrade to following software (firmware) and WEB GUI (UI) versions:

Hardware version: CL3E5786SM

Software version: 21.303.07.00.00

Web UI Version: 17.100.09.03.03

 

 

Update of the 24/11/2016(New versions):

Hardware version: CL3E5786SM

Software version: 21.313.17.00.00

Web UI Version: 17.100.14.01.03

 

The new firmware version essentially fixes security issues related to open-ssl.

 

First of all, you have to install the HUAWEI drivers, for this we recommend installing the application “Mobile WiFi” whose sources are on the flash memory of the router. This application installs the appropriate drivers for a full USB connection.

 

Use a good quality USB data cable to connect your router to your PC, we recommend that you use the one provided with the device. You should see a drive containing the application; we installed this application in version 1.12.00.309 on Windows 10 without difficulty. Once this application is installed, the firmware update program is able to communicate with the E5786 Router.

 

 

Operations

 

When your router is detected after launching the program, the program may ask you for a flash code or flashcode in a small window that opens, be careful, it is not a network unlock code, but a code that allows the firmware to be updated.

 

To obtain the code of flashing, it is necessary to identify the IMEI number of your device, it is generally written on the box and the body label of the device. We can give you the flashing code, this operation is absolutely free.

 

Download the firmware file © Huawei:

Huawei_E5786s-32a_Update_21.303.07.00.00.zip

(MD5 sum 392d4c74c7ab254fa42726959931a690)

Then download the WEB_UI © Huawei:

Huawei_E5786_WEBUI_17.100.09.03.03_NE5.zip

(MD5 sum c55a341dc5e9c6844c1f744d1fc57d39)

 

Update of 24/11/2016:

Download the firmware file © Huawei:

Huawei_E5786s-32a_Update_21.313.17.00.00.zip

(MD5 sum 4ae941e2b6d3a1a2b418f2c45f6fd11c)

Then download the WEB_UI © Huawei:

Huawei_E5786_WEBUI_17.100.14.01.03_NE5.zip

(MD5 sum b0f179cc2d875c23ed03c81a45610695)

 

 

In the following procedure, simply adapt the text according to the firmware and UI versions you are using. Start by running the firmware update 21.303.07.00.00. Make sure your PC is properly charged if you are using a laptop, and that your E5786 is also fully charged so you do not risk a battery failure during the software update. And the update process would not be suspended.

We recommend that you disconnect the network connection of the PC you are using and then disable your antivirus to avoid interference with the flash.

 

Then start the program Huawei_E5786_Update_21.303.07.00.00.exe right click “run as administrator” under Windows. A dialog box starts by scanning the USB ports of the PC looking for the device, if it does not find it; make sure that your drivers are properly installed. It is during this phase that the program is likely to ask you for the code of “flashing”.

 

 

Your device will restart, in principle your settings are retained, but you will have to re-enter the PIN code of the SIM card.

 

When the operation is finished, you must update the interface

Web UI Version: 17.100.09.03.03

 

Select the program 2_Update_WEBUI_17.100.09.03.03_NE5.exe right click “run as administrator” under Windows. The sequence is identical to the previous phase, but you will not be prompted for the flash code.

 

After updating the 2 elements, your interface offers several languages; choose the one that suits you.

HUAWEI E5786S-32A FIRMWARE UPDATE (1)

And you will see the new home page.

HUAWEI E5786S-32A FIRMWARE UPDATE (3)

 

In the new home page, you can see a WiFi Extender button at the right side of the ON/OFF and DATA buttons. In the settings you will now see a “WIFI Extender” column.

HUAWEI E5786S-32A FIRMWARE UPDATE (2)

This Wi-Fi Extender menu allows you to select a WiFi network and enter the security key. The priority menu is used to define whether the router should automatically connect to the WiFi network. Please note that now you will also find the Wi-Fi Extender menu in the Hilink app on Android or IOS as well as in the internal menu of the router.

 

If you would like to know more about Huawei E5786, welcome to click here: http://www.4gltemall.com/huawei-e5786-4g-lte-cat6-mobile-wifi.html

How to update the firmware of Huawei E5786

Huawei E5786 is world’s first LTE mobile hotspot with LTE Advanced Cat6 and WLAN ac, and it’s one of the fastest mobile LTE router on the market. Thanks to good facilities and powerful battery, Huawei E5786 is popular with many users. However, there is also a small problem with the device, which annoys some users recently.

Huawei has announced the E5786 in February 2014 with the so-called WiFi Extender feature, a feature that we already know from many other Huawei MiFi routers. However, Huawei provides the appliance with different firmware versions, in which some of the WiFi Extender is disabled. In this article, I want to show how to flash the firmware of Huawei E5786 to the version which is equipped with the WiFi Extender.

 
On some forums, we has found a firmware for the Huawei E5786 LTE router, a user who has already integrated the WiFi Extender function. The firmware should be OK with both the original Huawei E5786 and the unit from Germany Telekom (Telekom Speedbox LTE mini II ), at least there are already reports from users who have their device successfully updated to version 21.303.07.00.00. If one has a E5786 with telecom brand, after the flash, you will get a new firmware with no more branding. Below are the procedure how to update the firmware:

 

 

  1. download the Huawei E5786 new firmware zip and unzip all programs on PC
  2. Connect Router with USB cable and at least 10% battery(Better more !!)
  3. Starting the firmware .exe file with admin rights and follow the instructions
  4. also flash GUI. exe

After about 5 minutes of process, the flash should be completed. Some devices may require a Pin code to flash, it can be generated using IMEI number on relevant websites – here you should try Google shortly. I personally have no customized E5786 with telecom brand to test, but in the above linked LTE Forum, there are some opinions that are positive, so I decided to publish the guide here. Nevertheless:

Warning: After flashing the firmware, you lose any warranty. 
we have no liability for damage to the device.