How to Configure and Setup HUAWEI B890 LTE Wireless Gateway

HUAWEI 4G LTE Gateways are new for most of the users, but most of them are user-friendly and users don’t need many steps to configure. In most cases, the devices would automatically setup and connects to networks. Some users may want to set some parameters per their preference. Below is the user guide for your reference.

 

How to configure your terminal Intelligent 4G LTE Gateway Huawei B890

 

 A. Insert your SIM card

To take advantage of 4G LTE speeds on your providers’ network, you must use a 4G SIM card.

  1. Plug the power cable
  2. Insert the SIM card to the SIM card slot.
  3. Click the power button
  4. The device will turn itself.

 

 

B. After Connect to your computer to HUAWEI B890 4G LTE Smart Hub, you can login to HUAWEI B890 through wireless connection

The Intelligent Terminal Huawei B890 LTE Gateway can connect up to 32 wireless devices.

  1. Locate the sticky under your HUAWEI B890.
  2. Locate the SSID and WIFI Key line on the sticker.
  3. Use the information found on the sticker to connect your wireless devices.

 

 

 

C. Connect to Smart Hub for the first time and change the password

Once the Intelligent Terminal 4G LTE Huawei B890 is connected to your computer, log in and change the default password. The Smart Hub require change password the first time you connect.

  1. From your computer, open your Web browser.
  2. Type http://huawei.smarthub in the address bar.
  3. Box Username default should be “admin”.
  4. Type the password for the Admin account.  (NOTE: The default password is admin.)
  5. Press Enter or click Ok.
  6. Window Change the password of the connection opening appears.
  7. Enter the current password.
  8. Enter a new password.
  9. Confirm the password.
  10. Click Apply.

 

 

 

D. Configure your HUAWEI B890 LTE Wireless Gateway

Use the setup wizard to help you configure the Intelligent Terminal HUAWEI B890 4G Router.

  1. From your computer, open your Web browser .
  2. Type http://huawei.smarthub in the address bar.
  3. Box Username default should be admin.
  4. Type the password for the Admin account.
  5. Press Enter or click Ok.
  6. Click on Settings
  7. In the left column, click Quick Setup.
  8. If necessary, adjust the time zone on the page Welcome to the Quick Start Wizard. (NOTE: It is recommended to keep other default settings)
  9. Click Next
  10. The screen Configure the profile appears. (Make sure you type the right APN for your SIM card provider. NOTE: Keep the other default settings.)
  11. Click Next. .
  12. The screen Configure the WLAN setting appears. You can change the box SSID name, and enter the name you want to identify your network. It is recommended to keep SSID Broadcast to Enable.
  13. Click Next
  14. The screen Configure the WLAN setting appears. Select the type of authentication. (NOTE: It is recommended to use WPA2-PSK). Select the encryption method. (NOTE: It is recommended to use TKIP + AES.) Enter your WPA pre-shared key.
  15. Click Next
  16. Check your settings and click Finish to confirm.

 

ZTE MF65 3G Mobile WiFi Hotspot

More and more 3G Mobile hotspot is available now from ZTE.  ZTE MF65 is the new 3G HSPA+ mobile hotspot to share your 3G signal chip with up to 5 devices at the same time! With this mini modem router you can share the 3G internet with your chip or any device that has Wi-Fi or even a computer by connecting it via the USB cable! Possessing this MicroSD card slot mini router modem ZTE MF65, you can share the contents of any MicroSD card up to 32GB across the entire network! ZTE MF65 is one of the best mobile pocket routers to use at your home or in office!

 

ZTE MF65 Features:

* Place your MF65 and share 3g internet with up to 5 users

* Practical and fits in your pocket

* Wi-Fi 802.11b/g

* Safety standards: WEP/WPA/WPA2

* Supports microSD cards up to 32GB

 

 

Frequency Bands and Speed

– HSPA/UMTS: 2100

– HSUPA (UL) data upload up to 5.76 Mbps

–  HSDPA (DL) data download of up to 21.6 Mbps

 

Interface USB and Wi-Fi

* Wi-Fi standard: 802.11b/g

* USB: USB 2.0 high speed

* USB interface: USB Mini-B

 

Characteristics

* Slim design, white color, one button to power on and off

* Weight: 65g

* Dimensions: 99.5mm x 53.7mm x 14mm (Length x Width x Height)

* MicroSD: Supports memory cards up to 32GB

* Power adapter: 5V/700ma

* Battery: 1500mAh

* Approximate standby: 280 hours

* Approximate duration for full functionality: 4 hours

* Supported Operating System: Windows 7, Windows Vista, Windows XP (SP2 or higher) MAC 10.4 or higher.

 

You could more 3G Pocket WiFi router on www.4gltemall.com , and some good 4G Pocket WiFi also available for your consideration.

HUAWEI E5372 TDD/FDD 4G LTE Category 4 Mobile Router

HUAWEI Had released a new Mobile WiFi LTE Category 4 (LTE Cat4) E5372, 2×2 WiFi and supports standard operation in the 5GHz band. Measuring just 99mm x 62.2 mm x 14.4 mm, HUAWEI E5372 Mobile WiFi device is LTE Cat4 smallest and lightest in the world.

 

Provide full speed LTE data network to 150Mbps and with rechargeable battery up to 6 hours working time, HUAWEI E5372 can support 11 simultaneous connections to WiFi devices to access the LTE network.

 

 

 

“New Equipment HUAWEI E5372 reaffirms Huawei’s position as a pioneer in the global LTE industry and added to the list of world-class products an LTE mobile WiFi device Cat4 smallest” – he Wu Shimin, President of Mobile Broadband Product Line of Huawei Device said.

Weighs 130g, HUAWEI E5372 MiFi is really easy to use anytime, anywhere, helps transmit video data faster and simultaneous connections to 11 users, with coverage extended to 100m. E5372 saves costs with data network offload features can be automatically transferred to a secure WiFi connection as soon as possible. This device is also equipped with 2 external antenna interface helps users enhance the radio experience even in weak signal areas.

 

With Mobile Control 2.0 features updated E5372, you can control, access, use and change settings remotely via optional handset or tablet. The device also features SMS integration and sharing of security (secure digital – SD) to help users share files images, text, music and video from SD card via WiFi connection.

Conversion time less than 5 seconds and use a powerful 1780mAh battery, HUAWEI E5372 advanced mobile capabilities to operate independently and you can even use repeatedly in the absence of power. To ensure your mobile device is always with power, E5372 is also equipped with battery backup and charging, allowing you to recharge the handset or tablet when you move.

 

 

 

With the ability to optimize energy technologies Collaborative Power Control (CPC), discontinuous Connected Reception (CDRX), and Average Power Tracking (APT), MiFi E5372 helps reduce energy consumption by 30%.

 

HUAWEI E5372 device is white and will be published in the Italian market and Saudi Arabia this month. The other markets will have the presence of this product later. To check more mobile hotspot, welcome to land www.4gltemall.com

 

ZTE MF822 4G Aircard VS ZTE MF823 4G Modem

Since more and more people are using 4G network for their home or office, they improve the communication efficiency through high network connection speed. As one of the important telecom equipment sipplier, ZTE had releases many 4G Aircards for various operators. And more and more people know ZTE and ZTE 4G modems.

 

 

ZTE MF823 and MF822 are two of the hot 4G dongles. ZTE MF823 is the world’s slimmest 4G USB dongle. Due to the compacity requirement, the inner part of a 4G modem usually contains more contents so as to fulfill more functions and high demand for network. This feature makes 4G dongle in bigger body than 3G modems. ZTE optimized this feature and let MF823 in slim size, actually, some predecessor model of ZTE MF823 is also very big, many users feedback they don’t like the big body..

 

ZTEMF823 4G USB Stick is now available for O2 contract, the O2 LTE USB 4G could support 4G LTE FDD bands 3/7/8/20 (800/900/1800/2600MHz), which is for Germany 4G network. However, the unlocked ZTE MF823 would in other European countries, such France, Portugal, UK, Switzerland, Netherlands and Finland. Most of the 4G network frequency bands are similar, which makes the roam of ZTE MF823 come true. What’s more, ZTE Mf823 could work with most 4G operators in Asia and Middle East.

 

 

By the way, unlike the first generation 4G dongle from ZTE, MF823 is in compact USB design, the USB can’t rotate. The other model ZTE MF822 is one special one, it’s a 4G USB Modem for North America. It could support 4G LTE frequency band 4 and band 7 (1700/2100/2600MHz), which is mostly deployed in Canada and USA. ZTE MF822 is already available for Canada operator “Rogers”. To work with Rogers, the FCC certificate is necessary for the device. As we know, ZTE MF822 is the only model that combines 4G band 4 and band 7. So unlocked ZTE MF822 could work in Canada and also roam to work with some operators in USA. Frankly speaking, ZTE MF822 could also work with the operators in Asia and Europe who provider the LTE band 7. So MF822 is also powerful in the compatibility with global operators.

 

 

ZTE MF823 and MF822 are not brother models, but they are both LTE category 3 USB modem. They both support the peak download speed up to 100Mbps and upload speed up to 50Mbps. The speeds are amazing for the user to trip or surf outdoor, if you want unlock MF823 or MF822, welcome to visit http://www.4gltemall.com/4g-usb-modem/zte-4g-lte-modem.html .

 

 

ZTE MF91T 4G Router VS ZTE MF91S Mobile Hotspot

If you have many electronics in pocket and want them all access Internet, it’s a good idea to have a mobile pocket WiFi hotspot. Since 4G is becoming the mainstream, more and more 4G pocket WiFi is optional for users. As one of the wireless terminals supplier, ZTE has many mobile hotspot for users, such as ZTE MF91, MF91T, MF91s, MF91D etc… Many people feel confused by the model numbers.

 

 

Most times, we see the ZTE mobile hotspots are in the same blue package, from the 3G mobile hotspot to 4G, no new design element could be found. In the aspect, ZTE is not doing well. User can only see the model number from the back stick and can’t identify the broadband difference.

 

 

If you have ZTE MF91T and MF91s, you may be unable to tell from them. You may know they are both 4G TD-LTE mobile router, but what’s the really difference between then?

 

 

Usually, the main difference between the mobile hotspot is on the frequency bands. ZTE MF91T hotspot could support 4G TD-LTE band 38 and 40 (2300/2600MHz) and 3G HSPA+ 900/2100MHz. ZTE MF91S could also support TD-LTE band 38 and 40. What’s more, it also supports TDD band 39 (1900MHz) and FDD band 7(2600MHz). ZTE MF91s is specially for Chinese operator “China mobile”. So these 4G bands are for 4G network in China, and MF91s supports 3G TD-SCDMA & 2G GPRS.

 

 

The frequency band that the pocket WiFi supports is the main concern. Since the LTE technology difference, the connection speed may vary. ZTE MF91T could support maximum download speed up to 68Mbps while upload speed to 17Mbps. Since ZTE MF91s is a TDD/FDD dual-mode mobile hotspot, when working on TDD mode, ZTE MF91S could reach same speed as MF91T, but when working FDD mode, MF91s mobile router could reach peak download speed up to 100Mbps and upload speed to 50Mbps. From this aspect, we can see LTE dual-mode mobile hotspot is more flexible to adapt to the network environment.

 

 

 

Other features are almost the same because they comes from the same design, inner part is modified to suit different LTE networks. If you want unlocked ZTE MF91T or MF91s, welcome to buy from www.4gltemall.com